PB-503CLab Category: Trainers with Courseware Desktop Design Workstation & Courseware The Global Specialties PB-503C Lab is a comprehensive course in Analog and Digital Electronics which utilizes the PB-503 Circuit Design Workstation as a base for its experiments. The PB-503C Lab comes in a built-in carrying case for portability. Students will learn fundamentals of electricity all the way through combinational logic circuits and microcomputer concepts. Student will also learn by utilizing valuable handson breadboarding and experiment verification with the use of the PB-503 trainer. The program/lab comes complete with the PB-503 trainer, courseware and instructor guides. Product Features 3-year warranty on all parts and workmanship. Ideal for analog, digital and microprocessor circuits New high & low buffered logic indicators 8 channel logic monitor New 8 selectable logic switches Function Generator with continuously variable sine, square and triangle waveforms and TTL pulses Triple output power supply offers fixed 5 VDC supply plus two variable outputs: 1.3 to 15VDC Two Digital Pulsers Audio experimentation speaker Removable breadboard plate with additional plates available Multiple features in one complete test instrument saves hundreds of dollars necessary for individual units Included Courseware GSC-2301 GSC-2302 GSC-2311 GSC-2312 GSC-3200 GSC-3201 Electronic Fundamentals Student Text Electronic Fundamentals Instructor Guide Electronic Fundamentals Lab Manual Electronic Fundamentals Lab Solution Set Digital Electronics Text Digital Electronics Instructor Guide Specifications Power 3-wire AC line input (117V, 60 Hz typical) with power-on indicator. Both Models are available in 220-240VAC@50Hz o +5V@1.0A, ripple put Frequency Range o 0.1 Hz to 100 kHz in six ranges. Output Voltage o 0 to 10V (20Vp-p). Output Impedance o 600 ohms (except TTL). Output current o 10mA maximum, short circuit protected. Output waveforms o sine, square, triangle, TTL. Debounced Push-Button (Pulsers) o distortion d, open-collector output pulsers, each with one normally-open, one normally closed output. Each output can sink up to 250 mA. o Potentiometers o One 1 K ohm, one 10 K ohm, all leads available and uncommitted. BNC Connectors o Two BNC connectors, pin available and uncommitted, shell connected to ground. Switches o Two SPDT slide switches, all leads available and uncommitted. 8-pole DIP switch: one side of all eight switches connected and switchable to +5V or ground, other side of all eight switches separate, available, and uncommitted. Speaker o 0.25W, 8 ohms Breadboarding Area o Three UBS-100 sockets with 840 tie-points each for a total of 2520 uncommitted tie-points. Two QT-59B Bus strips internally connected to power and ground. Fifty tie-points each for +5V, +V,=15 V and ground. Enclosure o High impact molded case. Weight o 7 lbs Overall Dimensions o 6.5in H x 16in W x 11.5in D Part Number o 104-5030