MUR820PBF - International Rectifier

VRRM Peak Repetitive Peak Reverse Voltage 200 V

IF(AV) Average Rectified Forward Current 8 A

Total Device, (Rated VR ), TC = 150°C

IFSM Non Repetitive Peak Surge Current 100

IFM Peak Repetitive Forward Current 16

(Rated VR , Square wave, 20 KHz), TC = 150°C

TJ, TSTG Operating Junction and Storage Temperatures -65 to 175 °C

Parameters Max Units

MUR820PbF

Bulletin PD-20898 12/04

trr = 25ns

IF(AV) = 8Amp

VR = 200V

• Ultrafast Recovery Time

• Low Forward Voltage Drop

• Low Leakage Current

• 175°C Operating Junction Temperature

• Lead-Free ("PbF" suffix)

Features

Description/ Applications

International Rectifier's MUR.. series are the state of the art Ultra fast recovery rectifiers specifically designed with

optimized performance of forward voltage drop and ultra fast recovery time.

The planar structure and the platinum doped life time control, guarantee the best overall performance, ruggedness

and reliability characteristics.

These devices are intended for use in the output rectification stage of SMPS, UPS, DC-DC converters as well as

free-wheeling diode in low voltage inverters and chopper motor drives.

Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over

dissipation in the switching element and snubbers.

Absolute Maximum Ratings

Ultrafast Rectifier

www.irf.com

Case Styles

TO-220AC

MUR820PbF

Anode

Cathode

Base

Cathode

MUR820PbF

Bulletin PD-20898 12/04

2www.irf.com

VBR, VrBreakdown Voltage, 200 - - V IR = 100µA

Blocking Voltage

VFForward Voltage - - 0.975 V IF = 8A

- - 0.895 V IF = 8A, TJ = 150°C

IRReverse Leakage Current - - 5 µA VR = VR Rated

- - 250 µA TJ = 150°C, VR = VR Rated

CTJunction Capacitance - 25 - pF VR = 200V

LSSeries Inductance - 8.0 - nH .

Electrical Characteristics @ TJ = 25°C (unless otherwise specified)

Parameters Min Typ Max Units Test Conditions

Measured lead to lead 5mm from package body

trr Reverse Recovery Time --35 ns IF = 1.0A, diF/dt = 50A/µs, VR = 30V

--25 I

F = 0.5A, IR = 1.0A, IREC = 0.25A

-20- T

J = 25°C

34 TJ = 125°C

IRRM Peak Recovery Current - 1.7 - A TJ = 25°C

- 4.2 - TJ = 125°C

Qrr Reverse Recovery Charge - 23 - nC TJ = 25°C

-75 -T

J = 125°C

Dynamic Recovery Characteristics @ TJ = 25°C (unless otherwise specified)

IF = 8A

VR = 160V

diF /dt = 200A/µs

Parameters Min Typ Max Units Test Conditions

Parameters Min Typ Max Units

TJMax. Junction Temperature Range - 65 - 175 °C

TStg Max. Storage Temperature Range - 65 - 175

RthJC Thermal Resistance, Junction to Case - - 3.0 °C/ W

RthJA Thermal Resistance, Junction to Ambient - - 50

RthCS Thermal Resistance, Case to Heatsink - 0.5 -

Wt Weight - 2.0 - g

- 0.07 - (oz)

Mounting Torque 6.0 - 12 Kg-cm

5.0 - 10 lbf.in

Marking Device MUR820

Thermal - Mechanical Characteristics

c Mounting Surface, Flat, Smooth and Greased

Bulletin PD-20898 12/04

MUR820PbF

www.irf.com

Fig. 2 - Typical Values Of Reverse Current

Vs. Reverse Voltage

Fig. 1 - Typical Forward Voltage Drop Characteristics

Reverse Voltage - VR (V)

Fig. 3 - Typical Junction Capacitance

Vs. Reverse Voltage

0.1

100

0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8

T = 175˚C

T = 150˚C

T = 25˚C

0.001

0.01

0.1

100

0 50 100 150 200 250

150˚C

125˚C

100˚C

25˚C

T = 175˚C

100

1000

1 10 100 1000

T = 25˚C

Forward Voltage Drop - VFM (V)

Instantaneous Forward Current - I F

(A)

Reverse Voltage - VR (V)

Junction Capacitance - C T (pF)

Fig. 4 - Max. Thermal Impedance Z thJC Characteristics

t1, Rectangular Pulse Duration (Seconds)

Thermal Impedance Z thJC (°C/W)

Reverse Current - I R

(µA)

0.01

0.1

0.00001 0.0001 0.001 0.01 0.1 1

Single Pulse

(Thermal Resistance)

D = 0.50

D = 0.20

D = 0.10

D = 0.05

D = 0.02

D = 0.01

Notes:

1. Duty factor D = t1/ t2

2. Peak Tj = Pdm x ZthJC + Tc

MUR820PbF

Bulletin PD-20898 12/04

4www.irf.com

Fig. 5 - Max. Allowable Case Temperature

Vs. Average Forward Current

Fig. 6 - Forward Power Loss Characteristics

(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC

;

Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6);

PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = rated VR

Average Power Loss ( Watts )

trr ( nC )

036912

RMS Limit

D = 0.01

D = 0.02

D = 0.05

D = 0.10

D = 0.20

D = 0.50

Qrr ( nC )

100 100

IF = 16A

IF = 8 A

IF = 4 A

V = 160V

T = 125˚C

T = 25˚C

120

160

200

100 100

IF = 16A

IF = 8 A

IF = 4 A

V = 160V

T = 125˚C

T = 25˚C

130

140

150

160

170

180

036912

Square wave (D = 0.50)

Rated Vr applied

see note (2)

Average Forward Current - IF(AV)

(A)

Allowable Case Temperature (°C)

Average Forward Current - IF(AV)

(A)

Fig. 8 - Typical Stored Charge vs. di F /dtFig. 7 - Typical Reverse Recovery vs. di F /dt

/dt (A/µs )

di F

/dt (A/µs )

Bulletin PD-20898 12/04

MUR820PbF

www.irf.com

Fig. 10 - Reverse Recovery Waveform and Definitions

IRFP250

D.U.T.

L = 70µH

V = 200V

0.01

Ω

dif/dt

ADJUST

RRM

0.5

di(rec)M/dt

0.75 I

RRM

di /dt

Fig. 9- Reverse Recovery Parameter Test Circuit

Reverse Recovery Circuit

di F /dt

4. Qrr - Area under curve defined by t rr

and IRRM

5. di (rec) M / dt - Peak rate of change of

current during t b portion of t rr

1. diF/dt - Rate of change of current through zero

crossing

2. IRRM - Peak reverse recovery current

3. trr - Reverse recovery time measured from zero

crossing point of negative going IF to point where

a line passing through 0.75 IRRM and 0.50 IRRM

extrapolated to zero current

Q rr = t rr x I RRM

MUR820PbF

Bulletin PD-20898 12/04

6www.irf.com

3.78 (0.15)

3.54 (0.14)

10.54 (0.41)

MAX.

DIA.

15.24 (0.60)

14.84 (0.58)

2.92 (0.11)

2.54 (0.10)

TERM 2

14.09 (0.55)

13.47 (0.53)

3.96 (0.16)

3.55 (0.14)

0.94 (0.04)

0.69 (0.03)

4.57 (0.18)

4.32 (0.17)

30.61 (0.02) MAX.

5.08 (0.20) REF.

1.32 (0.05)

1.22 (0.05)

6.48 (0.25)

6.23 (0.24)

2°

0.10 (0.004)

1.40 (0.05)

1.15 (0.04)

2.89 (0.11)

2.64 (0.10)

2.04 (0.080) MAX.

Conforms to JEDEC Outline TO-220AC

Dimensions in millimeters and (inches)

Outline Table

Anode

Base

Cathode

LOT CODE

ASSEMBLY

RECTIFIER

INTERNATIONAL

IRMX Assembly Line

EXAMPLE:

ASSEMBLED ON WW 19, 2001

IN THE ASSEMBLY LINE "C"

LOT CODE 1789 LOGO

P = LEAD-FREE

PART NUMBER

WEEK 19

YEAR 1 = 2001

DATE CODE

THIS IS A MUR820

Part Marking Information

LOT CODE

ASSEMBLY

RECTIFIER

INTERNATIONAL

IRXC Assembly Line

EXAMPLE:

ASSEMBLED ON WW 19, 2001

IN THE ASSEMBLY LINE "C"

LOT CODE 1789 LOGO

WEEK 19

LINE C

PART NUMBER

DATE CODE

YEAR 1 = 2001

P = LEAD-FREE

THIS IS A MUR820

Bulletin PD-20898 12/04

MUR820PbF

www.irf.com

Ordering Information Table

Device Code

124

1- Ultrafast MUR Series

2- Current Rating (8 = 8A)

3- Voltage Rating (20 = 200V)

4-y none = Standard Production

y PbF = Lead-Free

Tube Standard Pack Quantity : 50 pieces

MUR 8 20 PbF

IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105

TAC Fax: (310) 252-7309

Visit us at www.irf.com for sales contact information. 12/04

Data and specifications subject to change without notice.

This product has been designed and qualified for Industrial Level and Lead-Free.

Qualification Standards can be found on IR's Web site.