SERIES 77 Lipped, 90 Angle Shrink Boots 770-006A Angled Long Tail Boot How to Order 90 Boots Lipped long tail, right angle heat shrink boots provide mechanical and environmental protection from damage and debris. Long tail boots provide additional strain relief compared to standard length boots. These shrink boots fit most standard boot adapters for circular connectors. All adhesive lined and unlined shrink books are RoHS compliant. Shrink boots are water-tight when equipped with factory installed or user-installed adhesive. Lipped boots lock into boot groove located on adapter. Choose boot size based on adapter diameter and cable diameter. How to Order 770 Product Series 770 = Series 77 shrink boot Basic Number 006 = lipped, long tail boot Angular Function A = 90 Material See material and adhesives table Boot Size 01, 02, 03, 04, 05, 06, 07, 08, 09; see dimensions table Adhesive Lined Omit for no adhesive; See material and adhesives table Potting Port or Drain Hole PP = potting port DH = drain holes -006 A 1 03 W1 -PP Omit for none Material and Adhesive Compatibility Material Code C Sample Part Number 1 2 3 5 6 7 8 9 Material Description (Compound No.) W1 High Temperature -55C to 125C Hot Melt Adhesives W2 W3 (TACOM approved) Standard Elastomeric -55C to 70C -55C to 125C High Performance Epoxy Adhesives R U Pre-Coat Two-Part -75C to 150C -75C to 155C High-Performance Semi-Rigid Elastomer (2025) Zero Halogen Semi-Rigid Polyolefin (2010) General Purpose Flexible Polyolefin (2040) Viton Fluoroelastomer Blend (2050) High Performance Elastomer Alloy (2051) Semi-Rigid Polyolefin (2071) Low Outgassing Fluoropolymer Alloy (2008) Material Type 8 not available with pre-coat adhesive. Use Type U two-part epoxy Low Temp Flexible Polyolefin (2013) Type U epoxy adhesive is compatible with all boot materials. Ordered separately, user-installed (779-001). Order boot with no adhesive lining. AS85049/141 Part No Cross Ref. NOTES 1.See Modification Codes listed in Section A for material color options available for Type 1 (compound 2025) material. Boot Size 01 02 03 04 05 Glenair Part Marking A01 A02 A03 A04 A05 AS85049/140 AS85049/141* 09 10 11 12 Boot Size 06 07 08 09 Glenair Part Marking A06 A07 A08 A09 AS85049/140 AS85049/141* 13 14 15 16 *See GS85049/141 for mil qualified 90 shrink boots C-28 (c) 2017 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * Series 77 Full Nelson Shrink Boot Catalog U.S. CAGE code 06324 * Dimensions in Inches (millimeters) are subject to change without notice. SERIES 77 Lipped, 90 Angle Shrink Boots 770-006A Angled Long Tail Boot Dimensions Lipped Right Angle Adapter Shrink Boots: Dimensions PO Ce Cr GLENAIR Ae 90 Boots ct R 90 - AS SUPPLIED 90 - RECOVERED at C Ar Dimensions Boot Size 01 02 03 04 05 06 07 08 09 Ae DIA MIN .620 (15.7) .886 (22.5) .984 (25.0) 1.181 (30.0) 1.378 (35.0) 1.476 (37.5) 1.772 (45.0) 1.969 (50.0) 2.469 (62.7) Ce DIA MIN .620 (15.7) .886 (22.5) .984 (25.0) 1.181 (30.0) 1.378 (35.0) 1.476 (37.5) 1.772 (45.0) 1.969 (50.0) 2.469 (62.7) Ar DIA MAX .290 (7.4) .433 (11.0) .591 (15.0) .748 (19.0) .827 (21.0) 1.181 (30.0) 1.339 (34.0) 1.575 (40.0) 1.850 (47.0) at 30% .054 (1.37) .059 (1.5) .059 (1.5) .071 (1.8) .071 (1.8) .079 (2.0) .079(2.0) .091 (2.3) .100 (2.5) A0 Ref .500 (12.7) .551 (14.0) .591 (15.0) .591 (15.0) .787 (20.0) .787 (20.0) .984 (25.0) .984 (25.0) 1.00 (25.4) Cr DIA MAX .125 (3.17) .256 (6.5) .295 (7.5) .335 (8.5) .374 (9.5) .413 (10.5) .472 (12.0) .551 (14.0) .690 (17.5) ct 20% .043 (1.1) .047 (1.2) .047 (1.2) .047 (1.2) .047 (1.2) .047 (1.2) .047 (1.2) .059 (1.5) .059 (1.5) PO 10% 90 4.000 (101.6) 4.142 (105.2) 4.882 (124.0) 5.760 (146.3) 6.780 (172.2) 7.291 (185.2) 8.409 (213.6) 8.839 (224.5) 8.949 (227.3) R REF .558 (14.2) .728 (18.5) .780 (19.8) .819 (20.8) .858 (21.8) .961 (24.4) 1.079 (27.4) 1.161 (29.5) 1.311 (33.3) For materials Type 2, Type 3 and Type 9, dimension 'Ce' is nominal Lipped Right Angle Shrink Boots: Part Marking, Raised Lettering EXPANDED RECOVERED C (c) 2017 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * Series 77 Full Nelson Shrink Boot Catalog U.S. CAGE code 06324 * Dimensions in Inches (millimeters) are subject to change without notice. C-29