SAF3602EL/V3040AY - NXP SEMICONDUCTORS

1. General description

The SAF360x is a monolithic integrated digital terrestrial radio processor. The SAF360x

family includes different chip variants—SAF3600, SAF3601, SAF3602, SAF3604,

SAF3606, SAF3607. The SAF360x provides reception, demodulation, audio decoding

and application processing for various digital radio standards.

The SAF360x system-on-chip (SoC) is a next generation HD Radio/DAB/DAB+/T-DMB/

DRM solution for breakthrough in system integration and cost reduction. The chip is

qualified in accordance with AEC-Q100 and includes the following features:

•Next generation HD Radio / DAB / DAB+ / T-DMB / DRM solution for breakthrough in

system cost reduction

•Dual channel processing with on-chip dual DAB front-end, memory and source

decoding

•End-of-production line programmability

•DAB-FM / DAB-DAB blending

•Advanced reception improvement algorithms

•Integrated an ten n a splitte r en ab lin g an te nn a diver sity

•On chip volt age regulation for performance critical Front-end supply via an external

transistor from 3.3 V (SAF3601, SAF3602, SAF3604, SAF3606 only)

•Single system XTAL with optional clock reference output capabilities

•Small PCB footprint using state-of-the-art BGA package

2. Features and benefits

2.1 HD Radio technology

HD Radio signal decoding for AM and FM digital audio

Supports HD Radio single, dual and triple tuner use cases

HD all-digital mode support

SAF3604: On-chip FM-tuner for data service reception

Dual baseband input interface using I2S-bus derivative with I/Q

Secondary baseband interface for dual tuner applications

Data services support for HD Radio reception

Electronic Program Guide (EPG)

Off-chip LOT processing

Enhanced reception through Maximum Ratio Combining (MRC)

SAF360x

Digital radio and processing system-on-chip

Rev. 3 — 23 January 2015 Product short data sheet

LFBGA223

Product short data sheet Rev. 3 — 23 January 2015 2 of 15

NXP Semiconductors SAF360x

Digital radio and processing system-on-ch ip

For detailed list of supported features, contact NXP Sales; see Section 11.

2.2 DRM

DRM signal decoding for AM and FM digital audio

Prepar ed for dual DRM support with background scanning or data services from

second station

Frontend to baseband interface through serial I2S-bus type interface

Prepar ed for secondary baseband interface for du al tuner applications

Channel decoder re ception improvements

Supports xHE-AAC codec

Prepared for DRM+

2.3 DAB, DAB+ and T-DMB radio technology

Dual reception processing with on-chip dual DAB fr ont-end, ADC, memory a nd source

decoding

Data service reception and filtering

Full dual ensemble processing (2 1.8 Mbit/s)

Optional third tuner input via serial I2S-bus type interface

Integrated DAB-FM/ DAB-DAB time alignment and seamless blending

Integrated support for all actual audio codecs (AAC, HE-AAC, MP2, BSAC)

(Optional) Additional fe atures:

Reception improvement algori thms for single antenna systems delivering

additionally improved BER

Diversity reception improvement through advanced Maximum Ratio Combining

(MRC) algorithms leveraging dual antenna diversity

Third external tuner supports enabling background service scan or data services in

case of two primary Saturn tuners are used for antenna diversity reception

2.4 Digital audio

Up to 6 channel (5.1) audio support through TDM audio interface or triple I2S

Programmable audio sample rate converter (8 kHz to 48 kHz) for up to 6 channels

I2S audio input for auxiliary processing

Optional SRC (8 kHz to 48 kHz) for I2S-bus input

Optional support for input and output 96 kHz sample rate conversion

Basic audio processing for external digital audio sources

Advanced audio processing (contact NXP for a list of supported audio processing

features; see Section 11)

2.5 Other peripheral interfaces

Two I2C-bus interfaces

Two Serial Peripheral Inter faces (SPI)

One High-Speed Serial Peripheral Interface (HS-SPI)

One UART interface

16 individual GPIO pins for applications and diagnostics

Product short data sheet Rev. 3 — 23 January 2015 3 of 15

NXP Semiconductors SAF360x

Digital radio and processing system-on-ch ip

One JTAG interface for diagnostics

2.6 Additional features

Secure boot, image authenticat ion

Identical radio architecture with the same chip and specific software for various

standards including DAB, HD Radio and DRM

Radio control reuse from SAF356X with same API

In field software upgrade possibility

One internal clock oscillator and two internal Phase-Locked Loops (PLL)

Powerful signal, audio processing core architecture

Qualified in accordance with AEC-Q100

Remark: Not all features are available on all variants or in all combinations. Contact NXP

sales for more information; see Section 11 “Contact information”.

3. Applications

Application depends on usages an d reception standard

4. Quick reference data

Table 1. Quick reference data

Symbol Parameter Conditions Min Typ Max Unit

Supply voltages

SAF3601, SAF3602, SAF3604, SAF3606

VDDA(VREG)(3V3) voltage regulator analog supply voltage 3.0 3.3 3.6 V

VDDA(ADPLL1)(1V8) ADPLL1 analog supply voltage 1.71 1.8 1.89 V

VDDA(XTAL)(1V8) crystal analog supply voltage 1.71 1.8 1.89 V

VDDA(DCO1)(1V8) DCO1 analog supply voltage 1.58 1.8 1.89 V

VDDA(DIV)(1V8) DIV analog supply voltage 1.71 1.8 1.89 V

VDDA(LVHFA)(1V8) LVHFA anal og supply voltage 1.71 1.8 1.89 V

VDDA(VHFM)(1V8) VHFM analog supply voltage 1.71 1.8 1.89 V

VDDA(DCO2)(1V8) DCO2 analog supply voltage 1.58 1.8 1.89 V

VDDA(ADPLL2)(1V8) ADPLL2 analog supply voltage 1.71 1.8 1.89 V

VDDA(ADC)(1V8) ADC analog supply voltage 1.71 1.8 1.89 V

VDDD(ADPLL1)(1V8) ADPLL1 digital supply voltage 1.71 1.8 1.89 V

VDDD(ADPLL2)(1V8) ADPLL2 digital supply voltage 1.71 1.8 1.89 V

VDDD(RFE)(1V8) RFE digital supply voltage 1.71 1.8 1.89 V

VDD(IO) input/output supply voltage 3.0 3.3 3.6 V

VQPS OTP programming voltage (2.5 V) 2.25 2.5 2.7 V

VDD(A) analog blocks supply voltage 1.14 1.2 1.26 V

VDD(C) core supply voltage 1.14 1.2 1.26 V

Product short data sheet Rev. 3 — 23 January 2015 4 of 15

NXP Semiconductors SAF360x

Digital radio and processing system-on-ch ip

SAF3600, SAF3607

VDD(IO) input/output supply voltage 3.0 3.3 3.6 V

VQPS OTP programming voltage (2.5 V) 2.25 2.5 2.7 V

VDD(A) analog blocks supply voltage 1.14 1.2 1.26 V

VDD(C) core supply voltage 1.14 1.2 1.26 V

Supply currents

SAF3601, SAF3602, SAF3604, SAF3606

IDDA(xxx) +

IDDD(xxx)

combined front-en d supply currents DAB 1.8 SW Stack - 460 560 mA

IDD(A) analog supply currents DAB 1.8 SW Stack - 15 20 mA

IDD(IO) input/output supply current DAB 1.8 SW Stack - 40 55 mA

IDD(C) core supply curren t DAB 1.8 SW Stack - 400 460 mA

SAF3600, SAF3607

IDD(A) analog supply currents HD 1.5 SW Stack - 15 20 mA

IDD(IO) input/output supp ly current HD 1.5 SW Stack - 40 55 mA

IDD(C) core supply curren t HD 1.5 SW Stack - 260 310 mA

Power dissipation

SAF3601, SAF3602, SAF3604, SAF3606

Ptot total power dissipation DAB 1.8 SW Stack - 1.53 1.93 W

SAF3600, SAF3607

Ptot total power dissipation HD 1.5 SW Stack - 0.46 0.61 W

Table 1. Quick reference data …continued

Symbol Parameter Conditions Min Typ Max Unit

Product short data sheet Rev. 3 — 23 January 2015 5 of 15

NXP Semiconductors SAF360x

Digital radio and processing system-on-ch ip

5. Ordering information

Table 2. O rdering information

Type number Package

Name Description Version

SAF36xxEL/Vyyyz LFBGA223 plastic low profile fine-pitch ball grid array package; 223 balls SOT1322-1

Table 3. Type overview

Not all variants are commercially released. Please contact NXP Sales for further details.

Type number Main application Internal tuners Clock

HD subtypes

SAF3600EL/V1040 single tuner use case No 55.46667 MHz

SAF3600EL/V1041 single tuner use case No 10.4 MHz – 12.288 MHz

SAF3600EL/V1042 dual and triple tuner use cases No 55.46667 MHz

SAF3600EL/V1043 dual and triple tuner use cases No 10.4 MHz – 12.288 MHz

SAF3604EL/V3040 dual tuner use case with one internal tuner Yes (one FM tuner) 55.46667 MHz

DAB subtypes

SAF3601EL/V3040 single tuner use case Yes (one DAB tuner) 55.19220 MHz, 55.46667

MHz

SAF3602EL/V3040 dual and triple tuner use cases Yes (two DAB

tuners) 55.19220 MHz, 55.46667

MHz

DRM subtypes

SAF3607EL/V1040 single tuner use case No 55.46667 MHz

SAF3607EL/V1041 single tuner use case No 10.4 MHz – 12.288 MHz

Premium

SAF3606EL/V3040 all standards (HD, DAB, DRM); single, dual

and triple tuner use cases Yes (two DAB tuners

or one FM tuner) 55.19220 MHz, 55.46667

MHz

xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx

xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x

xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx

xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx

Product short data sheet Rev. 3 — 23 January 2015 6 of 15

NXP Semiconductors SAF360x

Digital radio and processing system-on-chip

6. Block diagram

Fig 1. Block diagram — SAF3601, SAF3602, SAF3604, SAF3606

ROM SRAM SECURITY

ENGINE

DIGITAL FILTER

AND

SRC

DIGITAL

RADIO

DSP

AUDIO

AND

APPLICATION

PROCESSOR

DMA

ENGINE

Baseband

interface 1 Baseband

interface 2 RESET_N

WB-ADC

CLK VREG

1V8

3V3

RESET CGU GPIO

JTAG

CONTROLLER

JTAG 16x GPIO

WB-ADC

DAB III/FM-1

RF in 76-108 MHz

RF in 167-240 MHz

RF in 76-108 MHz

RF in 167-240 MHz

RF in 1452-1492 MHz

DAB III/FM-2

DAB L

BRIDGE

UART I2C I2C SPI1

(flash) SPI2

(host) HS-SPI

(data) aaa-007752

SAF360x

AUDIO

SRC

I2S in/Aux Baseband interface TDM/

3x I2S out

xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx

xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x

xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx

xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx

Product short data sheet Rev. 3 — 23 January 2015 7 of 15

NXP Semiconductors SAF360x

Digital radio and processing system-on-chip

Fig 2. Block diagram – SAF3600 , SAF3607

ROM SRAM SECURITY

ENGINE

DIGITAL FILTER

AND

SRC

DIGITAL

RADIO

DSP

AUDIO

AND

APPLICATION

PROCESSOR

DMA

ENGINE

Baseband

interface 1 Baseband

interface 2 RESET_N

CLKRESET CGU GPIO

JTAG

CONTROLLER

JTAG 16x GPIO

AUDIO

SRC

BRIDGE

I2S in/Aux Baseband interface TDM/

3x I2S out UART I2C I2C SPI1

(flash) SPI2

(host) HS-SPI

(data) aaa-007753

SAF360x

Product short data sheet Rev. 3 — 23 January 2015 8 of 15

NXP Semiconductors SAF360x

Digital radio and processing system-on-ch ip

Fig 3. System block diag ram – SAF3601, SAF3602, SAF3 604, SAF3606

aaa-007762

ANALOG RADIO DEVICE

AUDIO POST

PROCESSING

STEREO AUDIO DAC

(optional)

SAF360x

Blend

control

Digital

audio

Digital audio

output

HOST

MICROPROCESSOR

DATA RENDERING

(STANDARD RELATED):

- LIVE TRAFFIC REPORTS

- STOCK TICKERS

- SLIDESHOWS

Control data

Digital

baseband

inputs

Main DAB III/FM

Aux DAB III/FM

DAB-L

FLASH

MEMORY

FLASH

MEMORY

Fig 4. System block diagram – SAF3600, SAF3607

aaa-007751

ANALOG RADIO DEVICE

AUDIO POST

PROCESSING

STEREO AUDIO DAC

(optional)

SAF360x

Blend

control

Digital

audio

Digital audio

output

HOST

MICROPROCESSOR

DATA RENDERING

(STANDARD RELATED):

- LIVE TRAFFIC REPORTS

- STOCK TICKERS

- SLIDESHOWS

FLASH

MEMORY

FLASH

MEMORY

Control data

Digital

baseband

inputs

Product short data sheet Rev. 3 — 23 January 2015 9 of 15

NXP Semiconductors SAF360x

Digital radio and processing system-on-ch ip

7. Limiting values

Table 4. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).

Symbol Parameter Conditions Min Max Unit

Voltages

SAF3601, SAF3602, SAF3604, SAF3606

VDDA(VREG)(3V3) voltage regulator analog supply voltage

(3.3 V) 0.5 +3.9 V

VDDA(ADPLL1)(1V8) ADPLL1 analog supply voltage 0.5 +2.4 V

VDDA(XTAL)(1V8) cryst al analog supply voltage 0.5 +2.4 V

VDDA(DCO1)(1V8) DCO1 analog supply voltage 0.5 +2.4 V

VDDA(DIV)(1V8) DIV analog supply voltage 0.5 +2.4 V

VDDA(LVHFA)(1V8) LVHFA analog supply voltage 0.5 +2.4 V

VDDA(VHFM)(1V8) VHFM analog supply voltage 0.5 +2.4 V

VDDA(DCO2)(1V8) DCO2 analog supply voltage 0.5 +2.4 V

VDDA(ADPLL2)(1V8) ADPLL2 analog supply voltage 0.5 +2.4 V

VDDA(ADC)(1V8) ADC analog supply voltage 0.5 +2.4 V

VDDD(ADPLL1)(1V8) ADPLL1 digital supply voltage 0.5 +2.4 V

VDDD(ADPLL2)(1V8) ADPLL2 digital supply voltage 0.5 +2.4 V

VDDD(RFE)(1V8) RFE digital supply voltage 0.5 +2.4 V

VDD(IO) input/output supply voltage 0.5 +3.9 V

VQPS OTP programming voltage (2.5 V) 0.5 +2.7 V

VDD(A) analog blocks supply voltage 0.5 +1.7 V

VDD(C) core supply voltage 0.5 +1.7 V

SAF3600, SAF3607

VDD(IO) input/output supply voltage 0.5 +3.9 V

VQPS OTP programming voltage (2.5 V) 0.5 +2.7 V

VDD(A) analog blocks supply voltage 0.5 +1.7 V

VDD(C) core supply voltage 0.5 +1.7 V

Input voltages/current

Viinput voltage 0.5 +VDD(IO) V

SAF3601, SAF3602, SAF3604, SAF3606

Vi(VHF)(diff) peak differential VHF input voltage between pins

VHF_MAIN_IN_P and

VHF_MAIN_IN_N

pins VHF_AUX_IN_P

and VHF_AUX_IN_N;

AC coupling

-+1.7V

Vi(L-band) pe ak L-band input voltage pin LBAND_IN; AC

coupling -+1.7V

Product short data sheet Rev. 3 — 23 January 2015 10 of 15

NXP Semiconductors SAF360x

Digital radio and processing system-on-ch ip

[1] In accordance with AEC-Q100-002 Rev E, JS-001, 2014, Class C1.

[2] In accordance with AEC-Q100-002 Rev E, JS-001, 2014, Class 2.

[3] In accordance with AEC-Q100-011 Rev C1, Class C5.

[4] In accordance with AEC-Q100-011 Rev C1, Class C3.

[5] All supply voltages below the maximum values listed in this table.

VESD electrostatic discharge voltage human body model [1] 1500 1500 V

charged device model

corner pins [3] 750 750 V

other pins [4] 400 500 V

Ilu latch-up current [5] 10 10 mA

SAF3600, SAF3607

VESD electrostatic discharge voltage human body model [2] 2000 2000 V

charged device model

corner pins [3] 750 750 V

other pins [4] 400 400 V

Ilu latch-up current [5] 100 100 mA

Temperature

Tamb ambient temperature 40 +85 C

Tstg storage temperature 65 +150 C

Table 4. Limiting values …continued

In accordance with the Absolute Maximum Rating System (IEC 60134).

Symbol Parameter Conditions Min Max Unit

Product short data sheet Rev. 3 — 23 January 2015 11 of 15

NXP Semiconductors SAF360x

Digital radio and processing system-on-ch ip

8. Package outline

Fig 5. Package outline SOT1322-1 (LFBGA223)

References

Outline

version European

projection Issue date

IEC JEDEC JEITA

SOT1322-1 MO-205

sot1322-1_po

12-01-02

12-01-23

Unit

mm max

nom

min

1.45

1.30

1.20

0.35 0.45 12.1 12.1 10.4 0.15 0.1

Dimensions (mm are the original dimensions)

LFBGA223: plastic low profile fine-pitch ball grid array package; 223 balls SOT1322-1

A1A2

1.10

0.30 0.40 12.0 12.0 0.651.00

bDEee

10.4

0.25 0.35 11.9 11.90.95

e2vw

0.08

0.1

detail X

AC B

Ø v CØ w

AA2

1234568

1011121314151617

ball A1

index area

ball A1

index area

0 10 mm

scale

Product short data sheet Rev. 3 — 23 January 2015 12 of 15

NXP Semiconductors SAF360x

Digital radio and processing system-on-ch ip

9. Revision history

Table 5. Revision history

Document ID Release date Data sheet status Change notice Supersedes

SAF360X_FAM_SDS v.3 20150123 Product short data sheet - SAF360X_FAM_SDS v.2

Modifications •Updated Section 1 to Section 7.

SAF360X_FAM_SDS v.2 20140822 Product short data sheet - SAF360X_FAM_SDS v.1

Modifications •Updated data sheet with SAF3601, SAF3602, SAF3604 and SAF3606 variants

SAF360X_FAM_SDS v.1 20140716 Product short data sheet - -

Product short data sheet Rev. 3 — 23 January 2015 13 of 15

NXP Semiconductors SAF360x

Digital radio and processing system-on-ch ip

10. Legal information

10.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design.

[2] The term ‘short data sheet’ is explained in section “Definitions”.

[3] The product status of device (s) descr ibed in th is document m ay have cha nged since thi s document w as publish ed and may dif fe r in case of multiple devices. The latest product status

information is available on the Internet at URL http://www.nxp.com.

10.2 Definitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. NXP Semiconductors does not give any

representations or warranties as to the accuracy or completeness of

information included herein and shall have no liab ility for the consequences of

use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and tit le. A short data sh eet is intended

for quick reference only and shou ld not b e relied u pon to cont ain det ailed and

full information. For detailed and full information see the relevant full data

sheet, which is available on request via the local NXP Semicond uctors sales

office. In case of any inconsistency or conflict with the short dat a sheet, the

full data sheet shall pre va il.

Product specificat io n — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

NXP Semiconductors and its customer, unless NXP Semiconductors and

customer have explicitly agreed otherwise in writing. In no event however,

shall an agreement be valid in which the NXP Semiconductors product is

deemed to off er functions and qualities beyond those described in the

Product data sheet.

10.3 Disclaimers

Limited warr a nty and liability — Information in this document is believed to

be accurate and reliable. However, NXP Semiconductors does not give any

representations or warrant ies, expressed or implied, as to the accuracy or

completeness of such information and shall have no liability for the

consequences of use of such information. NXP Se miconductors takes no

responsibility for the content in this document if provided by an information

source outside of NXP Semiconductors.

In no event shall NXP Semiconductors be liable for any indirect, incidental,

punitive, special or consequ ential damages (including - wit hout limitation - lost

profits, lost savings, business interruption, costs related to the removal or

replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

Notwithstanding any damages that customer might incur for any reason

whatsoever, NXP Semico nductors’ aggregate and cumulative liability t owards

customer for the products described herein shall be limited in accordance

with the Terms and conditions of commercial sale of NXP Semiconductors.

Right to make changes — NXP Semiconductors reserves the right to make

changes to information published in this document, including without

limitation specifications and product descriptions, at any time and without

notice. This document supersedes and replaces all informa tion supplied prior

to the publication hereof .

Suitability for use in automotive applications — This NXP

Semiconductors product has been qualified for use in automotive

applications. Unless otherwise agreed in writing, the product is not designed,

authorized or warranted to be suitable for use in life support, life-critical or

safety-critical systems or equipment, nor in applications where failure or

malfunction of an NXP Semiconductors product can reasonably be expected

to result in perso nal injury, death or severe property or environme ntal

damage. NXP Semiconductors and its suppliers accept no liability for

inclusion and/or use of NXP Semiconducto rs products in such equipment or

applications and t her efo re su ch inclu si on a nd/or use is at the cu stome r's own

risk.

Applications — Applications that are described herein for an y of these

products are for illustrative purposes only. NXP Semiconductors makes no

representation or warranty that such applications will be suitable for the

specified use without further testing or modification.

Customers are responsible for the design and ope ration of their applications

and products using NXP Semiconductors product s, and NXP Semiconductors

accepts no liability for any assistance with applications or customer product

design. It is customer’s sole responsibility to determine whether the NXP

Semiconductors product is suit able and fit for t he customer’s applications and

products planned, as well as fo r the planned application and use of

customer’s third party customer(s). Custo mers should provide appropriate

design and operating safeguards to minimize the risks associa ted with their

applications and products.

NXP Semiconductors does no t accept any liability related to any default,

damage, costs or problem which is based on any weakness or default in the

customer’s applications or products, or the application or use by customer’s

third party custo mer(s). Customer is responsible for doing all necessary

testing for the customer’s applications and products using NXP

Semiconductors products in order to avoid a default of the applications and

the products or of the application or use by customer’s third party

customer(s). NXP does not accept any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those given in

the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Terms and conditions of commercial sale — NXP Semiconductors

products are sold subject to the general terms and conditions of commercial

sale, as published at http://www.nxp.com/profile/terms, unless otherwise

agreed in a valid written individua l agreement. In case an individual

agreement is concluded only the terms and conditions of the respective

agreement shall apply. NXP Semiconductors hereby expressly objects to

applying the customer’s general terms and conditions with regard to the

purchase of NXP Semiconductors products by customer.

Document status[1][2] Product status[3] Definition

Objective [short] data sheet Development This document contain s data from the objective specification for product development.

Preliminary [short] dat a sheet Qualification This document contains data from the preliminary specification.

Product [short] data sheet Production This document contains the product specification.

Product short data sheet Rev. 3 — 23 January 2015 14 of 15

NXP Semiconductors SAF360x

Digital radio and processing system-on-ch ip

No offer to sell or license — Nothing in this document may be interpret ed or

construed as an of fer to se ll product s that is op en for accept ance or the grant ,

conveyance or implication of any license under any copyrights, patents or

other industrial or intellectual property rights.

Quick reference data — The Quick reference data is an extract of the

product data given in the Limiting values and Characteristics sections of this

document, and as such is not complete, exhaustive or legally binding.

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from competent authorities.

Translations — A non-English (translated) version of a document is for

reference only. The English versio n shall prevail in case of any discrepancy

between the translated and English versions.

10.4 Licenses

10.5 Trademarks

Notice: All referenced b rands, produc t names, service names and trademarks

are the property of their respective ow ners.

I2C-bus — logo is a trademark of NXP Semi conductors N.V.

HD Radio — is a trademark of iBiquity Digital Corporation.

HD Radio — logo is a registered trademark of iBiquity Digital Corporation.

11. Contact information

For more information, please visit: http://www.nxp.com

For sales office addresses, please send an email to: salesaddresses@nxp.com

ICs with HD Radio functionality

NXP Semiconductors ICs with HD Radio functionality are manufactured

under license from iBiquity Digital Corporation. Sale or distribution of

equipment that includes this device requires a license, which may be

obtained at: iBiquity Digital Corporation, 6711 Columbia Gateway Drive,

Suite 500, Columbia MD 21046, USA. Telephone: +1 (443) 539 4290, fax:

+1 (443) 539 4291, e-mail: info@ibiquity.com.

ICs with DAB, DAB+ or T-DMB functionality

Use of this product in any mann er that complies with the DAB, DAB+ or

T -DMB digital radio standards requires a license under applicable p atents in

the DAB patent portfolio covering mainly the two technologies COFDM

radio reception and MPE G audio layer II decoding, which license must be

obtained from Koninklijke Philips Electronics N.V. via Philips Intellectual

Property and Standards (www.ip.philips.com), e-mail:

info.licensing@philips.com.

ICs with MPEG-2 AAC, MPEG-4 AAC or MPEG-4 BSAC functionality

Use of this product in any manner that complies with the MPEG-2 AAC,

MPEG-4 AAC or MPEG-4 BSAC audio compression standards requires a

license under applicable patents in the MPEG-2 AAC and MPEG-4 AAC

patent portfolio, which license is available from Via Licensing Corporation,

100 Potrero Avenue, San Francisco, CA 94103, USA..

ICs with T-DMB functionality

Use of this product in any manner that complies with the T-DMB standard,

which includes an MPE G-2 transport stream, is e xpressly prohibited without

a license under applicable patents in the MPEG-2 patent portfolio, which

license is available from MPEG-LA, L.L.C., 250 S teele Stree t, Suite 300,

Denver, Colorado 80206.

ICs with Digital Radio Mondiale (DRM) functionality

Use of this product in any manner that complies with the Digital Radio

Mondiale (DRM) digit al radio standard requires a license under applicable

patents in the Digital Radio Mondiale (DRM) patent portfolio, which license

is available from Via Licensing Corporation, 100 Potrero Avenue, San

Francisco, CA 94103, USA.

NXP Semiconductors SAF360x

Digital radio and processing system-on-ch ip

For more information, please visit: http://www.nxp.com

For sales office addresses, please send an email to: salesaddresses@nxp.com

Date of release: 23 January 2015

Documen t identifi er: SAF360X_FAM_SDS

Please be aware that important notices concerning this document and the product(s)

described herein, have been included in section ‘Legal information’.

12. Contents

1 General description. . . . . . . . . . . . . . . . . . . . . . 1

2 Features and benefits . . . . . . . . . . . . . . . . . . . . 1

2.1 HD Radio technology . . . . . . . . . . . . . . . . . . . . 1

2.2 DRM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2.3 DAB, DAB+ and T-DMB radio technology . . . . 2

2.4 Digital audio . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2.5 Other peripheral interfaces. . . . . . . . . . . . . . . . 2

2.6 Additional features . . . . . . . . . . . . . . . . . . . . . . 3

3 Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

4 Quick reference data . . . . . . . . . . . . . . . . . . . . . 3

5 Ordering information. . . . . . . . . . . . . . . . . . . . . 5

6 Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 6

7 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 9

8 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 11

9 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 12

10 Legal information. . . . . . . . . . . . . . . . . . . . . . . 13

10.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 13

10.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

10.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 13

10.4 Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

10.5 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 14

11 Contact information. . . . . . . . . . . . . . . . . . . . . 14

12 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15