SOLID TANTALUM
TD (Resin Dipped Radial) SERIES
16 NTE Electronics, Inc. D Voice (800) 631–1250 (973) 748–5089 D FAX (973) 748–6224 D http://www.nteinc.com
SOLID TANTALUM
The TD series is a range of resin dipped tantalum capacitors de-
signed for entertainment, commercial, and industrial equipment.
They have sintered anodes and solid electrolyte. The epoxy res-
in housing is flame retardent with a limiting oxygen index in ex-
cess of 30 (ASTM–D–2863).
RATINGS
Capacitance Range: 0.1µf to 680µf
Tolerance: ±20%
Voltage Range: 6.3V to 50V
PERFORMANCE SPECIFICATIONS
Operating Temperature Range:
–55°C to +85°C (–67°F to +185°F)
Capacitance Tolerance (M): ±20%
measured at +20°C (+68°F), 120HZ
Dissipation Factor: measured at +20°C (+68°F),120HZ
Capacitance Range µf0.1 – 1.5 2.2 – 6.8 10 – 68 100 – 680
≤ 0.04 ≤ 0.06 ≤ 0.08 ≤ 0.10
Surge Voltage:
DC Rated Voltage 6.3 10 16 20 25 35 50
Surge Voltage 8 13 20 26 33 46 65
MECHANICAL SPECIFICATIONS
Lead Solderability:
Meets the requirements of MIL–STD 202, Method 208
Marking:
Consists of capacitance, DC voltage, and polarity.
Recommended Cleaning Solvents:
Methanol, isopropanol ethanol, isobutanol, petroleum
ether, propanol and/or commercial detergents. Halo-
genated hydrocarbon cleaning agents such as Freon
(MF, TF, or TC), trichloroethylene, trichloroethane, or
methylchloride are not recommended as they may
damage the capacitor.
D Ø Max
L Max
d
S
10 Min2 Min
+68
+6.3V
ORDERING INFORMATION
TD 47 M 50
Series
Capacitance
Tolerance
Voltage
CAPACITANCE RANGE:
(Number denotes case size)
Rated Voltage (WV) 6.3 10 16 20 25 35 50
Surge Voltage
Cap (µf) 8 13 20 26 33 46 65
0.10 1 1
0.15 1 1
0.22 1 1
0.33 1 2
0.47 1 2
0.68 1 2
1.0 1 1 1 4
1.5 11125
2.2 1 1 2 2 3 5
3.3 1 1 2 3 3 4 7
4.7 1 2 3 4 4 5 8
6.8 2 3 4 5 5 6 8
10.0 3 4 5 6 6 7 9
15.0 4 5 6 7 7 9 10
22.0 5 6 7 8 9 10 13
33.0 6 7 8 9 10 12
47.0 7 8 10 11 12 14
68.0 8 9 11 13 13
100.0 9 11 13 13
150.0 11 13 15
220.0 12 14 15
330.0 14 15
470.0 15
680.0 15
TD Series Dimensions: mm
Diameter (D Ø) x Length (L)
Case Size Diameter
(D Ø) Length
(L) Lead Wire
(d) Spacing
(S)
1 4.50 8.50 0.50
2 4.50 9.00 0.50
3 5.00 10.00 0.50
4 5.00 10.50 0.50
±
5 5.50 10.50 0.50 2.54 ±0.51
6 6.00 11.50 0.50
7 6.50 11.50 0.50
8 7.00 12.00 0.40
9 8.00 13.00 0.50
10 8.50 14.00 0.50
11 9.00 14.00 0.50
12 9.00 14.50 0.50 5.08 ±0.51
13 9.00 16.00 0.50
14 10.00 17.00 0.50
15 10.00 18.50 0.50
(V)
