TF3
www.vishay.com Vishay Sprague
Revision: 31-Aug-11 1Document Number: 40113
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Low ESR Solid Tantalum Chip Capacitors,
TANTAMOUNT® Molded Case, Built-In-Fuse
FEATURES
• Terminations: 100 % matte tin, standard,
tin/lead available
• Molded case available in three case codes
• Compatible with “High Volume” automatic
pick and place equipment
• Mounting: Surface mount
• High ripple current carrying capability
•Low ESR
• Meets EIA 535BAAC
• 100 % surge current tested
• Compliant to RoHS Directive 2002/95/EC
• Moisture sensitivity level 1
Note
*Pb containing terminations are not RoHS compliant, exemptions
may apply
PERFORMANCE/ELECTRICAL CHARACTERISTICS
www.vishay.com/doc?40088
Operating Temperature: - 55 °C to + 85 °C
(To + 125 °C with voltage derating)
Capacitance Range: 0.47 μF to 470 μF
Capacitance Tolerance: ± 10 %, ± 20 %
Voltage Rating: 4 VDC to 50 VDC
Note
• We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
Voltage substitutions will be marked with the higher voltage rating.
ORDERING INFORMATION
TF3 E 477 M 004 E 0500
TYPE CASE CODE CAPACITANCE CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING AT + 85 °C
TERMINATION/
PACKAGING
ESR
See Ratings
and Case
Codes table
This is expressed in
picofarads. The first
two digits are the
significant figures.
The third is the
number of zeros to
follow
K = ± 10 %
M = ± 20 %
This is expressed in V.
To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point
is indicated by an “R”
(6R3 = 6.3 V)
C = Matte tin/7" (178 mm) reels
D = Matte tin/13" (330 mm)
E = Tin/lead/7" (178 mm) reels
F = Tin/lead/13" (330 mm)
Maximum
100 kHz
ESR in m
DIMENSIONS in inches [millimeters]
CASE CODE EIA SIZE L W H P TWTH (MIN.)
C 6032-28
0.236 ± 0.012
[6.0 ± 0.30]
0.126 ± 0.012
[3.2 ± 0.30]
0.098 ± 0.012
[2.5 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.087 ± 0.004
[2.2 ± 0.10]
0.039
[1.0]
D 7343-31
0.287 ± 0.012
[7.3 ± 0.30]
0.169 ± 0.012
[4.3 ± 0.30]
0.110 ± 0.012
[2.8 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.094 ± 0.004
[2.4 ± 0.10]
0.039
[1.0]
E 7343-43
0.287 ± 0.012
[7.3 ± 0.30]
0.169 ± 0.012
[4.3 ± 0.30]
0.157 ± 0.012
[4.0 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.094 ± 0.004
[2.4 ± 0.10]
0.039
[1.0]
L
TH (MIN.)
H
WTW
P
TF3
www.vishay.com Vishay Sprague
Revision: 31-Aug-11 2Document Number: 40113
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RATINGS AND CASE CODES
μF 4 V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V
0.47 C
0.68 C
1.0 C
1.5 CC
2.2 CCC/D
3.3 CCC/D
4.7 CCC/DD/E
6.8 CCCDD/E
10 C C C C/D D/E
15 C C C C/D D D/E
22 C C C/D D D/E E
33 C C/D C/D D/E E
47 C/D C/D D/E D/E
68 C C/D D/E D E
100 C C/D/E D/E E
150 C/D D/E D/E E
220 D D/E E
330 D/E E
470 E
CONSTRUCTION AND MARKING
Marking
Capacitor marking includes an anode (+) polarity band,
capacitance in microfarads and the voltage rating.
The Vishay Sprague® trademark is included if space permits.
Capacitors rated at 6.3 V are marked 6 V.
A manufacturing date code is marked on all capacitors.
Lead Frame
Epoxy Encapsulation
Anode Polarity Bar
Solderable Cathode
Termination
Silver Adhesive
MnO2/Carbon/Silver
Coating
Solderable Anode
Termination
Sintered Tantalum
Pellet
Fusible
Wire
Date Code Vishay
Sprague Logo
Indicates
Fused product
Indicates
Lead (Pb)-free
Voltage
Capacitance
μF
Polarity
Band
22F10L
XX 2
C, D, E, Cases
TF3
www.vishay.com Vishay Sprague
Revision: 31-Aug-11 3Document Number: 40113
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
4 VDC AT + 85 °C; 2.7 VDC AT + 125 °C
68 C TF3C686(1)004(2)1600 2.7 6 1.600 0.26
68 C TF3C686(1)004(2)1400 2.7 6 1.400 0.28
68 C TF3C686(1)004(2)0400 2.7 6 0.400 0.52
100 C TF3C107(1)004(2)1200 4.0 8 1.200 0.30
100 C TF3C107(1)004(2)0800 4.0 8 0.800 0.37
100 C TF3C107(1)004(2)0400 4.0 8 0.400 0.52
150 C TF3C157(1)004(2)1200 6.0 8 1.200 0.30
150 C TF3C157(1)004(2)0800 6.0 8 0.800 0.37
150 C TF3C157(1)004(2)0400 6.0 8 0.400 0.52
150 D TF3D157(1)004(2)0800 6.0 8 0.800 0.43
150 D TF3D157(1)004(2)0600 6.0 8 0.600 0.50
150 D TF3D157(1)004(2)0300 6.0 8 0.300 0.71
220 D TF3D227(1)004(2)0700 8.8 8 0.700 0.46
220 D TF3D227(1)004(2)0600 8.8 8 0.600 0.50
220 D TF3D227(1)004(2)0400 8.8 8 0.400 0.61
220 D TF3D227(1)004(2)0300 8.8 8 0.300 0.71
330 D TF3D337(1)004(2)0700 13.2 15 0.700 0.46
330 D TF3D337(1)004(2)0600 13.2 15 0.600 0.50
330 D TF3D337(1)004(2)0400 13.2 15 0.400 0.61
330 D TF3D337(1)004(2)0300 13.2 15 0.300 0.71
330 E TF3E337(1)004(2)0700 13.2 8 0.700 0.49
330 E TF3E337(1)004(2)0500 13.2 8 0.500 0.57
330 E (1) TF3E337(1)004(2)0250 13.2 8 0.250 0.81
470 E TF3E477(1)004(2)0500 18.8 8 0.500 0.57
470 E TF3E477(1)004(2)0250 18.8 8 0.250 0.81
6.3 VDC AT + 85 °C; 4 VDC AT + 125 °C
15 C TF3C156(1)6R3(2)2000 0.9 6 2.000 0.23
15 C TF3C156(1)6R3(2)1800 0.9 6 1.800 0.25
15 C TF3C156(1)6R3(2)0600 0.9 6 0.600 0.43
22 C TF3C226(1)6R3(2)2000 1.1 6 2.000 0.23
22 C TF3C226(1)6R3(2)1800 1.1 6 1.800 0.25
22 C TF3C226(1)6R3(2)0600 1.1 6 0.600 0.43
33 C TF3C336(1)6R3(2)2000 1.6 6 2.000 0.23
33 C TF3C336(1)6R3(2)1400 1.6 6 1.400 0.28
33 C TF3C336(1)6R3(2)0600 1.6 6 0.600 0.43
47 C TF3C476(1)6R3(2)1600 2.3 6 1.600 0.26
47 C TF3C476(1)6R3(2)1300 2.3 6 1.300 0.29
47 C TF3C476(1)6R3(2)0600 2.3 6 0.600 0.43
47 D TF3D476(1)6R3(2)1000 2.3 6 1.000 0.39
47 D TF3D476(1)6R3(2)0900 2.3 6 0.900 0.41
47 D TF3D476(1)6R3(2)0450 2.3 6 0.450 0.58
Notes
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(1) Preliminary values, contact factory for availability
TF3
www.vishay.com Vishay Sprague
Revision: 31-Aug-11 4Document Number: 40113
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
6.3 VDC AT + 85 °C; 4 VDC AT + 125 °C
68 C TF3C686(1)6R3(2)1200 3.3 6 1.200 0.30
68 C TF3C686(1)6R3(2)0800 3.3 6 0.800 0.37
68 C (1) TF3C686(1)6R3(2)0400 3.3 6 0.400 0.52
68 D TF3D686(1)6R3(2)1000 3.3 6 1.000 0.39
68 D TF3D686(1)6R3(2)0700 3.3 6 0.700 0.46
68 D TF3D686(1)6R3(2)0350 3.3 6 0.350 0.65
100 C TF3C107(1)6R3(2)0700 6.0 6 0.700 0.40
100 C TF3C107(1)6R3(2)0400 6.0 6 0.400 0.52
100 C (1) TF3C107(1)6R3(2)0350 6.0 6 0.350 0.56
100 D TF3D107(1)6R3(2)0800 6.0 8 0.800 0.43
100 D TF3D107(1)6R3(2)0700 6.0 8 0.700 0.46
100 D TF3D107(1)6R3(2)0400 6.0 8 0.400 0.61
100 D TF3D107(1)6R3(2)0350 6.0 8 0.350 0.65
100 E TF3E107(1)6R3(2)0900 6.0 8 0.900 0.43
100 E TF3E107(1)6R3(2)0700 6.0 8 0.700 0.49
100 E TF3E107(1)6R3(2)0300 6.0 8 0.300 0.74
150 D TF3D157(1)6R3(2)0700 9.0 8 0.700 0.46
150 D TF3D157(1)6R3(2)0600 9.0 8 0.600 0.50
150 D TF3D157(1)6R3(2)0300 9.0 8 0.300 0.71
150 E TF3E157(1)6R3(2)0600 9.0 8 0.600 0.52
150 E TF3E157(1)6R3(2)0300 9.0 8 0.300 0.74
220 D TF3D227(1)6R3(2)0700 13.2 8 0.700 0.46
220 D TF3D227(1)6R3(2)0600 13.2 8 0.600 0.50
220 D TF3D227(1)6R3(2)0300 13.2 8 0.300 0.71
220 E TF3E227(1)6R3(2)0700 13.2 8 0.700 0.49
220 E TF3E227(1)6R3(2)0500 13.2 8 0.500 0.57
220 E TF3E227(1)6R3(2)0300 13.2 8 0.300 0.74
220 E (1) TF3E227(1)6R3(2)0250 13.2 8 0.250 0.81
330 E TF3E337(1)6R3(2)0500 19.8 8 0.500 0.57
330 E TF3E337(1)6R3(2)0300 19.8 8 0.300 0.74
10 VDC AT + 85 °C; 7 VDC AT + 125 °C
10 C TF3C106(1)010(2)2000 1.0 6 2.000 0.23
10 C TF3C106(1)010(2)1800 1.0 6 1.800 0.25
10 C (1) TF3C106(1)010(2)0600 1.0 6 0.600 0.43
15 C TF3C156(1)010(2)2000 1.5 6 2.000 0.23
15 C TF3C156(1)010(2)1800 1.5 6 1.800 0.25
15 C TF3C156(1)010(2)0600 1.5 6 0.600 0.43
22 C TF3C226(1)010(2)2000 2.2 6 2.000 0.23
22 C TF3C226(1)010(2)1400 2.2 6 1.400 0.28
22 C TF3C226(1)010(2)0500 2.2 6 0.500 0.47
33 C TF3C336(1)010(2)1600 3.3 6 1.600 0.26
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Notes
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(1) Preliminary values, contact factory for availability
TF3
www.vishay.com Vishay Sprague
Revision: 31-Aug-11 5Document Number: 40113
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
10 VDC AT + 85 °C; 7 VDC AT + 125 °C
33 C TF3C336(1)010(2)1300 3.3 6 1.300 0.29
33 C TF3C336(1)010(2)0400 3.3 6 0.400 0.52
33 D TF3D336(1)010(2)1000 3.3 6 1.000 0.39
33 D TF3D336(1)010(2)0900 3.3 6 0.900 0.41
33 D TF3D336(1)010(2)0400 3.3 6 0.400 0.61
47 C TF3C476(1)010(2)1200 4.7 6 1.200 0.30
47 C TF3C476(1)010(2)1000 4.7 6 1.000 0.33
47 C (1) TF3C476(1)010(2)0400 4.7 6 0.400 0.52
47 D TF3D476(1)010(2)1000 4.7 6 1.000 0.39
47 D TF3D476(1)010(2)0700 4.7 6 0.700 0.46
47 D TF3D476(1)010(2)0400 4.7 6 0.400 0.61
47 D (1) TF3D476(1)010(2)0350 4.7 6 0.350 0.65
68 D TF3D686(1)010(2)0800 6.8 6 0.800 0.43
68 D TF3D686(1)010(2)0700 6.8 6 0.700 0.46
68 D TF3D686(1)010(2)0400 6.8 6 0.400 0.61
68 D TF3D686(1)010(2)0350 6.8 6 0.350 0.65
68 E TF3E686(1)010(2)0900 6.8 6 0.900 0.43
68 E TF3E686(1)010(2)0700 6.8 6 0.700 0.49
68 E TF3E686(1)010(2)0350 6.8 6 0.350 0.69
100 D TF3D107(1)010(2)0700 10.0 8 0.700 0.46
100 D TF3D107(1)010(2)0600 10.0 8 0.600 0.50
100 D TF3D107(1)010(2)0400 10.0 8 0.400 0.61
100 D TF3D107(1)010(2)0300 10.0 8 0.300 0.71
100 E TF3E107(1)010(2)0600 10.0 8 0.600 0.52
100 E TF3E107(1)010(2)0400 10.0 8 0.400 0.64
100 E TF3E107(1)010(2)0300 10.0 8 0.300 0.74
150 D TF3D157(1)010(2)0700 15.0 8 0.700 0.46
150 D TF3D157(1)010(2)0600 15.0 8 0.600 0.50
150 D TF3D157(1)010(2)0400 15.0 8 0.400 0.61
150 D TF3D157(1)010(2)0300 15.0 8 0.300 0.71
150 E TF3E157(1)010(2)0700 15.0 8 0.700 0.49
150 E TF3E157(1)010(2)0500 15.0 8 0.500 0.57
150 E TF3E157(1)010(2)0400 15.0 8 0.400 0.64
150 E TF3E157(1)010(2)0250 15.0 8 0.250 0.81
220 E TF3E227(1)010(2)0500 22.0 8 0.500 0.57
220 E TF3E227(1)010(2)0300 22.0 8 0.300 0.74
220 E (1) TF3E227(1)010(2)0250 22.0 8 0.250 0.81
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Notes
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(1) Preliminary values, contact factory for availability
TF3
www.vishay.com Vishay Sprague
Revision: 31-Aug-11 6Document Number: 40113
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
16 VDC AT + 85 °C; 10 VDC AT + 125 °C
6.8 C TF3C685(1)016(2)2000 1.1 6 2.000 0.23
6.8 C TF3C685(1)016(2)0600 1.1 6 0.600 0.43
10 C TF3C106(1)016(2)2000 1.6 6 2.000 0.23
10 C TF3C106(1)016(2)1800 1.6 6 1.800 0.25
10 C TF3C106(1)016(2)0700 1.6 6 0.700 0.40
10 C TF3C106(1)016(2)0600 1.6 6 0.600 0.43
15 C TF3C156(1)016(2)2000 2.4 6 2.000 0.23
15 C TF3C156(1)016(2)1400 2.4 6 1.400 0.28
15 C (1) TF3C156(1)016(2)0600 2.4 6 0.600 0.43
22 C TF3C226(1)016(2)1600 3.5 6 1.600 0.26
22 C TF3C226(1)016(2)1300 3.5 6 1.300 0.29
22 C TF3C226(1)016(2)1000 3.5 6 1.000 0.33
22 C TF3C226(1)016(2)0700 3.5 6 0.700 0.40
22 D TF3D226(1)016(2)1000 3.5 6 1.000 0.39
22 D TF3D226(1)016(2)0900 3.5 6 0.900 0.41
22 D TF3D226(1)016(2)0500 3.5 6 0.500 0.55
22 D TF3D226(1)016(2)0450 3.5 6 0.450 0.58
33 C TF3C336(1)016(2)1000 5.3 6 1.000 0.33
33 C TF3C336(1)016(2)0500 5.3 6 0.500 0.47
33 D TF3D336(1)016(2)1000 5.3 6 1.000 0.39
33 D TF3D336(1)016(2)0700 5.3 6 0.700 0.46
33 D TF3D336(1)016(2)0400 5.3 6 0.400 0.61
33 D TF3D336(1)016(2)0350 5.3 6 0.350 0.65
47 D TF3D476(1)016(2)0800 7.5 6 0.800 0.43
47 D TF3D476(1)016(2)0700 7.5 6 0.700 0.46
47 D TF3D476(1)016(2)0400 7.5 6 0.400 0.61
47 D TF3D476(1)016(2)0350 7.5 6 0.350 0.65
47 E TF3E476(1)016(2)0900 7.5 6 0.900 0.43
47 E TF3E476(1)016(2)0700 7.5 6 0.700 0.49
47 E TF3E476(1)016(2)0400 7.5 6 0.400 0.64
47 E TF3E476(1)016(2)0350 7.5 6 0.350 0.69
68 D TF3D686(1)016(2)0600 10.9 6 0.600 0.50
68 D TF3D686(1)016(2)0300 10.9 6 0.300 0.71
100 E TF3E107(1)016(2)0700 16.0 8 0.700 0.49
100 E TF3E107(1)016(2)0600 16.0 8 0.600 0.52
100 E TF3E107(1)016(2)0300 16.0 8 0.300 0.74
150 E TF3E157(1)016(2)0400 16.0 8 0.400 0.64
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Notes
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(1) Preliminary values, contact factory for availability
TF3
www.vishay.com Vishay Sprague
Revision: 31-Aug-11 7Document Number: 40113
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
20 VDC AT + 85 °C; 13 VDC AT + 125 °C
4.7 C TF3C475(1)020(2)2000 0.9 6 2.000 0.23
4.7 C TF3C475(1)020(2)1000 0.9 6 1.000 0.33
6.8 C TF3C685(1)020(2)2000 1.1 6 2.000 0.23
6.8 C TF3C685(1)020(2)1900 1.1 6 1.900 0.24
6.8 C TF3C685(1)020(2)0600 1.1 6 0.600 0.43
10 C TF3C106(1)020(2)2000 2.0 6 2.000 0.23
10 C TF3C106(1)020(2)1600 2.0 6 1.600 0.26
10 C TF3C106(1)020(2)0800 2.0 6 0.800 0.37
15 C TF3C156(1)020(2)1400 3.0 6 1.400 0.28
15 C (1) TF3C156(1)020(2)0500 3.0 6 0.500 0.47
15 D TF3D156(1)020(2)1000 3.0 6 1.000 0.39
15 D TF3D156(1)020(2)0900 3.0 6 0.900 0.41
15 D TF3D156(1)020(2)0500 3.0 6 0.500 0.55
15 D TF3D156(1)020(2)0450 3.0 6 0.450 0.58
22 D TF3D226(1)020(2)1000 4.4 6 1.000 0.39
22 D TF3D226(1)020(2)0700 4.4 6 0.700 0.46
22 D TF3D226(1)020(2)0500 4.4 6 0.500 0.55
22 D TF3D226(1)020(2)0350 4.4 6 0.350 0.65
33 D TF3D336(1)020(2)0700 6.6 6 0.700 0.46
33 D TF3D336(1)020(2)0400 6.6 6 0.400 0.61
33 D TF3D336(1)020(2)0350 6.6 6 0.350 0.65
33 E TF3E336(1)020(2)0900 6.6 6 0.900 0.43
33 E TF3E336(1)020(2)0700 6.6 6 0.700 0.49
33 E TF3E336(1)020(2)0400 6.6 6 0.400 0.64
33 E TF3E336(1)020(2)0350 6.6 6 0.350 0.69
47 D TF3D476(1)020(2)0600 9.4 6 0.600 0.50
47 D TF3D476(1)020(2)0300 9.4 6 0.300 0.71
47 E TF3E476(1)020(2)0600 9.4 6 0.600 0.52
47 E TF3E476(1)020(2)0300 9.4 6 0.300 0.74
68 E TF3E686(1)020(2)0600 13.6 6 0.600 0.52
68 E TF3E686(1)020(2)0300 13.6 6 0.300 0.74
25 VDC AT + 85 °C; 17 VDC AT + 125 °C
2.2 C TF3C225(1)025(2)3500 0.9 6 3.500 0.18
2.2 C TF3C225(1)025(2)2800 0.9 6 2.800 0.20
3.3 C TF3C335(1)025(2)2500 0.9 6 2.500 0.21
3.3 C TF3C335(1)025(2)2300 0.9 6 2.300 0.22
3.3 C TF3C335(1)025(2)2100 0.9 6 2.100 0.23
3.3 C (1) TF3C335(1)025(2)1200 0.9 6 1.200 0.30
4.7 C TF3C475(1)025(2)2500 1.2 6 2.500 0.21
4.7 C TF3C475(1)025(2)1900 1.2 6 1.900 0.24
4.7 C TF3C475(1)025(2)1300 1.2 6 1.300 0.29
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Notes
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(1) Preliminary values, contact factory for availability
TF3
www.vishay.com Vishay Sprague
Revision: 31-Aug-11 8Document Number: 40113
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
25 VDC AT + 85 °C; 17 VDC AT + 125 °C
4.7 C TF3C475(1)025(2)1000 1.2 6 1.000 0.33
6.8 C TF3C685(1)025(2)2000 1.7 6 2.000 0.23
6.8 C TF3C685(1)025(2)1600 1.7 6 1.600 0.26
6.8 C TF3C685(1)025(2)0600 1.7 6 0.600 0.43
10 C TF3C106(1)025(2)1400 2.5 6 1.400 0.28
10 C TF3C106(1)025(2)0600 2.5 6 0.600 0.43
10 D TF3D106(1)025(2)1200 2.5 6 1.200 0.35
10 D TF3D106(1)025(2)1000 2.5 6 1.000 0.39
10 D TF3D106(1)025(2)0600 2.5 6 0.600 0.50
10 D TF3D106(1)025(2)0500 2.5 6 0.500 0.55
15 D TF3D156(1)025(2)1000 3.8 6 1.000 0.39
15 D TF3D156(1)025(2)0800 3.8 6 0.800 0.43
15 D TF3D156(1)025(2)0500 3.8 6 0.500 0.55
15 D TF3D156(1)025(2)0400 3.8 6 0.400 0.61
22 D TF3D226(1)025(2)0800 5.5 6 0.800 0.43
22 D TF3D226(1)025(2)0700 5.5 6 0.700 0.46
22 D TF3D226(1)025(2)0400 5.5 6 0.400 0.61
22 D TF3D226(1)025(2)0350 5.5 6 0.350 0.65
22 E TF3E226(1)025(2)0900 5.5 6 0.900 0.43
22 E TF3E226(1)025(2)0700 5.5 6 0.700 0.49
22 E TF3E226(1)025(2)0400 5.5 6 0.400 0.64
22 E TF3E226(1)025(2)0350 5.5 6 0.350 0.69
33 E TF3E336(1)025(2)0600 8.3 6 0.600 0.52
33 E TF3E336(1)025(2)0300 8.3 6 0.300 0.74
35 VDC AT + 85 °C; 23 VDC AT + 125 °C
1.5 C TF3C155(1)035(2)4500 0.5 6 4.500 0.16
1.5 C TF3C155(1)035(2)3800 0.5 6 3.800 0.17
1.5 C TF3C155(1)035(2)2600 0.5 6 2.600 0.21
1.5 C (1) TF3C155(1)035(2)1900 0.5 6 1.900 0.24
2.2 C TF3C225(1)035(2)3500 0.8 6 3.500 0.18
2.2 C TF3C225(1)035(2)2900 0.8 6 2.900 0.19
3.3 C TF3C335(1)035(2)2500 1.2 6 2.500 0.21
3.3 C TF3C335(1)035(2)2000 1.2 6 2.000 0.23
3.3 C (1) TF3C335(1)035(2)0900 1.2 6 0.900 0.35
4.7 C TF3C475(1)035(2)1800 1.6 6 1.800 0.25
4.7 C (1) TF3C475(1)035(2)0900 1.6 6 0.900 0.35
4.7 D TF3D475(1)035(2)1500 1.6 6 1.500 0.32
4.7 D TF3D475(1)035(2)1200 1.6 6 1.200 0.35
4.7 D TF3D475(1)035(2)0700 1.6 6 0.700 0.46
4.7 D TF3D475(1)035(2)0600 1.6 6 0.600 0.50
6.8 D TF3D685(1)035(2)1300 2.4 6 1.300 0.34
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Notes
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(1) Preliminary values, contact factory for availability
TF3
www.vishay.com Vishay Sprague
Revision: 31-Aug-11 9Document Number: 40113
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
35 VDC AT + 85 °C; 23 VDC AT + 125 °C
6.8 D TF3D685(1)035(2)1000 2.4 6 1.000 0.39
6.8 D TF3D685(1)035(2)0750 2.4 6 0.750 0.45
6.8 D TF3D685(1)035(2)0500 2.4 6 0.500 0.55
10 D TF3D106(1)035(2)0800 3.5 6 0.800 0.43
10 D TF3D106(1)035(2)0500 3.5 6 0.500 0.55
10 D (1) TF3D106(1)035(2)0400 3.5 6 0.400 0.61
10 E TF3E106(1)035(2)1000 3.5 6 1.000 0.41
10 E TF3E106(1)035(2)0800 3.5 6 0.800 0.45
10 E TF3E106(1)035(2)0500 3.5 6 0.500 0.57
10 E (1) TF3E106(1)035(2)0400 3.5 6 0.400 0.64
15 D TF3D156(1)035(2)0800 5.3 6 0.800 0.43
15 D TF3D156(1)035(2)0500 5.3 6 0.500 0.55
15 D (1) TF3D156(1)035(2)0400 5.3 6 0.400 0.61
15 E TF3E156(1)035(2)0900 5.3 6 0.900 0.43
15 E TF3E156(1)035(2)0700 5.3 6 0.700 0.49
15 E TF3E156(1)035(2)0500 5.3 6 0.500 0.57
22 E TF3E226(1)035(2)0600 7.7 6 0.600 0.52
22 E (1) TF3E226(1)035(2)0300 7.7 6 0.300 0.74
50 VDC AT + 85 °C; 33 VDC AT + 125 °C
0.47 C TF3C474(1)050(2)8000 0.5 4 8.000 0.12
0.47 C TF3C474(1)050(2)6700 0.5 4 6.700 0.13
0.47 C (1) TF3C474(1)050(2)1900 0.5 4 1.900 0.24
0.68 C TF3C684(1)050(2)7000 0.5 4 7.000 0.13
0.68 C TF3C684(1)050(2)5900 0.5 4 5.900 0.14
0.68 C (1) TF3C684(1)050(2)1700 0.5 4 1.700 0.25
1.0 C TF3C105(1)050(2)5500 0.5 4 5.500 0.14
1.0 C TF3C105(1)050(2)4400 0.5 4 4.400 0.16
1.0 C TF3C105(1)050(2)2700 0.5 4 2.700 0.20
1.0 C (1) TF3C105(1)050(2)2200 0.5 4 2.200 0.22
1.5 C TF3C155(1)050(2)5000 0.8 6 5.000 0.15
1.5 C TF3C155(1)050(2)3200 0.8 6 3.200 0.19
1.5 C (1) TF3C155(1)050(2)2000 0.8 6 2.000 0.23
1.5 C (1) TF3C155(1)050(2)1600 0.8 6 1.600 0.26
2.2 C TF3C225(1)050(2)2800 1.1 6 2.800 0.20
2.2 C (1) TF3C225(1)050(2)1400 1.1 6 1.400 0.28
2.2 D TF3D225(1)050(2)2500 1.1 6 2.500 0.24
2.2 D TF3D225(1)050(2)2100 1.1 6 2.100 0.27
2.2 D TF3D225(1)050(2)0900 1.1 6 0.900 0.41
3.3 C TF3C335(1)050(2)2400 1.7 6 2.400 0.21
3.3 C TF3C335(1)050(2)1600 1.7 6 1.600 0.26
3.3 C (1) TF3C335(1)050(2)1200 1.7 6 1.200 0.30
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Notes
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(1) Preliminary values, contact factory for availability
TF3
www.vishay.com Vishay Sprague
Revision: 31-Aug-11 10 Document Number: 40113
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
50 VDC AT + 85 °C, 33 VDC AT + 125 °C
3.3 D TF3D335(1)050(2)2000 1.7 6 2.000 0.27
3.3 D TF3D335(1)050(2)1600 1.7 6 1.600 0.31
4.7 D TF3D475(1)050(2)1100 2.4 6 1.100 0.37
4.7 E TF3E475(1)050(2)1500 1.9 4 1.500 0.33
4.7 E TF3E475(1)050(2)1100 1.9 4 1.100 0.39
6.8 D TF3D685(1)050(2)0900 3.4 6 0.900 0.41
6.8 D (1) TF3D685(1)050(2)0450 3.4 6 0.450 0.58
6.8 E TF3E685(1)050(2)0900 3.4 6 0.900 0.43
6.8 E (1) TF3E685(1)050(2)0450 3.4 6 0.450 0.61
RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperatures below + 85 °C)
STANDARD CONDITIONS. FOR EXAMPLE: OUTPUT FILTERS
Capacitor Voltage Rating Operating Voltage
4.0 2.5
6.3 3.6
10 6.0
16 10
20 12
25 15
35 24
50 28
SEVERE CONDITIONS. FOR EXAMPLE: INPUT FILTERS
Capacitor Voltage Rating Operating Voltage
4.0 2.5
6.3 3.3
10 5.0
16 8.0
20 10
25 12
35 15
50 24
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Notes
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(1) Preliminary values, contact factory for availability
TF3
www.vishay.com Vishay Sprague
Revision: 31-Aug-11 11 Document Number: 40113
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CURVES AT + 25 °C, IMPEDANCE AND ESR VS. FREQUENCY
POWER DISSIPATION
CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 °C (W) IN FREE AIR
C 0.110
D 0.150
E 0.165
STANDARD PACKAGING QUANTITY
CASE CODE UNITS PER REEL
7" REEL 13" REEL
C 500 3000
D 500 2500
E 400 1500
PRODUCT INFORMATION
Guide for Molded Tantalum Capacitors
www.vishay.com/doc?40074
Pad Dimensions
Package Dimensions
Moisture Sensitivity www.vishay.com/doc?40135
SELECTOR GUIDES
Solid Tantalum Selector Guide www.vishay.com/doc?49053
Solid Tantalum Chip Capacitors www.vishay.com/doc?40091
FAQ
Frequently Asked Questions www.vishay.com/doc?40110
0.1 1.0 10.0 100.0 1000.0
ESR/Z, Ω
“E” CASE
IMPEDANCE
ESR
68 μF, 20 VDC
470 μF, 4 VDC
1.00
0.10
0.01
FREQUENCY kHz
0.1 1.0 10.0 100.0 1000.0
ESR/Z, Ω
1.00
0.10
0.01
FREQUENCY kHz
“D” CASE
IMPEDANCE
ESR
220 μF, 10 VDC
330 μF, 6.3 VDC
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
