TF3 www.vishay.com Vishay Sprague Low ESR Solid Tantalum Chip Capacitors, TANTAMOUNT(R) Molded Case, Built-In-Fuse FEATURES * Terminations: 100 % matte tin, standard, tin/lead available * Molded case available in three case codes * Compatible with "High Volume" automatic pick and place equipment * Mounting: Surface mount * High ripple current carrying capability * Low ESR * Meets EIA 535BAAC * 100 % surge current tested * Compliant to RoHS Directive 2002/95/EC * Moisture sensitivity level 1 Note * Pb containing terminations are not RoHS compliant, exemptions may apply PERFORMANCE/ELECTRICAL CHARACTERISTICS www.vishay.com/doc?40088 Capacitance Range: 0.47 F to 470 F Capacitance Tolerance: 10 %, 20 % Voltage Rating: 4 VDC to 50 VDC Operating Temperature: - 55 C to + 85 C (To + 125 C with voltage derating) ORDERING INFORMATION TF3 E 477 M 004 E 0500 TYPE CASE CODE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 C TERMINATION/ PACKAGING ESR See Ratings and Case Codes table This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow K = 10 % M = 20 % This is expressed in V. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an "R" (6R3 = 6.3 V) C = Matte tin/7" (178 mm) reels D = Matte tin/13" (330 mm) E = Tin/lead/7" (178 mm) reels F = Tin/lead/13" (330 mm) Maximum 100 kHz ESR in m Note * We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating. DIMENSIONS in inches [millimeters] L W TW H TH (MIN.) P CASE CODE EIA SIZE C 6032-28 D E Revision: 31-Aug-11 L 0.236 0.012 [6.0 0.30] W 0.126 0.012 [3.2 0.30] H 0.098 0.012 [2.5 0.30] P 0.051 0.012 [1.3 0.30] TW 0.087 0.004 [2.2 0.10] TH (MIN.) 0.039 [1.0] 7343-31 0.287 0.012 [7.3 0.30] 0.169 0.012 [4.3 0.30] 0.110 0.012 [2.8 0.30] 0.051 0.012 [1.3 0.30] 0.094 0.004 [2.4 0.10] 0.039 [1.0] 7343-43 0.287 0.012 [7.3 0.30] 0.169 0.012 [4.3 0.30] 0.157 0.012 [4.0 0.30] 0.051 0.012 [1.3 0.30] 0.094 0.004 [2.4 0.10] 0.039 [1.0] Document Number: 40113 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TF3 www.vishay.com Vishay Sprague RATINGS AND CASE CODES F 4V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V 0.47 C 0.68 C 1.0 C 1.5 2.2 C 3.3 4.7 6.8 C 10 C C C C/D C/D C C C C C/D D/E C C D D/E C C C C/D D/E 15 C C C C/D D D/E 22 C C C/D D D/E E 33 C C/D C/D D/E E 47 C/D C/D D/E D/E E 68 C C/D D/E D 100 C C/D/E D/E E 150 C/D D/E D/E E 220 D D/E E 330 D/E E 470 E CONSTRUCTION AND MARKING Indicates Fused product Silver Adhesive Capacitance F Epoxy Encapsulation Anode Polarity Bar Solderable Cathode Termination Sintered Tantalum Pellet Vishay Sprague Logo C, D, E, Cases Fusible Wire Lead Frame Revision: 31-Aug-11 Indicates Lead (Pb)-free 22F10L 2 XX Polarity Band Date Code MnO2/Carbon/Silver Coating Voltage Solderable Anode Termination Marking Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. The Vishay Sprague(R) trademark is included if space permits. Capacitors rated at 6.3 V are marked 6 V. A manufacturing date code is marked on all capacitors. Document Number: 40113 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TF3 www.vishay.com Vishay Sprague STANDARD RATINGS MAX. DC LEAKAGE AT + 25 C (A) CAPACITANCE (F) CASE CODE PART NUMBER 68 C TF3C686(1)004(2)1600 2.7 68 C TF3C686(1)004(2)1400 2.7 MAX. ESR AT + 25 C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 6 1.600 0.26 6 1.400 0.28 MAX. DF AT + 25 C 120 Hz (%) 4 VDC AT + 85 C; 2.7 VDC AT + 125 C 68 C TF3C686(1)004(2)0400 2.7 6 0.400 0.52 100 C TF3C107(1)004(2)1200 4.0 8 1.200 0.30 100 C TF3C107(1)004(2)0800 4.0 8 0.800 0.37 100 C TF3C107(1)004(2)0400 4.0 8 0.400 0.52 150 C TF3C157(1)004(2)1200 6.0 8 1.200 0.30 150 C TF3C157(1)004(2)0800 6.0 8 0.800 0.37 150 C TF3C157(1)004(2)0400 6.0 8 0.400 0.52 150 D TF3D157(1)004(2)0800 6.0 8 0.800 0.43 150 D TF3D157(1)004(2)0600 6.0 8 0.600 0.50 150 D TF3D157(1)004(2)0300 6.0 8 0.300 0.71 220 D TF3D227(1)004(2)0700 8.8 8 0.700 0.46 220 D TF3D227(1)004(2)0600 8.8 8 0.600 0.50 220 D TF3D227(1)004(2)0400 8.8 8 0.400 0.61 220 D TF3D227(1)004(2)0300 8.8 8 0.300 0.71 330 D TF3D337(1)004(2)0700 13.2 15 0.700 0.46 330 D TF3D337(1)004(2)0600 13.2 15 0.600 0.50 330 D TF3D337(1)004(2)0400 13.2 15 0.400 0.61 330 D TF3D337(1)004(2)0300 13.2 15 0.300 0.71 330 E TF3E337(1)004(2)0700 13.2 8 0.700 0.49 330 E TF3E337(1)004(2)0500 13.2 8 0.500 0.57 330 E (1) TF3E337(1)004(2)0250 13.2 8 0.250 0.81 470 E TF3E477(1)004(2)0500 18.8 8 0.500 0.57 470 E TF3E477(1)004(2)0250 18.8 8 0.250 0.81 15 C TF3C156(1)6R3(2)2000 0.9 6 2.000 0.23 15 C TF3C156(1)6R3(2)1800 0.9 6 1.800 0.25 15 C TF3C156(1)6R3(2)0600 0.9 6 0.600 0.43 22 C TF3C226(1)6R3(2)2000 1.1 6 2.000 0.23 22 C TF3C226(1)6R3(2)1800 1.1 6 1.800 0.25 22 C TF3C226(1)6R3(2)0600 1.1 6 0.600 0.43 33 C TF3C336(1)6R3(2)2000 1.6 6 2.000 0.23 33 C TF3C336(1)6R3(2)1400 1.6 6 1.400 0.28 33 C TF3C336(1)6R3(2)0600 1.6 6 0.600 0.43 47 C TF3C476(1)6R3(2)1600 2.3 6 1.600 0.26 47 C TF3C476(1)6R3(2)1300 2.3 6 1.300 0.29 47 C TF3C476(1)6R3(2)0600 2.3 6 0.600 0.43 47 D TF3D476(1)6R3(2)1000 2.3 6 1.000 0.39 47 D TF3D476(1)6R3(2)0900 2.3 6 0.900 0.41 47 D TF3D476(1)6R3(2)0450 2.3 6 0.450 0.58 6.3 VDC AT + 85 C; 4 VDC AT + 125 C Notes * Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F (1) Preliminary values, contact factory for availability Revision: 31-Aug-11 Document Number: 40113 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TF3 www.vishay.com Vishay Sprague STANDARD RATINGS MAX. DC LEAKAGE AT + 25 C (A) MAX. ESR AT + 25 C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 6 1.200 0.30 6 0.800 0.37 3.3 6 0.400 0.52 TF3D686(1)6R3(2)1000 3.3 6 1.000 0.39 TF3D686(1)6R3(2)0700 3.3 6 0.700 0.46 D TF3D686(1)6R3(2)0350 3.3 6 0.350 0.65 100 C TF3C107(1)6R3(2)0700 6.0 6 0.700 0.40 100 C TF3C107(1)6R3(2)0400 6.0 6 0.400 0.52 100 C (1) TF3C107(1)6R3(2)0350 6.0 6 0.350 0.56 100 D TF3D107(1)6R3(2)0800 6.0 8 0.800 0.43 100 D TF3D107(1)6R3(2)0700 6.0 8 0.700 0.46 100 D TF3D107(1)6R3(2)0400 6.0 8 0.400 0.61 100 D TF3D107(1)6R3(2)0350 6.0 8 0.350 0.65 100 E TF3E107(1)6R3(2)0900 6.0 8 0.900 0.43 100 E TF3E107(1)6R3(2)0700 6.0 8 0.700 0.49 CAPACITANCE (F) CASE CODE PART NUMBER 68 C TF3C686(1)6R3(2)1200 3.3 68 C TF3C686(1)6R3(2)0800 3.3 68 C (1) TF3C686(1)6R3(2)0400 68 D 68 D 68 MAX. DF AT + 25 C 120 Hz (%) 6.3 VDC AT + 85 C; 4 VDC AT + 125 C 100 E TF3E107(1)6R3(2)0300 6.0 8 0.300 0.74 150 D TF3D157(1)6R3(2)0700 9.0 8 0.700 0.46 150 D TF3D157(1)6R3(2)0600 9.0 8 0.600 0.50 150 D TF3D157(1)6R3(2)0300 9.0 8 0.300 0.71 150 E TF3E157(1)6R3(2)0600 9.0 8 0.600 0.52 150 E TF3E157(1)6R3(2)0300 9.0 8 0.300 0.74 220 D TF3D227(1)6R3(2)0700 13.2 8 0.700 0.46 220 D TF3D227(1)6R3(2)0600 13.2 8 0.600 0.50 220 D TF3D227(1)6R3(2)0300 13.2 8 0.300 0.71 220 E TF3E227(1)6R3(2)0700 13.2 8 0.700 0.49 220 E TF3E227(1)6R3(2)0500 13.2 8 0.500 0.57 220 E TF3E227(1)6R3(2)0300 13.2 8 0.300 0.74 220 E (1) TF3E227(1)6R3(2)0250 13.2 8 0.250 0.81 330 E TF3E337(1)6R3(2)0500 19.8 8 0.500 0.57 330 E TF3E337(1)6R3(2)0300 19.8 8 0.300 0.74 6 2.000 0.23 10 VDC AT + 85 C; 7 VDC AT + 125 C 10 C TF3C106(1)010(2)2000 1.0 10 C TF3C106(1)010(2)1800 1.0 6 1.800 0.25 10 C (1) TF3C106(1)010(2)0600 1.0 6 0.600 0.43 15 C TF3C156(1)010(2)2000 1.5 6 2.000 0.23 15 C TF3C156(1)010(2)1800 1.5 6 1.800 0.25 15 C TF3C156(1)010(2)0600 1.5 6 0.600 0.43 22 C TF3C226(1)010(2)2000 2.2 6 2.000 0.23 22 C TF3C226(1)010(2)1400 2.2 6 1.400 0.28 22 C TF3C226(1)010(2)0500 2.2 6 0.500 0.47 33 C TF3C336(1)010(2)1600 3.3 6 1.600 0.26 Notes * Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F (1) Preliminary values, contact factory for availability Revision: 31-Aug-11 Document Number: 40113 4 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TF3 www.vishay.com Vishay Sprague STANDARD RATINGS MAX. DC LEAKAGE AT + 25 C (A) MAX. DF AT + 25 C 120 Hz (%) MAX. ESR AT + 25 C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 1.300 0.29 CAPACITANCE (F) CASE CODE PART NUMBER 33 C TF3C336(1)010(2)1300 33 C TF3C336(1)010(2)0400 3.3 6 0.400 0.52 33 D TF3D336(1)010(2)1000 3.3 6 1.000 0.39 33 D TF3D336(1)010(2)0900 3.3 6 0.900 0.41 33 D TF3D336(1)010(2)0400 3.3 6 0.400 0.61 47 C TF3C476(1)010(2)1200 4.7 6 1.200 0.30 47 C TF3C476(1)010(2)1000 4.7 6 1.000 0.33 10 VDC AT + 85 C; 7 VDC AT + 125 C (1) 3.3 6 TF3C476(1)010(2)0400 4.7 6 0.400 0.52 47 D TF3D476(1)010(2)1000 4.7 6 1.000 0.39 47 D TF3D476(1)010(2)0700 4.7 6 0.700 0.46 47 D TF3D476(1)010(2)0400 4.7 6 0.400 0.61 47 47 C D (1) TF3D476(1)010(2)0350 4.7 6 0.350 0.65 68 D TF3D686(1)010(2)0800 6.8 6 0.800 0.43 68 D TF3D686(1)010(2)0700 6.8 6 0.700 0.46 68 D TF3D686(1)010(2)0400 6.8 6 0.400 0.61 68 D TF3D686(1)010(2)0350 6.8 6 0.350 0.65 68 E TF3E686(1)010(2)0900 6.8 6 0.900 0.43 68 E TF3E686(1)010(2)0700 6.8 6 0.700 0.49 68 E TF3E686(1)010(2)0350 6.8 6 0.350 0.69 100 D TF3D107(1)010(2)0700 10.0 8 0.700 0.46 100 D TF3D107(1)010(2)0600 10.0 8 0.600 0.50 100 D TF3D107(1)010(2)0400 10.0 8 0.400 0.61 100 D TF3D107(1)010(2)0300 10.0 8 0.300 0.71 100 E TF3E107(1)010(2)0600 10.0 8 0.600 0.52 100 E TF3E107(1)010(2)0400 10.0 8 0.400 0.64 100 E TF3E107(1)010(2)0300 10.0 8 0.300 0.74 150 D TF3D157(1)010(2)0700 15.0 8 0.700 0.46 150 D TF3D157(1)010(2)0600 15.0 8 0.600 0.50 150 D TF3D157(1)010(2)0400 15.0 8 0.400 0.61 150 D TF3D157(1)010(2)0300 15.0 8 0.300 0.71 150 E TF3E157(1)010(2)0700 15.0 8 0.700 0.49 150 E TF3E157(1)010(2)0500 15.0 8 0.500 0.57 150 E TF3E157(1)010(2)0400 15.0 8 0.400 0.64 150 E TF3E157(1)010(2)0250 15.0 8 0.250 0.81 220 E TF3E227(1)010(2)0500 22.0 8 0.500 0.57 220 E TF3E227(1)010(2)0300 22.0 8 0.300 0.74 TF3E227(1)010(2)0250 22.0 8 0.250 0.81 220 E (1) Notes * Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F (1) Preliminary values, contact factory for availability Revision: 31-Aug-11 Document Number: 40113 5 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TF3 www.vishay.com Vishay Sprague STANDARD RATINGS MAX. DC LEAKAGE AT + 25 C (A) MAX. ESR AT + 25 C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 6 2.000 0.23 1.1 6 0.600 0.43 1.6 6 2.000 0.23 TF3C106(1)016(2)1800 1.6 6 1.800 0.25 TF3C106(1)016(2)0700 1.6 6 0.700 0.40 C TF3C106(1)016(2)0600 1.6 6 0.600 0.43 C TF3C156(1)016(2)2000 2.4 6 2.000 0.23 CAPACITANCE (F) CASE CODE PART NUMBER 6.8 C TF3C685(1)016(2)2000 1.1 6.8 C TF3C685(1)016(2)0600 10 C TF3C106(1)016(2)2000 10 C 10 C 10 15 MAX. DF AT + 25 C 120 Hz (%) 16 VDC AT + 85 C; 10 VDC AT + 125 C 15 C TF3C156(1)016(2)1400 2.4 6 1.400 0.28 15 C (1) TF3C156(1)016(2)0600 2.4 6 0.600 0.43 22 C TF3C226(1)016(2)1600 3.5 6 1.600 0.26 22 C TF3C226(1)016(2)1300 3.5 6 1.300 0.29 22 C TF3C226(1)016(2)1000 3.5 6 1.000 0.33 22 C TF3C226(1)016(2)0700 3.5 6 0.700 0.40 22 D TF3D226(1)016(2)1000 3.5 6 1.000 0.39 22 D TF3D226(1)016(2)0900 3.5 6 0.900 0.41 22 D TF3D226(1)016(2)0500 3.5 6 0.500 0.55 22 D TF3D226(1)016(2)0450 3.5 6 0.450 0.58 33 C TF3C336(1)016(2)1000 5.3 6 1.000 0.33 33 C TF3C336(1)016(2)0500 5.3 6 0.500 0.47 33 D TF3D336(1)016(2)1000 5.3 6 1.000 0.39 33 D TF3D336(1)016(2)0700 5.3 6 0.700 0.46 33 D TF3D336(1)016(2)0400 5.3 6 0.400 0.61 33 D TF3D336(1)016(2)0350 5.3 6 0.350 0.65 47 D TF3D476(1)016(2)0800 7.5 6 0.800 0.43 47 D TF3D476(1)016(2)0700 7.5 6 0.700 0.46 47 D TF3D476(1)016(2)0400 7.5 6 0.400 0.61 47 D TF3D476(1)016(2)0350 7.5 6 0.350 0.65 47 E TF3E476(1)016(2)0900 7.5 6 0.900 0.43 47 E TF3E476(1)016(2)0700 7.5 6 0.700 0.49 47 E TF3E476(1)016(2)0400 7.5 6 0.400 0.64 47 E TF3E476(1)016(2)0350 7.5 6 0.350 0.69 68 D TF3D686(1)016(2)0600 10.9 6 0.600 0.50 68 D TF3D686(1)016(2)0300 10.9 6 0.300 0.71 100 E TF3E107(1)016(2)0700 16.0 8 0.700 0.49 100 E TF3E107(1)016(2)0600 16.0 8 0.600 0.52 100 E TF3E107(1)016(2)0300 16.0 8 0.300 0.74 150 E TF3E157(1)016(2)0400 16.0 8 0.400 0.64 Notes * Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F (1) Preliminary values, contact factory for availability Revision: 31-Aug-11 Document Number: 40113 6 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TF3 www.vishay.com Vishay Sprague STANDARD RATINGS MAX. DC LEAKAGE AT + 25 C (A) MAX. ESR AT + 25 C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 6 2.000 0.23 6 1.000 0.33 1.1 6 2.000 0.23 TF3C685(1)020(2)1900 1.1 6 1.900 0.24 TF3C685(1)020(2)0600 1.1 6 0.600 0.43 C TF3C106(1)020(2)2000 2.0 6 2.000 0.23 10 C TF3C106(1)020(2)1600 2.0 6 1.600 0.26 10 C TF3C106(1)020(2)0800 2.0 6 0.800 0.37 15 C TF3C156(1)020(2)1400 3.0 6 1.400 0.28 CAPACITANCE (F) CASE CODE PART NUMBER 4.7 C TF3C475(1)020(2)2000 0.9 4.7 C TF3C475(1)020(2)1000 0.9 6.8 C TF3C685(1)020(2)2000 6.8 C 6.8 C 10 MAX. DF AT + 25 C 120 Hz (%) 20 VDC AT + 85 C; 13 VDC AT + 125 C (1) TF3C156(1)020(2)0500 3.0 6 0.500 0.47 15 D TF3D156(1)020(2)1000 3.0 6 1.000 0.39 15 D TF3D156(1)020(2)0900 3.0 6 0.900 0.41 15 D TF3D156(1)020(2)0500 3.0 6 0.500 0.55 15 D TF3D156(1)020(2)0450 3.0 6 0.450 0.58 22 D TF3D226(1)020(2)1000 4.4 6 1.000 0.39 22 D TF3D226(1)020(2)0700 4.4 6 0.700 0.46 22 D TF3D226(1)020(2)0500 4.4 6 0.500 0.55 22 D TF3D226(1)020(2)0350 4.4 6 0.350 0.65 33 D TF3D336(1)020(2)0700 6.6 6 0.700 0.46 33 D TF3D336(1)020(2)0400 6.6 6 0.400 0.61 33 D TF3D336(1)020(2)0350 6.6 6 0.350 0.65 33 E TF3E336(1)020(2)0900 6.6 6 0.900 0.43 33 E TF3E336(1)020(2)0700 6.6 6 0.700 0.49 33 E TF3E336(1)020(2)0400 6.6 6 0.400 0.64 33 E TF3E336(1)020(2)0350 6.6 6 0.350 0.69 47 D TF3D476(1)020(2)0600 9.4 6 0.600 0.50 47 D TF3D476(1)020(2)0300 9.4 6 0.300 0.71 47 E TF3E476(1)020(2)0600 9.4 6 0.600 0.52 47 E TF3E476(1)020(2)0300 9.4 6 0.300 0.74 68 E TF3E686(1)020(2)0600 13.6 6 0.600 0.52 68 E TF3E686(1)020(2)0300 13.6 6 0.300 0.74 15 C 25 VDC AT + 85 C; 17 VDC AT + 125 C 2.2 C TF3C225(1)025(2)3500 0.9 6 3.500 0.18 2.2 C TF3C225(1)025(2)2800 0.9 6 2.800 0.20 3.3 C TF3C335(1)025(2)2500 0.9 6 2.500 0.21 3.3 C TF3C335(1)025(2)2300 0.9 6 2.300 0.22 3.3 C TF3C335(1)025(2)2100 0.9 6 2.100 0.23 3.3 C (1) TF3C335(1)025(2)1200 0.9 6 1.200 0.30 4.7 C TF3C475(1)025(2)2500 1.2 6 2.500 0.21 4.7 C TF3C475(1)025(2)1900 1.2 6 1.900 0.24 4.7 C TF3C475(1)025(2)1300 1.2 6 1.300 0.29 Notes * Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F (1) Preliminary values, contact factory for availability Revision: 31-Aug-11 Document Number: 40113 7 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TF3 www.vishay.com Vishay Sprague STANDARD RATINGS MAX. DC LEAKAGE AT + 25 C (A) MAX. ESR AT + 25 C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 6 1.000 0.33 6 2.000 0.23 1.7 6 1.600 0.26 TF3C685(1)025(2)0600 1.7 6 0.600 0.43 TF3C106(1)025(2)1400 2.5 6 1.400 0.28 C TF3C106(1)025(2)0600 2.5 6 0.600 0.43 10 D TF3D106(1)025(2)1200 2.5 6 1.200 0.35 10 D TF3D106(1)025(2)1000 2.5 6 1.000 0.39 10 D TF3D106(1)025(2)0600 2.5 6 0.600 0.50 10 D TF3D106(1)025(2)0500 2.5 6 0.500 0.55 15 D TF3D156(1)025(2)1000 3.8 6 1.000 0.39 15 D TF3D156(1)025(2)0800 3.8 6 0.800 0.43 15 D TF3D156(1)025(2)0500 3.8 6 0.500 0.55 15 D TF3D156(1)025(2)0400 3.8 6 0.400 0.61 22 D TF3D226(1)025(2)0800 5.5 6 0.800 0.43 22 D TF3D226(1)025(2)0700 5.5 6 0.700 0.46 22 D TF3D226(1)025(2)0400 5.5 6 0.400 0.61 22 D TF3D226(1)025(2)0350 5.5 6 0.350 0.65 22 E TF3E226(1)025(2)0900 5.5 6 0.900 0.43 22 E TF3E226(1)025(2)0700 5.5 6 0.700 0.49 22 E TF3E226(1)025(2)0400 5.5 6 0.400 0.64 22 E TF3E226(1)025(2)0350 5.5 6 0.350 0.69 33 E TF3E336(1)025(2)0600 8.3 6 0.600 0.52 33 E TF3E336(1)025(2)0300 8.3 6 0.300 0.74 CAPACITANCE (F) CASE CODE PART NUMBER 4.7 C TF3C475(1)025(2)1000 1.2 6.8 C TF3C685(1)025(2)2000 1.7 6.8 C TF3C685(1)025(2)1600 6.8 C 10 C 10 MAX. DF AT + 25 C 120 Hz (%) 25 VDC AT + 85 C; 17 VDC AT + 125 C 35 VDC AT + 85 C; 23 VDC AT + 125 C 1.5 C TF3C155(1)035(2)4500 0.5 6 4.500 0.16 1.5 C TF3C155(1)035(2)3800 0.5 6 3.800 0.17 1.5 C TF3C155(1)035(2)2600 0.5 6 2.600 0.21 1.5 C (1) TF3C155(1)035(2)1900 0.5 6 1.900 0.24 2.2 C TF3C225(1)035(2)3500 0.8 6 3.500 0.18 2.2 C TF3C225(1)035(2)2900 0.8 6 2.900 0.19 3.3 C TF3C335(1)035(2)2500 1.2 6 2.500 0.21 3.3 C TF3C335(1)035(2)2000 1.2 6 2.000 0.23 3.3 C (1) TF3C335(1)035(2)0900 1.2 6 0.900 0.35 4.7 C TF3C475(1)035(2)1800 1.6 6 1.800 0.25 4.7 C (1) TF3C475(1)035(2)0900 1.6 6 0.900 0.35 4.7 D TF3D475(1)035(2)1500 1.6 6 1.500 0.32 4.7 D TF3D475(1)035(2)1200 1.6 6 1.200 0.35 4.7 D TF3D475(1)035(2)0700 1.6 6 0.700 0.46 4.7 D TF3D475(1)035(2)0600 1.6 6 0.600 0.50 6.8 D TF3D685(1)035(2)1300 2.4 6 1.300 0.34 Notes * Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F (1) Preliminary values, contact factory for availability Revision: 31-Aug-11 Document Number: 40113 8 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TF3 www.vishay.com Vishay Sprague STANDARD RATINGS MAX. DC LEAKAGE AT + 25 C (A) MAX. ESR AT + 25 C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 6 1.000 0.39 6 0.750 0.45 2.4 6 0.500 0.55 TF3D106(1)035(2)0800 3.5 6 0.800 0.43 TF3D106(1)035(2)0500 3.5 6 0.500 0.55 D (1) TF3D106(1)035(2)0400 3.5 6 0.400 0.61 10 E TF3E106(1)035(2)1000 3.5 6 1.000 0.41 10 E TF3E106(1)035(2)0800 3.5 6 0.800 0.45 10 E TF3E106(1)035(2)0500 3.5 6 0.500 0.57 TF3E106(1)035(2)0400 3.5 6 0.400 0.64 TF3D156(1)035(2)0800 5.3 6 0.800 0.43 CAPACITANCE (F) CASE CODE PART NUMBER 6.8 D TF3D685(1)035(2)1000 2.4 6.8 D TF3D685(1)035(2)0750 2.4 6.8 D TF3D685(1)035(2)0500 10 D 10 D 10 MAX. DF AT + 25 C 120 Hz (%) 35 VDC AT + 85 C; 23 VDC AT + 125 C 10 15 E (1) D 15 D TF3D156(1)035(2)0500 5.3 6 0.500 0.55 15 D (1) TF3D156(1)035(2)0400 5.3 6 0.400 0.61 15 E TF3E156(1)035(2)0900 5.3 6 0.900 0.43 15 E TF3E156(1)035(2)0700 5.3 6 0.700 0.49 15 E TF3E156(1)035(2)0500 5.3 6 0.500 0.57 22 E TF3E226(1)035(2)0600 7.7 6 0.600 0.52 22 E (1) TF3E226(1)035(2)0300 7.7 6 0.300 0.74 50 VDC AT + 85 C; 33 VDC AT + 125 C 0.47 C TF3C474(1)050(2)8000 0.5 4 8.000 0.12 0.47 C TF3C474(1)050(2)6700 0.5 4 6.700 0.13 (1) TF3C474(1)050(2)1900 0.5 4 1.900 0.24 0.68 C TF3C684(1)050(2)7000 0.5 4 7.000 0.13 0.68 C TF3C684(1)050(2)5900 0.5 4 5.900 0.14 0.68 C (1) TF3C684(1)050(2)1700 0.5 4 1.700 0.25 1.0 C TF3C105(1)050(2)5500 0.5 4 5.500 0.14 1.0 C TF3C105(1)050(2)4400 0.5 4 4.400 0.16 1.0 C TF3C105(1)050(2)2700 0.5 4 2.700 0.20 1.0 C (1) TF3C105(1)050(2)2200 0.5 4 2.200 0.22 1.5 C TF3C155(1)050(2)5000 0.8 6 5.000 0.15 1.5 C TF3C155(1)050(2)3200 0.8 6 3.200 0.19 1.5 C (1) TF3C155(1)050(2)2000 0.8 6 2.000 0.23 1.5 C (1) TF3C155(1)050(2)1600 0.8 6 1.600 0.26 2.2 C TF3C225(1)050(2)2800 1.1 6 2.800 0.20 2.2 C (1) TF3C225(1)050(2)1400 1.1 6 1.400 0.28 2.2 D TF3D225(1)050(2)2500 1.1 6 2.500 0.24 2.2 D TF3D225(1)050(2)2100 1.1 6 2.100 0.27 2.2 D TF3D225(1)050(2)0900 1.1 6 0.900 0.41 3.3 C TF3C335(1)050(2)2400 1.7 6 2.400 0.21 3.3 C TF3C335(1)050(2)1600 1.7 6 1.600 0.26 3.3 C (1) TF3C335(1)050(2)1200 1.7 6 1.200 0.30 0.47 C Notes * Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F (1) Preliminary values, contact factory for availability Revision: 31-Aug-11 Document Number: 40113 9 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TF3 www.vishay.com Vishay Sprague STANDARD RATINGS MAX. DC LEAKAGE AT + 25 C (A) MAX. ESR AT + 25 C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 6 2.000 0.27 6 1.600 0.31 2.4 6 1.100 0.37 TF3E475(1)050(2)1500 1.9 4 1.500 0.33 TF3E475(1)050(2)1100 1.9 4 1.100 0.39 CAPACITANCE (F) CASE CODE PART NUMBER 3.3 D TF3D335(1)050(2)2000 1.7 3.3 D TF3D335(1)050(2)1600 1.7 4.7 D TF3D475(1)050(2)1100 4.7 E 4.7 E MAX. DF AT + 25 C 120 Hz (%) 50 VDC AT + 85 C, 33 VDC AT + 125 C 6.8 D TF3D685(1)050(2)0900 3.4 6 0.900 0.41 6.8 D (1) TF3D685(1)050(2)0450 3.4 6 0.450 0.58 6.8 E TF3E685(1)050(2)0900 3.4 6 0.900 0.43 6.8 E (1) TF3E685(1)050(2)0450 3.4 6 0.450 0.61 Notes * Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F (1) Preliminary values, contact factory for availability RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperatures below + 85 C) STANDARD CONDITIONS. FOR EXAMPLE: OUTPUT FILTERS Capacitor Voltage Rating Operating Voltage 4.0 2.5 6.3 3.6 10 6.0 16 10 20 12 25 15 35 24 50 28 SEVERE CONDITIONS. FOR EXAMPLE: INPUT FILTERS Revision: 31-Aug-11 Capacitor Voltage Rating Operating Voltage 4.0 2.5 6.3 3.3 10 5.0 16 8.0 20 10 25 12 35 15 50 24 Document Number: 40113 10 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TF3 www.vishay.com Vishay Sprague TYPICAL CURVES AT + 25 C, IMPEDANCE AND ESR VS. FREQUENCY "E" CASE "D" CASE 1.00 1.00 68 F, 20 VDC 0.10 IMPEDANCE ESR ESR/Z, ESR/Z, IMPEDANCE ESR 0.10 220 F, 10 VDC 330 F, 6.3 VDC 470 F, 4 VDC 0.01 0.01 0.1 1.0 10.0 100.0 0.1 1000.0 1.0 10.0 100.0 1000.0 FREQUENCY kHz FREQUENCY kHz POWER DISSIPATION CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 C (W) IN FREE AIR C 0.110 D 0.150 E 0.165 STANDARD PACKAGING QUANTITY CASE CODE UNITS PER REEL 7" REEL 13" REEL C 500 3000 D 500 2500 E 400 1500 PRODUCT INFORMATION Guide for Molded Tantalum Capacitors Pad Dimensions www.vishay.com/doc?40074 Package Dimensions Moisture Sensitivity www.vishay.com/doc?40135 SELECTOR GUIDES Solid Tantalum Selector Guide www.vishay.com/doc?49053 Solid Tantalum Chip Capacitors www.vishay.com/doc?40091 FAQ Frequently Asked Questions Revision: 31-Aug-11 www.vishay.com/doc?40110 Document Number: 40113 11 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000