DC-DC 6 Watts xppower.com JTE Series * 4:1 Input Range * DIP-24 Plastic Case * Operating Temperature -40 C to +100 C * Single & Dual Outputs * Optional Metal Case * 1500 VDC Isolation, 3000 VDC Option * 3 Year Warranty Specification Input General * 24 V (9-36 VDC) 48 V (18-75 VDC) Input Current * See table Input Filter * Pi network Input Reflected Ripple * 20 mA pk-pk through 12 H inductor and 4.7 F capacitor Input Surge * 24 V models 50 VDC for 100 ms 48 V models 100 VDC for 100 ms Under Voltage Lockout * 24 V models on >8.5 V, off <8.0 V 48 V models on >16.5 V, off <15.5 V Input Voltage Range Isolation Capacitance * See table * 1500 VDC Input to Output, for optional high isolation version 3000 VDC input to output add suffix `-H' to model number 1000 VDC Input to Case 1000 VDC Output to Case * 1000 pF typical input to output Isolation Resistance Switching Frequency Power Density MTBF * * * * Efficiency Isolation Voltage Output Output Voltage Output Voltage Balance Initial Set Accuracy Minimum Load Line Regulation Load Regulation * * * * * * Cross Regulation * Start Up Delay Ripple & Noise * * Transient Response * Overload Protection * Short Circuit Protection * Maximum Capacitive Load Temperature Coefficient * See table 2% max, dual output models 2% max No minimum load required 0.5% max 1.2% max for single output and 5% max for dual output from 10-100% 5% max on dual output models (see note 4) 20 ms typical 80 mV pk-pk (100 mV for D24 models), 20 MHz bandwidth (see note 5) <3% max deviation, recovery to within 1% in 300 s for a 25% load change (4% max. deviation for S3V3 models) 135% - 185% of Full Load Trip & restart (Hiccup mode), auto recovery See table * 0.02/C max 109 330 kHz typical 15 W/in3 >800 kHrs to MIL-HDBK-217F at 25 C, GB Environmental Operating Temperature * -40 C to +100 C, derate from 100% load at +60 C to no load at +100 C Case Temperature * +100 C max Storage Temperature * -55 C to +125 C Cooling * Natural convection Operating Humidity * Up to 95%, non-condensing EMC Emissions ESD Immunity Radiated immunity EFT/Burst Surge Conducted Immunity Magnetic Fields * EN55022 class A conducted * EN61000-4-2, Level 3 8 kV air discharge Perf Criteria B, 6 kV contact discharge Perf Criteria B * EN61000-4-3, 10 V/m, Perf Criteria A * EN61000-4-4, level 3, Perf Criteria A* * EN61000-4-5, level 2, Perf Criteria A* * EN61000-4-6, 10 Vrms, Perf Criteria A * EN61000-4-8, 1 A/m, Perf Criteria A Safety Safety Approvals * UL60950-1, CAN/CSA C22.2 No.60950-1 * External input capacitor required, 220F/100V Input Voltage Output Voltage 3.3 V 5.0 V 12.0 V 15.0 V 24.0 V 3.3 V 5.0 V 12.0 V 15.0 V 24.0 V 3.3 V 5.0 V 12.0 V 15.0 V 24.0 V 3.3 V 5.0 V 12.0 V 15.0 V 24.0 V 9-36 V 18-75 V 1400 1200 500 400 250 909 600 250 200 125 1400 1200 500 400 250 909 600 250 200 125 Maximum Capacitive Load(3) Input Current(2) No Load Full Load Output Current mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA 10 mA 10 mA 10 mA 10 mA 10 mA 10 mA 10 mA 10 mA 15 mA 20 mA 7 mA 7 mA 7 mA 7 mA 7 mA 7 mA 7 mA 7 mA 7 mA 10 mA 257 mA 316 mA 301 mA 301 mA 301 mA 324 mA 308 mA 301 mA 301 mA 308 mA 128 mA 154 mA 151 mA 151 mA 151 mA 162 mA 154 mA 151 mA 151 mA 158 mA 470 470 100 100 47 220 220 100 100 47 470 470 100 100 47 220 220 100 100 47 Notes 1. For optional 3000 VDC isolation add suffix `-H' to model number. 2. Input current measured at nominal input voltage. 3. Maximum capacitive load is per output. 4. Cross regulation for duals is 5% when one output is at 100% and the other is varied between 25% and 100%. 9 F F F F F F F F F F F F F F F F F F F F Efficiency Model Number(1,6) 76% 80% 84% 84% 84% 78% 82% 84% 84% 82% 76% 82% 84% 84% 84% 78% 82% 84% 84% 80% JTE0624S3V3 JTE0624S05 JTE0624S12 JTE0624S15 JTE0624S24 JTE0624D03 JTE0624D05 JTE0624D12 JTE0624D15 JTE0624D24 JTE0648S3V3 JTE0648S05 JTE0648S12 JTE0648S15 JTE0648S24 JTE0648D03 JTE0648D05 JTE0648D12 JTE0648D15 JTE0648D24 P 1 5. Ripple & Noise measured with 1F ceramic capacitor across output pins. 6. For optional metal case version, add suffix `-M' to part number e.g. B JTE0624S12-M. 2 Mechanical Details Plastic Case Optional Metal Case 1.25 (31.75) DIA 0.02 (0.50) 1.25 (31.75) Printed Face 2 0.40 (10.40) 0.80 (20.32) 0.80 (20.32) 9 2 3 11 0.60 (15.24) Bottom View 23 22 16 14 0.02 (0.50) 0.20 (5.08) Pin 2 3 9 11 14 16 22 23 Single -Vin -Vin No Pin N.C. +Vout -Vout +Vin +Vin Dual -Vin -Vin Common -Vout +Vout Common +Vin +Vin Notes 9 22 16 0.10 (2.54) Printed Face 0.90 (22.86) 3 11 0.60 (15.24) Bottom View 23 0.12 (3.05) 0.02 (0.50) 0.90 (22.86) 14 0.20 (5.08) 0.40 (10.40) 0.12 (3.05) Min. 4. Pin pitch tolerance: 0.014 (0.35) 5. Case tolerance: 0.02 (0.5) 1. All dimensions are in inches (mm) 2. Weight: 0.04 lbs (17 g) approx. 3. Pin diameter: 0.02 0.002 (0.5 0.005) Application Note 100 80 Load (%) Derating Curve 60 40 20 0 -40 -20 0 10 20 30 40 50 60 Ambient Temperature (C) 70 80 90 100 27 Nov 17 DC-DC JTE06 Models and Ratings