SIL30C Series 12 Vin single output DC-DC CONVERTERS * * * * * * * * * C Class Non-isolated 1 NEW Product 30 A current rating Input voltage range: 10.2 Vdc to 13.8 Vdc Output voltage range: 0.9 Vdc to 5.0 Vdc Industry leading value * Cost optimized design Excellent transient response Output Voltage adjustability * Pathway for future upgrades * Supports silicon voltage migration * Resulting in reduced design-in and qualification time Designed in reliability: MTBF of > 3.9 million hours per Telcordia SR-332 Current Share Available RoHS compliant The SIL30C Series is a new high density open-frame non-isolated converter for space sensitive applications. The converter has a wide input range (10.2 Vdc to 13.8 Vdc) and offers a wide 0.9 Vdc to 5 Vdc output voltage range with a 30 A load. The series offers remote ON/OFF, overtemperature protection and overcurrent protection as standard. Its current share facility supports parallel operation of multiple SIL30C units and the remote sense feature enables the SIL30C compensate for voltage drops between the converters output and the load. With full international safety approvals including EN60950 and UL/cUL60950 the SIL30C reduces compliance costs and time to market. 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25 C unless otherwise stated OUTPUT SPECIFICATIONS Voltage adjustability INPUT SPECIFICATIONS (CONTD.) (See Note 1) 0.9-5.0 Vdc Output setpoint accuracy Using 1.0% trim resistors 3% Turn ON threshold Turn OFF threshold 9.0 Vdc 7.6 Vdc Line regulation Low line to high line 0.2% max. GENERAL SPECIFICATIONS Load regulation Full load to min. load 1.5% max. Efficiency Min/max load 0 A/30 A Overshoot At turn-on 1.0% max. Undershoot At turn-off 100 mV max. Ripple and noise 5 Hz to 20 MHz (See Note 2) 50 mV pk-pk 15 mV rms Transient response (See Note 3) Deviation Current share Full load 75 mV 150 s recovery to within regulation band 10% 91% Switching frequency Fixed Approvals and standards (See Note 7) Nominal 12 V Input current No load Remote OFF 230 mA 30 mA Input current (max.) (See Note 4) 13.8 A max. @ Io max. and Vin = 10.8 V Input reflected ripple (See Note 2) 150 mA (pk-pk) Remote ON/OFF Logic compatibility ON OFF Start-up time (See Note 5) 10.2-13.8 Vdc Logic high >2.4 Vdc <0.8 Vdc Power up Remote ON/OFF <30 ms <30 ms TUV Product Services IEC60950, UL/cUL60950 Material flammability UL94V-0 Weight 28.3 g (1 oz) MTBF Telcordia SR-332 4,456,655 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 8) INPUT SPECIFICATIONS Input voltage range 300 kHz typ. Operating ambient, temperature Non-operating 0 C to +80 C -40 C to +125 C PROTECTION Short-circuit Overtemperature Foldback, non-latching Hiccup, non-latching RECOMMENDED SYSTEM CAPACITANCE Input capacitance Output capacitance (See Note 9) 270 F/20 m esr max. (See Note 9) 2 x 680 F/10 m esr max. International Safety Standard Approvals UL/cUL CAN/CSA 22.2 No. E139421 UL60950 file No. E139421 TUV Product Service (EN60950) Certificate No. B04 08 19870 228 CB report and certificate to US/6415C/UL File Name: SIL30C.PDF Rev (04): 16 Dec 2005 SIL30C Series 12 Vin single output DC-DC CONVERTERS C Class Non-isolated 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT POWER (MAX.) INPUT VOLTAGE OVP 150 W 10.2-13.8 Vdc N/A NEW Product OUTPUT VOLTAGE (11) OUTPUT CURRENT (MIN.) OUTPUT CURRENT (MAX.) EFFICIENCY (TYP.) LINE LOAD MODEL NUMBER (10,12,13,14) 0.9-5 V 0A 30 A 91% 0.2% 1.5% SIL30C-12SADJ-VJ REGULATION Part Number System with Options SIL30C-12SADJ-VJ Packaging Options (13) J = Pb-free (RoHS 6/6 compliant) Product Family SIL = Single in Line Mounting Option V = Vertical Mount H = Horizontal Mount Rated Output Current 30 = 30 Amps Performance C = Cost Optimised Number of Outputs SADJ = Single Adjustable Output Input Voltage 12 = 10.2 Vdc to 13.8 Vdc Output Voltage Adjustment of the SIL30C-12SADJ Series The ultra-wide output voltage trim range offers major advantages to users who select the SIL30C-12SADJ. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SIL30C-12SADJ converter leaves the factory the output has been adjusted to the default voltage of 0.9 V Notes 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Uses external resistor from TRIM to output ground. See Application Note 132 for details. Measured with external filter. See Application Note 132 for details. di/dt = 10 A/s, Vin = Nom, Tc = 25 C, load change = 0.5 lo max to 0.75 lo max and 0.75 lo max to 0.5 lo max. External input fusing is recommended. Power up is the time from application of dc input to POWER GOOD high. Remote ON/OFF asserted high to POWER GOOD high. Signal line assumed <3 m. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. See Application Note 132 for operation above 50 C. See Application Note 132 for ripple current requirements. The standard unit with the suffix '-V' is for vertical mounting. To order a unit with horizontal mounting, please add the suffix '-H' to the model number, e.g. SIL30C-12SADJ-HJ. This model has a wide trim output of between 0.9 Vdc to 5 Vdc. An external resistor adjusts the output voltage. To order a unit with a pin length of 0.150", please add suffix `P4' to the model number, e.g. SIL30C-12SADJ-HP4J. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. PIN CONNECTIONS PIN NO. FUNCTION PIN NO. FUNCTION 1 TRIM 13 Vin 2 No Pin 14 Vin 3 Ground 15 Vout 4 Power Good 16 Vout 5 Not Connected 17 Ground 6 Current Share 18 Vout 7 Ground 19 Ground 8 Ground 20 Vout 9 Remote ON/OFF 21 Ground 10 Remote sense (GND) 22 Vout 11 Remote sense (O/P) 23 Ground 12 Vin 24 Vout File Name: SIL30C.PDF Rev (04): 16 Dec 2005 SIL30C Series 12 Vin single output DC-DC CONVERTERS C Class Non-isolated 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm 0.150 (3.82) NEW Product 0.470 (11.94) 0.050 (1.27) 1.240 (31.40) 1.350 (34.36) 1.250 (31.75 0.050 (1.27) Ref. 0.120 (3.05) 1.200 (30.48) 0.150 (3.81) Ref. 0.100 (2.54) Typ. 0.290 (7.46) 0.212 (5.38) 2.300 (58.42) 0.090 (2.29) 0.120 (3.05) 2.400 (60.96) All dimensions in inches (mm) General tolerance 0.015in (0.30mm) except where specified otherwise Figure 1: Mechanical Drawing - Horizontal Mount Version 0.52 0.02 (13.20 0.5) 0.050 (1.27) 0.025 0.001 (0.64) Typ 0.025 0.062 (1.57) Ref 0.140 (3.56 Typ) 1.250 (31.75) 0.09 0.02 (2.4 0.5) 0.140 (3.56) 2.400 (60.96) 0.090 (2.29) Pin 1 0.100 (2.54) Typ 2.300 (58.42) 0.250 (6.35) 0.050 (1.27) Typ 0.025 0.001 (0.64) Typ. 0.025 0.019 (0.48) Ref 1.200 (30.48) 0.26 0.03 (6.591 0.76) All dimensions in inches (mm) General tolerance 0.015in (0.30mm) except where specified otherwise Figure 2: Mechanical Drawing - Vertical Mount Version Datasheet (c) Artesyn Technologies(R) 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note Longform Datasheet www.artesyn.com File Name: SIL30C.PDF Rev (04): 16 Dec 2005