AFT09MS007NT1
27
RF Device Data
Freescale Semiconductor, Inc.
PRODUCT DOCUMENTATION, SOFTWARE AND TOOLS
Refer to the following documents, software and tools to aid your design process.
Application Notes
AN1955: Thermal Measurement Methodology of RF Power Amplifiers
Engineering Bulletins
EB212: Using Data Sheet Impedances for RF LDMOS Devices
Software
Electromigration MTTF Calculator
RF High Power Model
.s2p File
Development Tools
Printed Circuit Boards
For Software and Tools, do a Part Number search at http://www.freescale.com, and select the “Part Number” link. Go to the
Software & Tools tab on the part’s Product Summary page to download the respective tool.
REVISION HISTORY
The following table summarizes revisions to this document.
Revision Date Description
0June 2013 Initial Release of Data Sheet
1Apr. 2014 Wideband Performance tables 8, 12, 16: updated to include Pin for all reference circuits, pp. 1, 8, 13, 18
Tape and Reel information: corrected tape width information from 13--inch reel to 7--inch reel to reflect
actual reel size, p. 1
Maximum Ratings table: changed Total Device Dissipation value from 182 to 114 W to reflect performance
at 150C, p. 2
Fig. 4, MTTF versus Junction Temperature – CW: MTTF end temperature on graph changed to match
maximum operating junction temperature, p. 4
Table 6, Test Circuit Component Designations and Values: updated PCB description to reflect most current
board specifications from Rogers, p. 5
Added 350–470 MHz UHF Broadband Reference Circuit as follows:
-- Wideband Performance table, p. 1
-- Table 8, UHF Broadband Performance, p. 8
-- Table 9, Load Mismatch/Ruggedness, p. 8
-- Fig. 10, UHF Broadband Reference Circuit Component Layout, p. 9
-- Table 10, UHF Broadband Reference Circuit Component Designations and Values, p. 9
-- Fig. 11, UHF Broadband Reference Circuit Schematic, p. 10
-- Table 11, UHF Broadband Reference Circuit Microstrips, p. 10
-- Fig. 12, Power Gain, Drain Efficiency and Output Power versus Frequency at a Constant Input
Power, p. 11
-- Fig. 13, Output Power versus Gate--Source Voltage, p. 11
-- Fig. 14, Power Gain, Drain Efficiency and Output Power versus Input Power and Frequency, p. 11
-- Fig. 15, VHF Broadband Series Equivalent Source and Load Impedance, p. 12
Table 12. Load Mismatch/Ruggedness table: changed Test Voltage from 9.0 to 10.8 Vdc to reflect true
capability of the circuit, p. 13