RMCF Series Stackpole Electronics, Inc. General Purpose Thick Film Chip Resistor Features: * * * * Resistive Product Solutions Nickel Barrier terminations standard Power derating from 100% at 70C to zero at +155C Zero ohm available (max resistance 0.05) RoHS compliant Electrical Specifications Type / Code Package Type Power Rating (Watts) @ 70C Maximum Working Voltage (1) Maximum Overload Voltage Maximum Current RMCF 1/20 0201 0.05W 25V 50V 1 Amp RMCF 1/16S 0402 0.063W 50V 100V 1 Amp RMCF 1/16 0603 0.1W 50V 100V 1 Amp RMCF 1/10 0805 0.125W 150V 300V 2 Amp RMCF 1/8 1206 0.25W 200V 400V 2 Amp RMCF 1/4 1210 0.33W(3) 200V 400V 3 Amp RMCF 1/2 2010 0.75W(3) 200V 400V 3 Amp RMCF 1 2512 1W 200V 400V 3 Amp (1) Lesser of PR or maximum working voltage. (2) Contact factory for extended ohmic values. Rev Date: 01/28/2011 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 1 Resistance Temperature Coefficient 400 ppm/C 200 ppm/C 300 ppm/C 200 ppm/C 100 ppm/C 200 ppm/C 600 ppm/C 200 ppm/C 100 ppm/C 200 ppm/C 200 ppm/C 100 ppm/C 200 ppm/C 200 ppm/C 100 ppm/C 200 ppm/C 200 ppm/C 400 ppm/C 200 ppm/C 100 ppm/C 200 ppm/C 400 ppm/C 200 ppm/C 100 ppm/C 200 ppm/C 400 ppm/C 200 ppm/C 100 ppm/C Ohmic Range () and Tolerance (2) 1% 5% 1 ~ 9.76 10 ~ 10M 0.2 ~ 0.590 0.604 ~ 9.76 10.0 ~ 1M 1.02M ~ 10M 0.1 ~ 0.976 1 ~ 9.76 10 ~ 1M 1.02M ~ 10M 0.1 ~ 9.76 10 ~ 1M 1.02M ~ 10M 0.1 ~ 9.76 10 ~ 1M 1.02M ~ 10M 0.1 ~ 0.976 1 ~ 9.76 10 ~ 10M 0.1 ~ 0.976 1 ~ 9.76 10 ~ 10M 0.1 ~ 0.976 1 ~ 9.76 10 ~ 10M 1 ~ 9.1 10 ~ 10M 0.2 ~ 0.56 0.62 ~ 9.1 10.0 ~ 1M 1.1M ~ 20M 0.1 ~ 0.91 1 ~ 20M 0.1 ~ 20M 0.1 ~ 20M 0.1 ~ 0.91 1 ~ 9.1 10 ~ 20M 0.1 ~ 0.91 1 ~ 9.1 10 ~ 10M 0.1 ~ 0.91 1 ~ 9.1 10 ~ 10M - (3) Power rating is 0.500W for ohmic values below 1 www.seielect.com marketing@seielect.com RMCF Series Stackpole Electronics, Inc. General Purpose Thick Film Chip Resistor Resistive Product Solutions Mechanical Specifications Type / Code L Body Length W Body Width H Body Height a Top Termination b Bottom Termination Units RMCF 1/20 0.024 0.001 0.60 0.03 0.011 0.001 0.30 0.03 0.010 0.002 0.25 0.05 0.006 0.002 0.15 0.05 0.006 0.002 0.15 0.05 inches mm RMCF 1/16S 0.039 0.004 1.00 0.10 0.020 0.002 0.50 0.05 0.011 0.004 0.30 0.10 0.008 0.004 0.20 0.10 0.010 0.004 0.25 0.10 inches mm RMCF 1/16 0.061 0.006 1.55 0.15 0.031 + 0.006 / - 0.004 0.80 + 0.15 / -0.10 0.018 0.004 0.45 0.10 0.012 0.008 0.30 0.20 0.012 0.008 0.30 0.20 inches mm RMCF 1/10 0.079 0.008 2.00 0.20 0.049 0.004 1.25 0.10 0.020 0.006 0.50 0.15 0.014 0.010 0.35 0.25 0.014 0.010 0.35 0.25 inches mm RMCF 1/8 0.126 0.010 3.20 0.25 0.063 0.006 1.60 0.15 0.021 0.006 0.55 0.15 0.020 0.012 0.50 0.30 0.020 0.012 0.50 0.30 inches mm RMCF 1/4 0.126 0.010 3.20 0.25 0.098 0.008 2.50 0.20 0.021 0.006 0.55 0.15 0.020 0.012 0.50 0.30 0.020 0.012 0.50 0.30 inches mm RMCF 1/2 0.197 0.008 5.00 0.20 0.098 0.008 2.5 0.20 0.021 0.006 0.55 0.15 0.024 0.012 0.60 0.30 0.024 0.014 0.60 0.35 inches mm RMCF 1 0.248 0.008 6.30 0.20 0.126 0.008 3.20 0.20 0.021 0.006 0.55 0.15 0.024 0.012 0.60 0.30 0.024 0.014 0.60 0.35 inches mm Performance Characteristics Test Test Conditions (JIS C 5202) Test Results Short Time Overload 2.5x rated voltage for 5 seconds (2% + 0.1) Dielectric Withstanding Voltage 100 VAC, 1 minute (1% + 0.05) Resistance to Soldering Heat 260C 5C, for 10 sec. 0.5 sec. (Solder Bath) 1% Solderability 235C 5C, for 2 sec. 0.5 sec. (Colophonium flux) 95% coverage, minimum Temperature Cycle -65C: 30 min. 25C: 2 to 3 min. 155C: 30 min. 25C: 2 to 3 min. (1% + 0.05) Jumper (<0.05) (5 Cycles) Endurance (Damp load) 40C 2C, 90% RH, Rated Load 90 min. On, 30 min. Off for 1,000 hrs. -0hrs./+48hrs. (3% + 0.1) Jumper (<0.05) Endurance (Rated load) 70C 2C, Rated Load 90 min. On, 30 min. Off for 1,000 hrs. -0hrs./+48hrs. (3% + 0.1) Jumper (<0.05) Voltage Coefficient 1/10 rated voltage for 3 sec. max. then rated voltage for 3 sec. max. 100 (ppm/V) Robustness of Termination Bend of 3mm for 5 1 sec. (1% + 0.05 Ohm) Operating Temperature Range: -55C to +125C (0201 size) -55C to +155C (all others) Rev Date: 01/28/2011 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 2 www.seielect.com marketing@seielect.com RMCF Series Stackpole Electronics, Inc. General Purpose Thick Film Chip Resistor Resistive Product Solutions How to Order SEI Type Code Nominal Resistance RMC 1/16 4.7K Type RMC RMCF Description Standard RoHS Code Wattage Size 1/20 0.05W 0201 1/16S 0.063W 0402 1/16 0.1W 0603 1/10 0.125W 0805 1/8 0.25W 1206 1/4 0.33W 1210 1/2 0.75W 2010 1 1W 2512 Tolerance Packaging 5% R Tolerance 1% 5% Values E96,E24 E24 SEI Types 1/20 1/16S Pkg Qty 15,000 10,000 10,000 5,000 1,000 4,000 1/16, 1/10, 1/8 1/4, 1/2, 1 Description Code 7" reel - paper tape R 10" reel - paper tape 7" reel - paper tape bulk 7" reel - plastic tape G R A R New part number format starting January 3rd, 2011: How to Order 1 2 3 4 5 6 7 8 9 10 11 12 13 14 R M C F 0 6 0 3 J T 4 K 7 0 Product Series Thick Film Chip Resistors RMCF Size 0201 0402 0603 0805 1206 1210 2010 2512 Power 0.05W 0.063W 0.1W 0.125W 0.25W 0.33W 0.75W 1W Tolerance Tol Code 1% F 5% J jumper Z Rev Date: 01/28/2011 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. Packaging Description Code T G B 7" reel - paper tape 7" reel - plastic tape 10" reel - paper tape bulk 3 Size Quantity 0201 15,000 0402 10,000 0603, 0805, 1206 5,000 1210, 2010, 2512 4,000 0603, 0805, 1206 10,000 0603, 0805, 1206 1,000 Resistance Value Four characters with the multiplier used as the decimal holder. 0.1 ohm = R100 4.70 ohm = 4R70 10.0 Kohm = 10K0 1 Mohm = 1M00 Zero ohm jumper = 0R00 www.seielect.com marketing@seielect.com