F-219 (Rev 20NOV20) TM MICRO S1SD-10-28-GF-03.00-L1 (1.00 mm) .03937" S1SD, S1SDT SERIES S1SDT-05-28-GF-03.00-L1 MICRO DOUBLE ROW CABLE SOCKET Board Mates: T1M Cable Mates: T1SD, T1PD, T1SDT, T1PDT SPECIFICATIONS For complete specifications see www.samtec.com?S1SD or www.samtec.com?S1SDT Insulator Material: Natural Nylon Contact Material: Phosphor Bronze Plating: Au over 50 " (1.27 m) Ni Operating Temp Range (S1SD(T)/T1M): -10 C to +85 C (PVC) -40 C to +125 C (Teflon(R) cable with -GF plated contact) Current Rating (28 AWG): 2.3 A per pin (2 pins powered) Voltage Rating: 250 VAC/353 VDC Wire: 28 or 30 AWG RoHS Compliant: Yes 28 AWG or 30 AWG Choice of single or double ended Plastic latch (1.00 mm) .0394" pitch *DuPontTM Teflon(R) is a registered trademark of the E.I. du Pont de Nemours and Company or its affiliates. TYPE STRIP POSITIONS PER ROW WIRE GAUGE PLATING OPTION ASSEMBLED LENGTH -28 -GF -"XX.XX" WIRING OPTION RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality S1SD = Double Row PVC Cable FILE NO. E111594 S1SDT COMPONENTS -02, -03 -04, -05, -10, -15, -20 = 28 AWG -30 = 30 AWG (Standard sizes) = 3 " (0.07 m) Gold on contact and tail = Assembled Length in Inches (45.72 mm) 01.80" min. Double Ended Assemblies -L1 = Pin 1 to Pin 1 -L2 = Double Row *Teflon(R) Cable * For body, see www.samtec.com?ISD1 * For contacts, see www.samtec.com?CC09R www.samtec.com?CC09M = Pin 1 to Pin 2 -L3 = Pin 1 to Pin N -L4 = Pin 1 to Pin N-1 ALSO AVAILABLE (MOQ Required) Single Ended Assembly (1.00) .03937 * Other sizes * Color coded cable (*Teflon(R) not available) -L No. of positions x (1.00) .03937 + (4.30) .169 = Latching (5.55) .219 (7.00) .276 Assembled Length (3.18) .125 Assembled Length (3.18) .125 Notes: Teflon(R) cable is intended for crimp only. Contact Samtec for solderable cable applications. Some lengths, styles and options are non-standard, non-returnable. -L3 -L1 Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. -L