2.5 x 2.0mm SMD CMOS 2-OUTPUT PROGRAMMABLE OSCILLATOR AP2SM Pb RoHS Compliant FEATURES: 2.5 x 2.0 x 0.8mm | | | | | | | | | | | | | | | APPLICATIONS: * Multi-output frequencies on pin 1 and 3 * Performance comparable to fixed frequency oscillator * Low jitter and low phase noise * Low current consumption * * * * Short lead time Suitable for mass production IR-reflow capable Industrial wide temperature * Mobile phone * Wireless-LAN * PC card * DVD * DVC * DSC For Small Quantities, Delivery Time is 1-5 days ELECTRICAL SPECIFICATIONS: Characteristics Frequency Range F1 (Prime output on pin 3) F2 (Secondaly output on pin 1) Operating Temp. Range (See Options) Freq. stability over operating temp.* (See Options) Supply Voltage (Vdd) Input Current (3.3V, 15pF) Input Current (2.5V, 15pF) Input Current (1.8V, 15pF) Output Load Output VOH (15pF load) Output VOL (15pF load) Symmetry Standby Current (PIN 1 option: B) Rise Time (10%->90% Vdd) Fall Time (90%->10% Vdd) Tri-state Stand-by (See options) (Input to pin 1) Unit Minimum MHz MHz C 1 -20 ppm V V V mA mA mA -100 2.97 2.25 1.62 ---- V V % uA ns ns -90% Vdd 45 ---- uA uA psec dBc/Hz ---- Tri-state Powe Down (See options) (Input to pin 1) Disable current (Stand-by) Disable current (Power down) Jitter peak-to-peak** Phase Noise** Typical Maximum -F1 or F1/2 (See options) -- 52 -3.3 2.5 1.8 4 3 2.5 CMOS 15pF max. --50 ---pin 1 : High or Open , pin 3 : Enable pin 1 : Low , pin 3 : Disable pin 1 : High or Open , pin 3 : Enable pin 1 : Low , pin 3 : Disable with power down --40 -142 @ 1kHz (Pin 3 output 27MHz) 100 3.63 2.75 1.98 8 7 5 75 10% Vdd -55 10 10 10 200 10 -- * Inclusive of calibration @25C, operating temperature range, input voltage variation, load variation, aging, ** Jitter and Phase Noise performance depends on programming parameter and output frequency. Please contact ABRACON for different frequencies. OPTIONS & PART IDENTIFICATION: (Left blank if standard) AP2SM -Frequency- - - - Supply Voltage Blank* 1 2 3.3 V 2.5 V 1.8 V *3.3V : Standard Operating Temp. 0C to +50C -10C to +60C -20C to +70C -30C to +70C -30C to +85C -40C to +85C I D E F N L Freq. Stability J*** 20ppm R 25ppm K 30ppm C 50ppm PIN 1 **Blank **B OP1***** OE PDB F1 OP2***** F1/2 Packaging Bulk Tape and Reel *** Available for I, D, or E temp options only. Contact ABRACON for EJ or LR options. (Availability limited) **** Frequency in MHz Example part numbers; AP2SM-50.000MHz-L-R-OE-T: +/-25ppm over -40 to +85 C, 50MHz (F1) on pin 3, OE on pin 1. AP2SM-50.000MHz-L-R-OP1-T: +/-25ppm over -40 to +85 C, 50MHz (F1) on pin 3, and pin 1. AP2SM-50.000MHz-L-R-OP2-T: +/-25ppm over -40 to +85 C, 50MHz (F1) on pin 3, 25MHz (F1/2) on pin 1. ABRACON IS ISO 9001 / QS 9000 CERTIFIED Blank T ** OE: Tri-state the output buffer. ** PDB: Tri-state the output buffer and shut off the oscillator, <10A when PDB enabled. ***** OP1: Pin 1 outputs the specified frequency F1. OP2: Pin1 outputs a half of F1 frequency. Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.14.09 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 2.5 x 2.0mm SMD CMOS 2-OUTPUT PROGRAMMABLE OSCILLATOR AP2SM Pb RoHS Compliant OUTLINE DRAWING: 2.5 x 2.0 x 0.8mm | | | | | | | | | | | | | | | TAPE & REEL: Tape and reel 1,000pcs/reel Note: Recommend using an approximately 0.01uF bypass capacitor between PIN 2 and 4. Dimensions: Inches (mm) TEST CIRCUIT: Need a test socket for the AP2SM Series? To view compatible PRECISION TEST & BURN-IN SOCKETS for these parts, click here. P/N: AXS-2520-04-01 ABRACON IS ISO 9001 / QS 9000 CERTIFIED Dimensions: mm REFLOW PROFILE: NOTE: Abracon manufactured products are intended for general commercial and industrial use. For applications requiring high reliability and/or presenting extreme operating environment, written consent & authorization from Abracon is required. Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.14.09 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com