|||||||||||||||
AP2SM
2.5 x 2.0 x 0.8mm
• Mobile phone
• Wireless-LAN
• PC card
Pb
RoHS
Compliant
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
OPTIONS & PART IDENTIFICATION:
(Left blank if standard)
FEATURES:
ELECTRICAL SPECIFICATIONS:
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Revised: 09.14.09
Visit www.abracon.com for Terms & Conditions of Sale
Unit
MHz
MHz
°C
ppm
V
V
V
mA
mA
mA
V
V
%
uA
ns
ns
uA
uA
psec
dBc/Hz
* Inclusive of calibration @25°C, operating temperature range, input voltage variation, load variation, aging,
Standby Current (PIN 1 option: B) --
--
Disable current (Stand-by) --
Output Load
10--
5554 50
10
90% Vdd
10% Vdd--
Output V
OH
(15pF load) --
--
Rise Time (10%->90% Vdd)
Symmetry
--
F2 (Secondaly output on pin 1) F1 or F1/2 (See options)
8
5
Input Current (2.5V, 15pF)
Input Current (3.3V, 15pF)
2.5
1.62
Freq. stability
over operating temp.* (See Options)
Supply Voltage (Vdd)
52--
Operating Temp. Range (See Options)
002--
1.8
-100
5.252.2
3.379.2
F1 (Prime output on pin 3) 1
--
pin 1 : High or Open , pin 3 : Enable
pin 1 : Low , pin 3 : Disable
Fall Time (90%->10% Vdd) ----
----
CMOS 15pF max.
4
40
01--
Please contact ABRACON for different frequencies.
Jitter peak-to-peak**
Phase Noise** -142 @ 1kHz (Pin 3 output 27MHz)
** Jitter and Phase Noise performance depends on programming parameter and output frequency.
7--
-20
--
--
1.98
75
2.75
Tri-state Stand-by (See options)
(Input to pin 1)
10
Input Current (1.8V, 15pF)
--
3
3.63
100
Frequency Range
Characteristics mumixaMmuminiM Typical
Output V
OL
(15pF load)
--
Tri-state Powe Down (See options)
(Input to pin 1)
pin 1 : High or Open , pin 3 : Enable
pin 1 : Low , pin 3 : Disable with power down
Disable current (Power down) --
***** OP1: Pin 1 outputs the specified frequency
F1. OP2: Pin1 outputs a half of F1 frequency.
Example part numbers;
AP2SM-50.000MHz-L-R-OE-T: +/-25ppm over -40 to +85 °C, 50MHz (F1) on pin 3, OE on pin 1.
AP2SM-50.000MHz-L-R-OP1-T: +/-25ppm over -40 to +85 °C, 50MHz (F1) on pin 3, and pin 1.
AP2SM-50.000MHz-L-R-OP2-T: +/-25ppm over -40 to +85 °C, 50MHz (F1) on pin 3, 25MHz (F1/2) on pin 1.
** PDB: Tri-state the output buffer and shut
off the oscillator, <10µA when PDB enabled.
** OE: Tri-state the output buffer.
*** Available for I, D, or E temp options only.
Contact ABRACON for EJ or LR options. (Availability limited)
**** Frequency in MHz
AP2SM -Frequency- - - -
Supply Voltage Operating Temp. Freq. Stability PIN 1 Packaging
Blank* 3.3 V I 0°C to +50°C J*** ±20ppm **Blank OE Blank Bulk
1 2.5 V D -10°C to +60°C R ±25ppm **B PDB T
Tape and Reel
2 1.8 V E -20°C to +70°C K ±30ppm OP1***** F1
*3.3V : Standard F -30°C to +70°C C ±50ppm OP2***** F1/2
N -30°C to +85°C
L -40°C to +85°C
2.5 x 2.0mm SMD CMOS 2-OUTPUT
PROGRAMMABLE OSCILLATOR
APPLICATIONS:
• Multi-output frequencies on pin 1 and 3
• Performance comparable to fixed
frequency oscillator
• Low jitter and low phase noise
• Low current consumption
• Short lead time
• Suitable for mass production
• IR-reflow capable
• Industrial wide temperature
• DVD
• DVC
• DSC
For Small
Quantities,
Delivery Time
is 1-5 days
|||||||||||||||
2.5 x 2.0 x 0.8mm
Pb
RoHS
Compliant
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
Dimensions: Inches (mm)
OUTLINE DRAWING: TAPE & REEL: Tape and reel 1,000pcs/reel
TEST CIRCUIT:
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Revised: 09.14.09
Visit www.abracon.com for Terms & Conditions of Sale
AP2SM
2.5 x 2.0mm SMD CMOS 2-OUTPUT
PROGRAMMABLE OSCILLATOR
Note: Recommend using an
approximately 0.01uF bypass
capacitor between PIN 2 and 4.
Dimension : Inches (mm)
T= tape and reel (1,000pcs/reel)
Dimension : mm
Dimensions: mm
REFLOW PROFILE:
NOTE: Abracon manufactured products are intended for general commercial and
industrial use. For applications requiring high reliability and/or presenting extreme
operating environment, written consent & authorization from Abracon is required.
Need a test socket for the AP2SM Series? To view
compatible PRECISION TEST & BURN-IN SOCKETS
for these parts, click here. P/N: AXS-2520-04-01
