PN3569 PN3569 NPN General Purpose Amplifier * This device is designed for use at general purpose amplifiers and switches requiring collecor currents to 300mA. TO-92 1 1. Emitter 2. Base 3. Collector Absolute Maximum Ratings* Ta=25C unless otherwise noted Symbol VCEO Collector-Emitter Voltage Parameter Value 40 VCBO Collector-Base Voltage 80 V VEBO Emitter-Base Voltage 5.0 V IC Collector Current 500 mA TJ, TSTG Operating and Storage Junction Temperature Range - 55 ~ 150 C - Continuous Units V * These ratings are limiting values above whitch the serviceability of any semiconductor device may be impaird. NOTES: 1. These ratings are based on a maximum junction temperature of 150 degrees C. 2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Electrical Characteristics Ta=25C unless otherwise noted Symbol Off Characteristics Parameter Test Condition Min. Max. Units V(BR)CEO Collector-Emitter Sustaining Voltage * IC = 30A, IB = 0 40 V(BR)CBO Collector-Base Breakdown Voltage IC = 100A, IE = 0 80 V V(BR)EBO Emitter-Base Breakdown Voltage IE = 10A, IC = 0 5.0 ICBO Collector Cutoff Current VCB = 40V, IE = 0 50 nA IEBO Emitter Cut-off Current VEB = 4.0V, IC = 0 25 nA V On Characteristics hFE 100 100 300 DC Current Gain VCE = 1V, IC = 150mA VCE = 1V, IC = 30mA VCE(sat) Collector-Emitter Saturation Voltage IC = 150mA, IB = 15mA 0.25 V VBE(on) Base-Emitter On Voltage IC = 150mA, VCE = 1V 1.1 V Small Signal Characteristics hfe Small Signal current Gain IC = 50mA, VCE = 10V, f = 10MHz 3.0 30 * Pulse Test: Pulse Width 300s, Duty Cycle 2.0% Thermal Characteristics Ta=25C unless otherwise noted Symbol PD Parameter Total Device Dissipation Derate above 25C Max. 625 5.0 Units mW mW/C RJC Thermal Resistance, Junction to Case 83.3 C/W RJA Thermal Resistance, Junction to Ambient 200 C/W (c)2003 Fairchild Semiconductor Corporation Rev. A, November 2003 PN3569 Package Dimensions TO-92 +0.25 4.58 0.20 4.58 -0.15 0.10 14.47 0.40 0.46 1.27TYP [1.27 0.20] 1.27TYP [1.27 0.20] 0.20 (0.25) +0.10 0.38 -0.05 1.02 0.10 3.86MAX 3.60 +0.10 0.38 -0.05 (R2.29) Dimensions in Millimeters (c)2003 Fairchild Semiconductor Corporation Rev. A, November 2003 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM FACT Quiet SeriesTM ActiveArrayTM FAST(R) FASTrTM BottomlessTM FRFETTM CoolFETTM CROSSVOLTTM GlobalOptoisolatorTM GTOTM DOMETM HiSeCTM EcoSPARKTM I2CTM E2CMOSTM EnSignaTM ImpliedDisconnectTM FACTTM ISOPLANARTM Across the board. Around the world.TM The Power FranchiseTM Programmable Active DroopTM LittleFETTM MICROCOUPLERTM MicroFETTM MicroPakTM MICROWIRETM MSXTM MSXProTM OCXTM OCXProTM OPTOLOGIC(R) OPTOPLANARTM PACMANTM POPTM Power247TM PowerTrench(R) QFET(R) QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM SILENT SWITCHER(R) SMART STARTTM SPMTM StealthTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogic(R) TINYOPTOTM TruTranslationTM UHCTM UltraFET(R) VCXTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems 2. A critical component is any component of a life support which, (a) are intended for surgical implant into the body, device or system whose failure to perform can be or (b) support or sustain life, or (c) whose failure to perform reasonably expected to cause the failure of the life support when properly used in accordance with instructions for use device or system, or to affect its safety or effectiveness. provided in the labeling, can be reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. (c)2003 Fairchild Semiconductor Corporation Rev. I5