Low-Leakage Double Diode Features: * * * * * * Plastic SMD Package Low Leakage Current : typ. 3pA Switching Time : Typ. 0.8 ms Continuous Reverse Voltage : 75V Max. Repetitive Peak Reverse Voltage : 85V Max. Repetitive Peak Forward Current : 500mA Max. Applications: Low-leakage current applications in surface mounted circuits Max. Rating @ Ta = 25C unless otherwise specified Parameter Symbol Limits Unit Vrrm 85 V DC Reverse Voltage Vr 75 V Forward continuous current Single diode loaded Double diode loaded If 215 125 mA Repetitive peak forward current Ifrm 500 mA Non-Repetitive peak forward current square wave; Tj = 25C prior to surge;tp=1s tp=1ms tp=1s Ifsm Total power dissipation Ptot 250 mW Tj 150 C Tstg -65 to +125 C Repetitive peak reverse voltage Operating junction temperature range Storage temperature range 4 1 0.5 A Electrical Characteristics @ Ta = 25C unless otherwise specified Parameter Symbol Conditions Min. Max. Unit - 900 1,000 1,100 1,250 mV Forward voltage Vf If = 1mA If = 10mA If = 50mA If = 100mA Reverse leakage current Ir Vr = 75V Vr = 75V, Tj=150C - 5 80 nA Junction capacitance Cj Vr = 0V, f = 1MHz - 2 pF Reverse recovery time trr If = Ir = 10mA, Irr = 0.1 x Ir - 3 s www.element14.com www.farnell.com www.newark.com Page <1> 25/02/13 V1.0 Low-Leakage Double Diode Typical Characteristics @ Ta = 25C unless otherwise specified www.element14.com www.farnell.com www.newark.com Page <2> 25/02/13 V1.0 Low-Leakage Double Diode Plastic surface mounted package www.element14.com www.farnell.com www.newark.com Page <3> 25/02/13 V1.0 Low-Leakage Double Diode Soldering Footprint Package Information Device Package Shipping BAV170-7-F SOT-23 3,000 / Tape & Reel Part Number Table Description Part Number Low-leakage double diode BAV170-7-F Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <4> 25/02/13 V1.0