MC33164 / MC34164 5V UNDERVOLTAGE SENSING CIRCUIT T H E I P N F I N I T E O W E R O F I P N N O V A T I O N R O D U C T I O N D A T A output. This device operates from 1 to 10V input supply and drains <10A in a faultless condition and a trip level of 4.33V. Both devices are available in an 8pin, 150mil SOIC package and a plastic TO-92 package. The MC33164 is rated from -40C to 85C and the MC34164 from 0C to 70C. IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com PRODUCT HIGHLIGHT LOW-V OLTAGE MICROPROCESSOR RESET 2 R 1 POWER SUPPLY H E E T KEY FEATURES DESCRIPTION The MC33164 and the MC34164 are micropower undervoltage sensing circuits ideal for use in low-power battery applications, computer peripheral, consumer, appliance and automotive equipment. The device offers a 1.2V temperature compensated bandgap reference, a precision comparator with hysteresis and a high current open collector S RESET CDLY MICROPROCESSOR CIRCUIT LOW STANDBY CURRENT TEMPERATURE COMPENSATED BANDGAP REFERENCE PRECISION COMPARATOR WITH 50MV OF HYSTERESIS CLAMP DIODE FOR DISCHARGING DELAY CAPACITOR OUTPUT CURRENT SINK CAPABILITY FROM 7 TO 50MA 1-10V INPUT SUPPLY RANGE AVAILABLE IN 150MIL, 8PIN SOIC AND PLASTIC TO-92 PACKAGES PIN-FOR-PIN COMPATIBLE WITH MC33164 / 34164 APPLICATIONS POWER RESET GENERATOR 5V VOLTAGE MONITOR BATTERY-LEVEL DETECTOR 1.2 VREF 3 TA (C) 0 to 70 -40 to 85 PACKAGE ORDER INFO Plastic SOIC Plastic TO-92 DM 8-Pin LP 3-Pin RoHS Compliant / Pb-free Transition DC: 0440 RoHS Compliant / Pb-free Transition DC: 0509 MC34164DM MC33164DM MC34164LP MC33164LP Note: Available in Tape & Reel. Append the letters "TR" to the part number. (i.e. MC33164DM-TR) Copyright (c) 1997 Rev. 1.5a,2005-03-09 LINFINITY MICROELECTRONICS INC. 11861 WESTERN AVENUE, GARDEN GROVE, CA. 92841, 714-898-8121, FAX: 714-893-2570 1 PRODUCT DATABOOK 1996/1997 MC33164/MC34164 5 V U N D E RV O LTA G E SE N S I N G C I R C U I T P R O D U C T I O N A B S O L U T E M A X I M U M R AT I N G S D A T A S H E E T PACKAGE PIN OUTS (Note 1) Input Supply Voltage (VIN)............................................................................... -1V to 12V RESET Output Voltage (VOUT) .......................................................................... -1V to 12V Clamp Diode Forward Current .............................................................................. 100mA Operating Junction Temperature Plastic (DM - Package) ......................................................................................... 150C Storage Temperature Range ...................................................................... -65C to 150C Lead Temperature (Soldering, 10 seconds) ............................................................ 300C Peak Package Solder Reflow Temp.(40 second max. exposure)......................................260C (+0, -5) RESET INPUT N.C. GROUND 1 2 3 4 N.C. N.C. N.C. N.C. 8 7 6 5 DM PACKAGE (Top View) RoHS / Pb-free 100% Matte Tin Lead Finish Note 1. Values beyond which damage may occur. All voltages are specified with respect to ground, and all currents are positive into the specified terminal. 3. GROUND T H E R M A L D ATA 2. INPUT 1. RESET DM PACKAGE: THERMAL RESISTANCE-JUNCTION TO AMBIENT, JA 165C/W LP PACKAGE (Top View) LP PACKAGE: THERMAL RESISTANCE-JUNCTION TO AMBIENT, JA 156C/W Junction Temperature Calculation: TJ = T A + (PD x JA). The JA numbers are guidelines for the thermal performance of the device/pc-board system. All of the above assume no ambient airflow. BLOCK DIAGRAM INPUT 2(2) RESET 1(1) 1.2 VREF 4(3) GROUND 2 Copyright (c) 1997 Rev. 1.5a 9/17/2004 PRODUCT DATABOOK 1996/1997 MC33164/MC34164 5V UN D E RV O LTAGE SENSING CI R C U I T P R O D U C T I O N D A T A S H E E T R E C O M M E N D E D O P E R AT I N G C O N D I T I O N S Parameter Symbol Input Supply Voltage RESET Output Voltage Clamp Diode Forward Current Operating Ambient Temperature Range: MC34164 MC33164 TA TA (Note 2) Recommended Operating Conditions Min. Typ. Max. Units 1 10 10 50 V V mA 0 -40 70 85 C C Note 2. Range over which the device is guaranteed functional. ELECTRICAL CHARACTERISTICS (Unless otherwise specified, these specifications apply over the operating ambient temperatures of 0C TA 70C for the MC34164 and -40C TA 85C for the MC33164. Low duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.) Parameter Symbol Test Conditions MC33164 / MC34164 Min. Typ. Max. Units Total Device Operating Input Voltage Range Quiescent Input Current VIN IIN 1.0 10 20 50 V A A 4.33 4.27 0.06 4.45 4.45 V V V 0.05 0.06 0.40 0.30 50 0.5 2.0 1.2 V V mA A A V 10 19 VIN = 5.0V VIN = 10V Comparator Section Threshold Voltage High-State Output Low-State Output Hysteresis VIH VIL VH VIN Increasing VIN Decreasing Output Sink Saturation VOL Output Sink Current Output Off-State Leakage I SINK VIN = 4.0V, ISINK = 1.0mA VIN = 1.0V, ISINK = 0.25mA VIN , RESET = 4.0V VIN , RESET = 5.0V VIN , RESET = 10V Pin 1 to pin 2, (IF = 5.0mA) 4.15 4.15 0.02 RESET Output Section Clamp Diode Forward Voltage Copyright (c) 1997 Rev. 1.5a 9/17/2004 VF 7.0 0.6 3 PRODUCT DATABOOK 1996/1997 MC33164/MC34164 5 V U N D E RV O LTA G E SE N S I N G C I R C U I T P R O D U C T I O N D A T A S GRAPH / CURVE INDEX FIGURE INDEX Characteristic Curves 4 H E E T Application Circuits FIGURE # FIGURE # 1. COMPARATOR THRESHOLD VOLTAGE vs. TEMPERATURE 7. SWITCHING THE LOAD OFF WHEN BATTERY REACHES BELOW 4.3V 2. RESET OUTPUT VOLTAGE vs. INPUT VOLTAGE 8. LOW VOLTAGE MICROPROCESSOR RESET 3. RESET OUTPUT SATURATION vs. SINK CURRENT 9. VOLTAGE MONITOR 4. INPUT CURRENT vs. INPUT VOLTAGE 10. MOSFET LOW VOLTAGE GATE DRIVE PROTECTION 5. RESET DELAY TIME (LOW to HIGH) 6. RESET DELAY TIME (HIGH to LOW) Copyright (c) 1997 Rev. 1.5a 9/17/2004 PRODUCT DATABOOK 1996/1997 MC33164/MC34164 5V UN D E RV O LTAGE SENSING CI R C U I T P R O D U C T I O N D A T A S H E E T C H A R A C T E R I S T I C C U RV E S FIGURE 1. -- COMPARATOR THRESHOLD VOLTAGE vs. TEMPERATURE FIGURE 2. -- RESET OUTPUT VOLTAGE vs. INPUT VOLTAGE 10 RL = 43K to VIN 4.45 RL = 82K to VIN TA = 25C 4.40 Output Voltage - (V) Threshold Voltage - (V) 8.0 Upper Threshold High State Output 4.35 4.30 4.25 Lower Threshold Low State Output 4.20 6.0 4.0 2.0 4.15 0 -50 -25 0 25 50 75 100 0 125 4.0 2.0 6.0 8.0 10 Input Voltage - (V) Junction Temperature - (C) FIGURE 3. -- RESET OUTPUT SATURATION vs. SINK CURRENT FIGURE 4. -- INPUT CURRENT vs. INPUT VOLTAGE 500 RL = TA = 25C VIN = 4V TA = 25C 400 120 Input Current - (A) (VOL) Output Saturation - (mV) 140 300 200 100 80 60 40 100 20 0 0 0 3 6 9 12 (ISINK) Sink Current - (mA) Copyright (c) 1997 Rev. 1.5a 9/17/2004 14 0 2 4 6 8 10 12 Input Voltage - (V) 5 PRODUCT DATABOOK 1996/1997 MC33164/MC34164 5 V U N D E RV O LTA G E SE N S I N G C I R C U I T P R O D U C T I O N D A T A S H E E T CHARACTERISTIC CURVES FIGURE 5. -- RESET DELAY TIME (LOW TO HIGH) FIGURE 6. -- RESET DELAY TIME (HIGH TO LOW) VIN VIN 43K 5V 4V 4V RESET REF 100% 5V 5V 4V 4V VIN = 4.0V to 5.0V RL = 43K TA = 25C 2s/DIV. 6 RESET REF 100% 0% 43K 5V 0% VIN = 4.0V to 5.0V RL = 43K TA = 25C 0.5s/DIV. Copyright (c) 1997 Rev. 1.5a 9/17/2004 PRODUCT DATABOOK 1996/1997 MC33164/MC34164 5V UN D E RV O LTAGE SENSING CI R C U I T P R O D U C T I O N D A T A S H E E T T Y P I C A L A P P L I C AT I O N C I R C U I T S 2 R 1 RESET POWER SUPPLY CDLY MICROPROCESSOR CIRCUIT LOAD 2 1 RESET 1.2 VREF 3 1.2 VREF A time delayed reset can be accomplished with the addition of C DLY. For systems with extremely fast power supply rise times (< 500ns) it is recommended that the RC DLY time constant be greater than 5.0s. VTH(MPU) is the microprocessor reset input threshold. 4 tDLY = R CDLY In FIGURE 7. -- SWITCHING THE LOAD OFF WHEN BATTERY VOLTAGE REACHES BELOW 4.3V 1 VTH(MPU) 1- V IN FIGURE 8. -- LOW-VOLTAGE MICROPROCESSOR RESET VCC 270 4.3V RL SMP60N03-10L 1.0k 2 1 2 1 POWER SUPPLY RESET 1.2 VREF 1.2 VREF 3 FIGURE 9. -- VOLTAGE MONITOR Copyright (c) 1997 Rev. 1.5a 9/17/2004 3 Overheating of the logic level power MOSFET due to insufficient gate voltage can be prevented with the above circuit. When the input signal is below the 4.3 volt threshold of the MC34164, its output grounds the gate of the L2 MOSFET. FIGURE 10. -- MOSFET LOW-VOLTAGE GATE DRIVE PROTECTION 7