Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Supply Voltage, V
CC
/V
EE
±18V
Differential Input Voltage, V
ID
(Note 2) ±30V
Common Mode Input Voltage, V
IC
(Note 2) ±15V
Power Dissipation, P
D
(Note 3) 1.2W (N)
830 mW (M)
Operating Temperature Range, T
OPR
−40˚C to +85˚C
Storage Temperature Range, T
STG
−60˚C to +150˚C
Soldering Information
Dual-In-Line Package
Soldering (10 seconds) 260˚C
Small Outline Package
Vapor Phase (60 seconds) 215˚C
Infrared (15 seconds) 220˚C
ESD rating to be determined.
See AN-450 “Surface Mounting Methods and Their Effect
on Product Reliability” for other methods of soldering
surface mount devices.
DC Electrical Characteristics
T
A
= 25˚C, V
S
=±15V
Symbol Parameter Condition Min Typ Max Units
V
OS
Input Offset Voltage R
S
=50Ω0.3 5 mV
I
OS
Input Offset Current 10 200 nA
I
B
Input Bias Current 500 1000 nA
A
V
Large Signal Voltage Gain R
L
=2kΩ,V
OUT
=±10V 90 110 dB
V
OM
Output Voltage Swing R
L
=2kΩ±
12 ±13.5 V
R
L
= 600Ω±10 ±12.5 V
V
CM
Common Mode Input Voltage ±12 ±14.0 V
CMRR Common Mode Rejection Ratio V
IN
=±12V 80 100 dB
PSRR Power Supply Rejection Ratio V
S
=15∼5, −15 ∼−5 80 100 dB
I
S
Power Supply Current R
L
=∞, Four Amps 10 15 mA
AC Electrical Characteristics
T
A
= 25˚C, V
S
=±15V
Symbol Parameter Condition Min Typ Max Units
SR Slew Rate R
L
= 600Ω8 10 V/µs
GBW Gain Bandwidth Product f = 100 kHz, R
L
= 600Ω15 25 MHz
Design Electrical Characteristics
T
A
= 25˚C, V
S
=±15V (Note 4)
Symbol Parameter Condition Min Typ Max Units
PBW Power Bandwidth V
O
=25V
P-P
,R
L
= 600Ω, THD <1% 200 kHz
e
n1
Equivalent Input Noise Voltage JIS A, R
S
= 100Ω0.5 µV
e
n2
Equivalent Input Noise Voltage f = 1 kHz 4.5 nV/
i
n
Equivalent Input Noise Current f = 1 kHz 0.7 pA/
THD Total Harmonic Distortion A
V
=1,V
OUT
= 3 Vrms,
f=20∼20 kHz, R
L
= 600Ω0.0015 %
f
U
Zero Cross Frequency Open Loop 12 MHz
φ
m
Phase Margin Open Loop 45 deg
Input-Referred Crosstalk f = 20 ∼20 kHz −120 dB
∆V
OS
/∆T Average TC of Input Offset Voltage 2 µV/˚C
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is func-
tional, but do not guarantee specific performance limits. Electrical Characteristics state DC andAC electrical specifications under particular test conditions which guar-
antee specific performance limits. This assumes that the device is within the Operating Ratings. Specifications are not guaranteed for parameters where no limit is
given, however, the typical value is a good indication of device performance.
Note 2: Unless otherwise specified the absolute maximum input voltage is equal to the power supply voltage.
LM837
www.national.com 2