Introduction | 61 Handles / Actuators | 62 Configurations | 67 Operating Characteristics | 69 Delay Curves & Specs | 70 Specifications | 71 Hardware | 72 Decision Tables | 73 T/R/PP/PR CR/CPP/CPR (SNAPAK(R)) SNAPAK(R) Series Magnetic Circuit Protectors T/R/PP/PR CR/CPP/CPR Series Hydraulic Magnetic Circuit Protectors (SNAPAK(R)) INTRODUCTION The AirpaxTM SNAPAK(R) series is a snap-acting hydraulicmagnetic circuit protector that combines power switching and accurate, reliable circuit protection in one aesthetically pleasing package. The SNAPAK(R) combines the functions of three separate components: power switch, fuse and fuse holder. To the OEM, this means that only one item has to be mounted instead of three. Less assembly is required, inventory is cut by twothirds and greater panel density is obtainable with less clutter. In addition, the SNAPAK(R) can be operated at either DC or 50/60Hz, eliminating the need to specify, order and stock separate units. 400Hz units are also available. Since the SNAPAK(R) is snap-acting, it assures immediate opening and closing of the contacts. Its design also prevents operator "teasing" of the contacts and minimizes arcing. SNAPAK(R) circuit protectors are UL Recognized as supplementary protectors per UL STD. 1077, CSA Certified as supplementary protectors per CSA STD. C22.2 No. 235, VDE Approved as circuit breakers for equipment per STD. EN 60934, CCC Approved (customer must request product be manufactured in China) and CE Compliant. In addition, most versions are certified by UL to meet spacing requirements of IEC 950 for basic and functional insulation for front panel mounting. To enhance front-panel aesthetics, SNAPAK(R) is offered with paddle and rocker handles in six attractive colors and push-pull and push-to-reset actuators. Also offered is a variety of optional mounting hardware. The push-pull version is supplied with a black button with a white indicating band. Consult factory for details and exceptions. Typical applications include office appliances, electronic data processing, medical equipment, business machines, vending and amusement machines. Push-pull versions are particularly well suited for medical instrumentation, automotive production transfer lines and other applications where accidental turn off is unacceptable. For those applications which do not require circuit protection, SNAPAK(R) is offered in a power-switch-only configuration. Orientation of the button when marked with an amperage notation must be specified when using the fourth decision table. Push-to-reset is supplied with a contrasting color indicating shaft. In addition, SNAPAK(R) is offered in SPST and DPST configurations. The single pole satisfies most applications. The two-pole version is often used for extra safety in products that utilize high voltage or where current sensing and breaking of both sides of the line is required. Quick connect terminals are standard, UNC 8-32 or M4 screw terminals are available as additional termination options. 61 SNAPAK(R) Series - Introduction http://airpax.sensata.com/ T/R/PP/PR CR/CPP/CPR (SNAPAK(R)) TOGGLE ACTUATION MAGNETIC CIRCUIT PROTECTORS Mounting Details with Locking Ring .500 .010 .000 .355 [12.70 .025 ] [9.02] TOGGLE ACTUATORS The SNAPAK(R) is available with paddle handles in six attractive colors. Engineered for safe, sure operation, the paddle handles may be specified in blue, white, red, green, yellow or black. .000 .125 [3.18] without Locking Ring .500 .010 .000 .222 0.002 [12.70 .025 ] [5.64 0.05] .000 PANEL CUTOUT SHOWN ABOVE MAY BE MADE WITH GREENLEE RADIO CHASSIS PUNCH #733 x 1/2" DIA. Note: Mounting Tolerance .005 [.13] unless noted angles: 5. Dimensions in Brackets [ ] are millimeters. Single Pole, Toggle .680 0.010 .125 0.010 [17.27 0.25] 1/2 - 32 THD [3.17 0.25] 15 2 1.125 0.030 .031 [0.79] Paddle Handle [28.58 0.76] 1 LINE FLAT .250 .375 0.010 [6.35] [9.53 0.25] ON 15 OFF 1.375 0.010 [34.93 0.25] 0.500 0.030 [12.70 0.76] 1.715 0.030 [43.56 0.76] .468 0.010 [11.89 0.25] Two Pole, Toggle .625 0.010 [15.88 0.25] POLE 1 2 1/2 - 32 THD [3.17 0.25] POLE 2 15 4 1.125 0.030 .031 [0.79] 1.304 0.010 .125 0.010 Paddle Handle [28.58 0.76] 1 LINE LINE 3 FLAT .250 .375 0.010 [6.35] [9.53 0.25] ON 15 OFF [33.12 0.25] 1.375 0.010 [34.93 0.25] 0.500 0.030 1.715 0.030 [43.56 0.76] [12.70 0.76] .468 0.010 [11.89 0.25] http://airpax.sensata.com/ SNAPAK(R) Series - Toggle 62 ROCKER HANDLES WITH ILLUMINATION OPTIONS SNAPAKs are offered in single and two pole rocker styles in a choice of black, white or gray body colors. Handle color in nonilluminated types may be black, red, white or orange. Neon or light emitting diode (LED) illumination may be specified with a variety of options. Mounting Detail .710 .010 .000 [18.03 .025 ] .000 DIM. A (SEE TABLE) SNAPAK(R) circuit protectors with a second pole are available in paddle handle, push-pull, push-to-reset and rocker handle versions. Rocker, Single Pole 0.125 0.010 [3.18 0.25] 1.375 0.010 [34.93 0.25] 0.030 0.325 [8.26 0.76] 0.680 0.010 [17.27 0.25] 0.770 0.010 [19.56 0.25] 2 1.125 0.030 [28.58 0.76] 0.375 0.010 [9.53 0.25] 1.840 0.030 [46.74 0.76] 0.093 0.010 [2.36 0.25] Handle Guards The SNAPAK(R) circuit protector is available with an optional handle guard as an integrated part of the snap-in mounting design. Available for rocker actuators, the guard helps in providing protection from accidental "turn-off." Please refer to the SNAPAK(R) Part Number Decision Tables; fourth decision. ON 1.560 0.010 [39.62 0.25] 0.031 [0.79] OFF 0.972 0.010 [24.69 0.25] 1 LINE 0.250 [6.35] 0.400 0.010 [10.16 0.25] Handle Guards, Single Pole 0.305 0.010 [7.75 0.25] 1.047 0.010 [26.60 0.25] Handle Guards, Two Pole 0.305 0.010 [7.75 0.25] 1.047 0.010 [26.60 0.25] 63 SNAPAK(R) Series - Rocker Handles http://airpax.sensata.com/ Panel Thickness 0.125 [3.18] 0.093 [2.36] 0.062 [1.57] Dimension "A" 1.460 [37.08] 1.420 [36.07] 1.385 [35.18] 1.329 .010 .000 [33.76 .025 ] .000 DIM. A (SEE TABLE) Note: Tolerance for Mtg. .005 (.13) Rocker, Two Pole 1.304 0.010 [33.12 0.25] 0.030 0.325 [8.26 0.76] 0.125 0.010 [3.18 0.25] 1.375 0.010 [34.93 0.25] POLE 1 2 1.125 0.030 [28.58 0.76] 0.375 0.010 [9.53 0.25] 0.031 [0.79] 1.840 0.030 [46.74 0.76] 0.093 0.010 [2.36 0.25] 1 LINE 1.394 0.010 [35.41 0.25] POLE 2 4 1.560 0.010 [39.62 0.25] 1 LINE ON 0.972 0.010 [24.69 0.25] OFF LINE 3 0.250 [6.35] Illuminated Handle Single Pole 2 T/R/PP/PR CR/CPP/CPR (SNAPAK(R)) Mounting Detail FRONT SNAP-IN MOUNT (STD) 0.400 0.010 [10.16 0.25] 0.625 0.010 [15.88 0.25] Two Pole LOAD LINE 4 2 1 LINE LINE 3 RED (+), BLACK(-) 7.00 0.50 RED (+), BLACK (-) [177.8 12.7] [177.8 12.7] LOAD LINE 7.00 0.50 Note: Tolerance .005 [.13] unless noted angles: 5. Dimensions in Brackets [ ] are millimeters. http://airpax.sensata.com/ SNAPAK(R) Series - Rocker Handles 64 PUSH-PULL, PUSH-TO-RESET ACTUATORS SNAPAK(R) may also be ordered with Push-Pull, or Pushto-Reset actuator buttons. As an option, the button can be embossed with the current rating (Push-Pull option only). Push-Pull, Single Pole Push-Pull, Two Pole 1.960 0.030 [49.78 0.76] 1.960 0.030 [49.78 0.76] .400 0.010 [10.16 0.25] .400 0.010 [10.16 0.25] FLAT FLAT Push-Pull Actuation Push-Pull Actuation .375 0.010 [9.53 0.25] 0.500 0.030 OFF (SHOWN) [12.70 0.76] 3/8 - 32 THD WHITE BAND VISIBLE IN OFF POSITION ONLY 1.125 0.030 [28.58 0.76] 0.250 0.030 ON [6.35 0.76] 1.125 0.030 [28.58 0.76] .125 0.010 [3.18 0.25] .250 [6.35] POLE 1 1.375 0.010 [34.93 0.25] .680 0.010 [17.27 0.25] Mounting Detail 1.304 0.010 [33.12 0.25] Push-to-Reset Actuation (Single Pole and Two Pole) (Single and Two Pole) .375 .010 .000 [9.53 .025 ] .000 Note: Tolerance .005 [.13] unless noted angles: 5. Dimensions in Brackets [ ] are millimeters. 65 POLE 2 .031 [.79] 1.375 0.010 [34.93 0.25] .162 0.002 [4.11 0.05] LINE 3 .625 0.010 [15.88 0.25] 1 LINE .031 [.79] 0.250 0.030 ON [6.35 0.76] WHITE BAND VISIBLE IN OFF POSITION ONLY 2 1 LINE 2 .250 [6.35] 0.500 0.030 OFF (SHOWN) [12.70 0.76] 3/8 - 32 THD 4 .125 0.010 [3.18 0.25] .375 0.010 [9.53 0.25] SNAPAK(R) Series - Push-Pull / Push-to-Reset 0.76 0.030 OFF [6.35 0.25] FLUSH 0.030 ON [FLUSH 0.25] http://airpax.sensata.com/ T/R/PP/PR CR/CPP/CPR (SNAPAK(R)) Toggle SCREW TERMINALS Available as straight screw terminals with UNC 8-32 and Metric M4 screw types, bus-type connect (flat) or upturned lugs (tabs), with UL, CSA and TUV approvals available. Screw terminals are available for all handle options (rocker, toggle, push-pull, push-to-reset). Single pole only, series only, non-auxiliary switch configurations. DIM. "A" (SEE TABLE) Push Button DIMENSION "A" Handle Style Screw Terminal "A" Dimension Toggle Straight 1.773 [45.03] Push Button Straight 2.180 [55.37] Rocker Straight 2.058 [52.27] DIM. "A" (SEE TABLE) Rocker DIM. "A" (SEE TABLE) Straight 0.582 TABS [14.78] 0.561 FLAT [14.25] 0.597 [15.16] 1.067 [27.11] 0.374 [9.50] http://airpax.sensata.com/ 30 0.374 [9.50] 0.574 [14.58] 0.597 [15.16] 25 1.067 [27.11] 0.374 0.374 [9.50] [9.50] SNAPAK(R) Series - Screw Terminals 30 66 CONFIGURATIONS Series Trip The most popular configuration for magnetic protectors is the series trip where the sensing coil and the contacts are in series with the load being protected. In addition to providing conventional overcurrent protection, it is simultaneously used as an on-off switch. Two Pole Series Trip Single Pole LOAD 2 1 LINE LINE Shunt Trip Single Pole Shunt Trip The shunt trip is designed for controlling two separate loads with one assembly. The control is established by providing overload protection for the critical load. When the current through this load becomes excessive and reaches the trip point, the protector will open and remove power from both loads simultaneously. The current rating of both loads must not exceed the maximum contact rating. 1 LINE LINE 3 LINE Two Pole ( 1 pole shunt) SHUNT 4 2 LOAD LOAD LINE 1 LINE LINE 3 WHITE LEAD 7.00 0.50 [177.8 12.7] [177.8 12.7] LINE Two Pole (1 pole relay) LOAD 2 SHUNT LOAD WHITE LEAD 7.00 0.50 Relay Trip (Note A) Single Pole Relay Trip This permits the overload sensing coil to be placed in a circuit which is electrically isolated from the contacts. The coil may be actuated by sensors monitoring pressure, flow, temperature, speed, etc. Other typical applications include crowbar, interlock and emergency/rapid shutdown circuitry. Trip may be accomplished by voltage or current, which must be removed after trip. LOAD 4 2 COIL 4 2 LOAD COIL COIL 1 LINE LINE COIL 1 LINE LINE 3 WHITE LEAD 7.00 0.50 WHITE LEAD 7.00 0.50 [177.8 12.7] [177.8 12.7] LINE Note A: Coil Ratings to 5 amperes maximum. Contact ratings are 7.5 amperes at 50 Vdc and 250 Vac; 15 amperes at 120 Vac; 32 Vdc. Note: T olerance .005 [.13] unless noted. Dimensions in Brackets [ ] are millimeters. 67 SNAPAK(R) Series - Configurations http://airpax.sensata.com/ T/R/PP/PR CR/CPP/CPR (SNAPAK(R)) Auxiliary Switch (Note B) Single Pole Auxiliary Switch This is furnished as an integral part of a series pole in single or, multi-pole assemblies. Isolated electrically from the protectors circuit, the switch works in unison with the power contacts and provides indication at a remote location of the protector's ON-OFF status. 2 0.040 [1.02] DIA. HOLE 0.093 C N C (FOR SOLDER ATTACHMENT) [2.36] N O 1 LINE .100 to 20.0 amps, NON-VDE & NON-TUV >20amps VDE, TUV >20amps & U3 Construction .560 0.030 LOAD LOAD C NC NO Voltage Trip Sometimes called "dump circuits" or "panic trip circuits," these units make it possible to open main power contacts with lower power inputs from one or more sources. This configuration is becoming increasingly more important for sensitive circuitry and denser packaging in automation systems. Available in series, shunt or relay configurations. [14.22 0.76] NC NO C LINE LINE BREAKER SHOWN IN OFF POSITION BREAKER SHOWN IN OFF POSITION Auxiliary Switch (Note B) Two Pole 4 2 [2.36] N O (FOR SOLDER ATTACHMENT) LINE 3 1 LINE Power Switch In the event that over-current protection is not desired, the coil mechanism can be deleted, providing an excellent low cost single or double-pole power switch. Maximum current rating is 20 amps. 0.040 [1.02] DIA. HOLE 0.093 C N C .100 to 20.0 amps, NON-VDE & NON-TUV >20amps VDE, TUV >20amps & U3 Construction LOAD C NC NO LOAD .560 0.030 [14.22 0.76] NC NO C LINE LINE BREAKER SHOWN IN OFF POSITION BREAKER SHOWN IN OFF POSITION Note B: Switch is located in the left hand pole (viewed from terminal end). http://airpax.sensata.com/ SNAPAK(R) Series - Configurations 68 OPERATING CHARACTERISTICS MAXIMUM DCR AND IMPEDANCE Inrush Pulse Tolerance Many circuit protector applications involve a transformer turn-on, an incandescent lamp load, or a capacitor charge from a DC source. Each of these applications has one common factor: a steep transient of very high current amplitude and short duration. This takes the form of a spike or a single pulse and is the cause of most nuisance tripping associated with magnetic circuit breakers. Current Ratings (Amps) SNAPAK will withstand, without tripping, a single pulse of 8 milli-seconds duration (half sine wave configuration) and peak amplitude of 9 times its rating without the inertia wheel and 13 times its rating with an inertia wheel. (Not applicable to instant trip delays). (R) T/R/PP/PR T/R/PP/PR DC Resistance 50/60Hz Impedance CR/CPP/CPR DC Resistance .100 175 181 274 .500 6.34 6.63 9.77 1.00 1.63 1.69 2.31 2.00 .400 .425 .465 3.00 .175 .188 .261 4.00 .103 .106 .156 5.00 .076 .078 .091 7.50 .038 .039 .053 10.0 .026 .028 .023 12.5 .020 .021 .020 15.0 .013 .014 .010 20.0 .010 .011 .008 25.0 .004 30.0 .003 DCR and Impedance is measured after 1 hour at 100% rated current using the Voltmeter-Ammeter Method. PULSE TOLERANCE Delay Pulse Tolerance 1, 2, 61, 62 *9 Times Rated Current 3, 4, 61F, 62F *13 Times Rated Current * Units above 15 amps are derated to 8 and 12 times rated current PERCENTAGE OF RATED CURRENT VS TRIP TIME IN SECONDS AT +25C (VERTICAL MOUNT) Delay 100% 135% 150% * 200% 400% 600% 800% Instant No Trip May Trip .100 Max .100 Max .100 Max .100 Max .100 Max Fast No Trip .3 to 7 .2 to 5 .1 to 2 .03 to .50 .015 to .30 .010 to .150 Slow No Trip 3 to 70 2 to 40 1 to 15 .10 to 4.0 .015 to 2.0 .010 to .800 * Minimum trip for all instantaneous and 400Hz units. 69 SNAPAK(R) Series - Operating Characteristics http://airpax.sensata.com/ DELAY CURVES & SPECIFICATIONS INSTANT 1000 400 Hz, DC, 50/60Hz Delay Curves (typ) A choice of delays is offered for DC, 50/60Hz and 400Hz applications. Delays 0, 49, 59 and 69 provide fast-acting, instantaneous trip and are often used to protect sensitive electronic equipment (not recommended where known inrush exists). Delays 1, 41, 51 and 61 have a short delay for general purpose applications. Delays 2, 42, 52 and 62 are long enough to start certain types of motors and most transformer and capacitor loads. 10 1 MAY TRIP TIME IN SECONDS 100 .1 .01 .001 0 100 150 200 135 300 400 500 600 700 800 900 1000 PERCENT OF RATED CURRENT Trip Free Will trip open on overload, even when forcibly held on.This prevents operator from damaging the circuit by holding handle in the ON position. Trip Indication The operating handle moves forcibly and positively to the OFF position on overload. 10000 1000 T/R/PP/PR CR/CPP/CPR (SNAPAK(R)) 10000 FAST Ambient Operation Operates normally in temperatures between -40 C and +85C. MAY TRIP TIME IN SECONDS 100 10 1 Insulation Resistance Not less than 100 megohms at 500Vdc. .1 .01 .001 0 100 150 200 135 300 400 500 600 700 800 900 1000 PERCENT OF RATED CURRENT Endurance Mechanical life in excess of 50,000 operations. In many applications, however, contact wear due to the electrical load determines unit life. At maximum electrical ratings, the SNAPAK(R) can perform 10,000 operations at rated current and voltage. Under UL 1077, the SNAPAK(R) can perform 50 operations at 150% of maximum rated current followed by 6,000 operations at maximum rated current. Under VDE 0642 (EN60934) the SNAPAK(R) can perform 6,000 electrical operations. After any endurance cycle, the breaker will calibrate and have working dielectric strength. 10000 100 TIME IN SECONDS SLOW MAY TRIP 1000 Dielectric Strength Withstands 1500 volts, 60Hz for 60 seconds or 1800Vac for one second between all electrically isolated terminals. 10 1 .1 .01 .001 0 100 150 200 135 300 400 500 600 700 800 900 1000 PERCENT OF RATED CURRENT http://airpax.sensata.com/ SNAPAK(R) Series - Delay Curves & Specifications 70 AGENCY APPROVALS (T/P/PP/PR SUPPLEMENTARY PROTECTORS) Voltage (Volts), Frequency (hz), Phase, Min Poles, TC, OL Current (Amps) Short Circuit Current Rating (Amps) Voltage Frequency (Hz) Phase Min. Poles TC OL UL/CSA VDE UL 1077 & CSA VDE 32 DC - 1 1 0 .10-30(3) .10-20 U1, 1000 500 38 DC - 1 1 0 .10-15 - U2, 1000 / U1, 1000 - 65 DC - 1 1 0 .10-7.5 - U2, 500 /U1, 500 - 65 DC - 2 1 0 .10-15 - U1, 1000 - 65 DC - 2 1 0 .10-20 .10-20 U2, 500 / U1, 500 500 Notes PR only 65(2) DC - 1 1 0 .10-30 .10-30 U2, 120 120 R, PP, PR only 65(2) DC - 2 only 1 0 .10-25 - U1, 100 - R only R only 65(2) DC - 2 1 0 .10-25 - U2, 500 - 125 50/60 1 1 1 0 .10-20 7.6-20 U1, 1000 500 125 50/60 1 1 1 0 .10-30(3) - U1, 1000 - T only 125(2) 50/60 1 1 1 0 .10-30 - U2, 1000 - R, PP, PR only 125(2) 50/60 1 1 1 1 .10-30 20.1-30 U3, 300(1) 500 R, PP, PR only 120/240 50/60 1 2 2 0 .10-20(3) - U2, 1000 - 120/240 50/60 1 2 2 0 .10-30(3) - U1, 650 - 125/250 50/60 1 2 2 0 .10-20 - U1, 1000 - 250 50/60 1 1 2 0 .10-20 .1-7.5 U1, 500 500 250 50/60 1 1 1 0 .10-7.5 - C1, 1000(4) - 250 50/60 1 2 2 0 .10-20 .10-20 U1, 1000 500 250(2) 50/60 1 2 1 1 .10-30 - U3, 300 - 125 400 1 1 2 0 .10-20 - U1, 1000 - 125/250 400 1 2 2 0 .10-20 - U1, 1000 - 250 400 1 2 2 0 .10-20 - U1, 1000 - 250 400 1 1 2 0 .10-7.5 - U1, 1000 - R only CR/CPP/CPR COMMUNICATIONS EQUIPMENT CIRCUIT BREAKERS 65 DC - 1 only - - .10-30 .10-30 1000 1000 80 DC - 1 only - - .10-30 .10-30 600 600 (1) Non-standard construction. "Fit For Further Use" approval; (2) Non-snap action design; (3) No auxiliary switch available above 20A; (4) With 30A max. series fuse General notes: All supplementary protectors are of the overcurrent (OC) type The family of protectors has been evaluated for end use application for use group (UG) A The terminals (FW) are suitable for factory wiring only (0) The maximum voltage ratings for which the protectors have been tested are shown in the chart The current is the amperage range that the protectors have been tested The tripping current (TC) for the protectors is either "1" (in the range of 125% to 135% of ampere rating) or "2" (more than 135% of ampere rating) The overload rating (OL) - designates whether the protector has been tested for general use or motor starting applications. 0 - tested at 1.5 times amp rating for general use 1 - tested at 6 times AC rating or 10 times DC rating for motor starting The short circuit current rating (SC) - The short circuit rating in amperes following a letter and number designating the test conditions and any calibration following the short circuit test is defined below: AUXILIARY SWITCH RATING Silver 3.0 amps @ 120 VAC --- 1.5 amps @ --- 32 VDC @ 32 VAC 32VDC Ounces Grams Rocker Configuration 0.9 25 Toggle, PP, PR 1.2 32 Gold .100 amps APPROXIMATE WEIGHT PER POLE 71 SNAPAK(R) Series - Specifications C - Indicates short circuit test was conducted with series overcurrent protection U - Indicates short circuit test was conducted without series overcurrent protection 1 - Indicates a recalibration was not conducted as part of the short circuit testing 2 - Indicates a recalibration was performed as part of the short circuit testing 3 - Indicates recalibration was performed along with the dielectric and voltage withstand for "Suitable for Further Use" rating Short Circuit Interrupting Capacity 1000 amperes maximum for UL and CSA, 500 amperes maximum for VDE. Consult factory for details. Handle and Body Material The handle and upper body material is polycarbonate and the lower body is PET. Chemical Resistance Handle and case may be cleaned with detergents or alcohols and should be restricted to outside surfaces only. Organic solvents are not recommended. Special attention should be given when solvents are used to remove excess flux from terminals. No oils or lubricants should be introduced into handle openings or onto bushing threads. IEC, UL, CSA, SEV, VDE, CCC, CE, TUV Recognized by UL to STD-1077 and UL certified to spacing requirements of IEC 950 for basic and functional insulation for front panel mounting. Certified by CSA, file number LR26229 as recognized supplementary protectors, SEV approved, CCC approved, TUV approved (including screw terminals) and VDE approved to VDE 0642. VDE approval of unmarked rocker handle option for appliance disconnect requires status of protectors to be indicated on the panel. Only VDE approved part numbers will be marked CE compliant. See shaded areas of part number decision tables for approved configurations and/or consult factory for exceptions and limitations. Shock Withstands 75G without tripping while carrying full rated current per MIL-STD-202, Method 213, Test Condition I. Instant trip breakers are tested at 80% of rated current. Vibration Time delayed units withstand 10G without tripping while carrying full rated current per MIL-STD-202, Method 204, Test Condition A. Instant trip breakers are tested at 80% of rated current. UL 489A Listed The CR, CPP and CPR are dimensionally the same as the popular R, PP and PR Snapack products, but provide UL listing to UL489A for Communications Equipment. Available only in single pole with DC trip time delays for series or series with silver auxiliary switch configurations. As a circuit breaker, the CR, CPP or CPR provides communication equipment manufacturers with a UL listed circuit breaker in an extremely compact package that meets the stringent environmental requirements of today's marketplace. This makes the CR, CPP and CPR ideal for switching, transmission and wireless applications. http://airpax.sensata.com/ Indicator Plates SNAPAK(R) toggle handle circuit protectors may be specified with indicator plates for either vertical or horizontal mounting. The "ON-OFF/O-I" plate is standard. ON O F F O N OFF Note 1: -A -B Vertical Mount Horizontal Mount 0.680 [17.27] 0.180 [4.57] - 20 & -21 - 10 & -11 Knurled Nut 0.625 [15.88] To allow for installation clearances, the minimum recommended distances between centers of panel openings should be: 0.680 [17.27] 0.125 [3.18] Panel Dress Nut 0.680 [17.27] 0.125 [3.18] - 31 0.031 [0.79] RECOMMENDED CENTER DISTANCES FOR PANEL OPENINGS Breaker Type Distance, inches [mm] T11 0.750 [19.05] T21 1.375 [34.93] PP11 & PR11 0.750 [19.05] PP21 & PR21 1.375 [34.93] R11 0.805 [20.45] R21 1.429 [36.30] Note 2: Torque on mounting hardware is not to exceed 25 inch-pounds for 1/2 inch bushings or 15 inch-pounds for 3/8 inch bushings. -L Hex Nut T/R/PP/PR CR/CPP/CPR (SNAPAK(R)) HARDWARE Paddle Handle Hardware Locking Ring (Toggle) Push-Pull & Push-to-Reset Hardware 0.534 [13.56] 0.078 [1.98] 0.156 [3.96] Miscellaneous Hardware SNAPAK(R) circuit protectors with 1/2-32 thread may also be equipped with optional locking rings to prevent rotation of the unit after it is installed. 3/8 - 32 Panel Nut Bright Nickel 0.500 [12.7] Mounting Nuts (Toggle) A choice of knurled, dress and hex nuts are available. All three are available in bright nickel. The knurled and dress nuts are also available in a matte black finish. Every SNAPAK(R) comes with a hex nut, but you may order the front panel nuts which will best enhance your design. 0.156 [3.96] 3/8 - 32 Hex Nut and Panel Nuts The hardware will be supplied with each Push-Pull (PP) and Push-to-Reset (PR). 3/8 - 32 Panel Nut This nut when reversed will provide alignment in .437 (11.1) and .468 (11.88) diameter round panel holes. 3/8 - 32 Hex Nut Bright Nickel Note: Tolerance .010 [.25] unless noted. Dimensions in brackets [ ] are millimeters. http://airpax.sensata.com/ SNAPAK(R) Series - Hardware 72 HOW TO ORDER The ordering code for the SNAPAK(R) circuit protectors may be determined by following the steps in the decision tables shown here. The coding given permits a selfassigning part number, with certain limitations (due to the adaptability of magnetic protectors to complex circuits), requires a factory-assigned part number. The example shown is the code for a paddle handle, single pole (UL construction), series circuit protector designed for operation of a 50/60Hz/DC circuit. A slow time delay and rating of 5 amperes has been indicated. Handle color is black, and a bright nickel knurled nut, vertical mount (ON-OFF) indicator plate and locking ring are to be supplied. To determine the ordering code for your particular SNAPAK(R) unit, simply follow the steps shown, then fill in the letters and/or numbers in the boxes. Space is available on the circuit breaker label for your part number (up to 12 digits). You may then use your own part number to place an order or as a reference for further questions you may have. This option does require a factory assigned part number for traceability to your drawing or internal part number. 1 First Decision Handle Poles Configurations* Terminals T Paddle Handle 1 Single Pole 0 Switch Only (Note E) PP Push-Pull 4 Single Pole 1 Series Circuit Protector PR Push-To-Reset 2 Two Pole 3 Shunt Circuit Protector R Rocker 5 Two Pole CR Rocker ** Quick Connects (leave blank) S 4 Relay Circuit Protector 5 Series w/ Silver Aux. Switch CPP Push-Pull ** 6 Series w/ Gold Aux. Switch CPR Push to Reset ** 9 Mixed Construction (Two Pole Only) UL & CSA Construction Non UL & CSA Construction Auxilary Switch is located in the left hand pole (viewed from terminal end) Does not meet spacings for many IEC / VDE equipment specs. Consult factory for additional information. * Multi-pole units with mixed construction, poles numbered left to right when viewed from terminal end. Shunt or relay construction available in pole 2 only, other pole must be a series or switch only construction. **UL 489A listed, available in 1 pole series or series w/silver aux. switch. DC delay only Screw Terminals, Single pole (-1) and series only (5th decision, group V - screw terminal option is required when 1st decision "S" is specified) T11 - 2- 5.00A - 01-11AL- V 21 1 Second Decision 2 3 4 5 Frequency & Delay -0 Instant DC-50/60 Hz -1 Fast DC-50/60 Hz -2 Slow DC-50/60 Hz -3 Fast w/ Inertia Wheel DC-50/60 Hz -4 Slow w/ Inertia Wheel DC-50/60 Hz -41 Fast 400 Hz* -42 Slow 400 Hz* -49 -51 Instant 400 Hz Fast DC+ -52 Slow DC+ -59 Instant DC+ -61 Fast 50/60 Hz* -62 Slow 50/60 Hz* -69 Instant 50/60 Hz -S Switch Pole or Special Delay 3 Third Decision Rated Current Circuit Breaker Construction Use three numbers to print required current value between .100 amps minimum and 30.0 amps maximum. For example, use: .100 or 2.00 or 10.0 Switch Only Construction -SW Maintained SPST & DPST *For addition of Inertia Delay an "F" may be added to delay numbers 41, 42, 51, 52, 61 and 62 only. + CR, CPP, CPR only available in these delays Notes: A A neon bulb is provided when specified for 120Vac and 250Vac operation. For operation at 120Vac a 33,000 ohm, 1/2 watt external resistor is required. At 250Vac a 100,000 ohm, 1 watt external resistor is required. CWhen ordering Paddle Handles, you may choose one item from each hardware group to add to 5th decision if such items are desired. For example, "-11ALCA" would indicate a bright nickel knurled nut, plus a vertical mount indicator, plus a locking ring, plus #8-32 screw terminal, straight with tabs. BA n LED with 750 ft. L @ 20mA is provided in the center of the handle. Maximum power dissipation @ 25C is 135mW. Continuous forward current is 20mA. Forward voltage, typical, is 1.6v at 20mA. Reverse current, typical, is 100mA @ 3.0 volts. An external resistor may be required to limit current to these values. DAll units except Rocker units will have (1) hex nut installed as standard hardware for the back of a panel. The choices in the fifth decision table are intended for the front or visible side of the panel and are offered for Paddle Handle configuration only. Push-Pull and Push-to-Reset configurations include one (1) panel nut and one (1) hex nut as standard hardware. E Switch only -- no current overload protection provided. 73 SNAPAK(R) Series - Decision Tables F. CCC Approval - If CCC is required on this product, please inform Sensata to have this product manufacturered in our China facility Fourth Decision Rocker Step 3: Choose Handle Markings Step 1: Choose Letter For Body Color Marked For Vertical Mount-After choice of 3 digit number in step 2 above. B Black R Black w/ Handle guard G Gray S Gray w/ Handle guard W T/R/PP/PR CR/CPP/CPR (SNAPAK(R)) 4 White T ON ON I OFF OFF O Add "CV" for Combined markings. Add "EV" for English markings. Example: "-W124EV" Add "IV" for Intil. markings. I O White w/ Handle guard Example: "W..." For White Rocker Body (Rocker Style) Marked For Horizontal Mount-After choice of 3 digit number in step 2 above. ON OFF Black 02 Red 06 White 07 Orange Example: "-W06" -01 -02 -03 -04 -05 -06 If you have chosen a handle from this table, your 4th Decison is now complete except for hardware options in 5th Decision Table. Push-Pull (PP, CPP and CPR) -XX -OA -OB LINE -OC No Button Markings desired (not available for CPP & CPR) Marked Buttons Available For These Amperages 5 0.1 1 10 2.5 15 5 17.5 7.5 20 5 Translucent White w/ Green Glow Neon (Note A) Transparent Amber w/Neon (Note A) Transparent Smoke Gray w/Neon (Note A) Transparent Smoke Gray w/Green Glow Neon (Note A) Transparent Smoke Gray w/Red LED (Note B) .25 0.5 .75 If you have chosen a handle from this table, your 4th Decison and your catalog part number are now complete (except if you require "-S" screw terminal option from the 5th Decision Table.) Transparent Smoke Gray w/4-8 Vdc Red LED Transparent Smoke Gray w/8-16 Vdc Red LED Transparent Smoke Gray w/Green LED (Note B) Transparent Smoke Gray w/4-8 Vdc Green LED Transparent Smoke Gray w/8-16 Vdc Green LED Push-to-Reset (PR) -XX Example: "-W124" No Button Markings Only If you have chosen a handle from this table, your 4th Decison and your catalog part number are now complete (except if you require "-S" screw terminal option from the 5th Decision Table.) If you prefer NO markings, then your handle decision is now complete. 5 Black Red Yellow Green Blue White LINE 188 189 Add "IH" for International markings. Paddle (T) Handle Color Clear w/Neon (Note A) Clear w/Green Glow Neon (Note A) Clear w/Red LED (Note B) Clear w/4-8 Vdc Red LED Clear w/8-16 Vdc Red LED Clear w/Green LED (Note B) Clear w/4-8 Vdc Green LED Clear w/8-16 Vdc Green LED Transparent Red w/Neon (Note A) Transparent Red w/Red LED (Note B) Transparent Red w/Red LED 4-8 Vdc Transparent Red w/Red LED 8-16 Vdc Translucent White w/Neon (Note A) LINE 161 162 171 181 182 183 184 185 187 I If you have chosen a handle from this table, your 4th Decison and your catalog part number are now complete (except if you require "-S" screw terminal option from the 5th Decision Table.) With Illumination Basic Handle Color & Light Choice (w/o Markings) 101 102 103 104 105 107 108 109 121 123 124 125 ON Add "EH" for English markings. Example "-W06EH" Add "CH" for Combined markings. 5 01 OFF I O Without Illumination Basic Handle Color (w/o Markings) O Step: 2: Choose Handle Combinations Fifth Decision Hardware & Accessories (Notes C and D) -00 -10 -11 -20 -21 -31 Group I No Outer Hardware Desired Black Knurled Nut Bright Nickel Knurled Nut Black Panel Dress Nut Bright Nickel Panel Dress Nut Bright Nickel Hex Nut Group III -L Locking Ring Group II (Indicator Plate) Group V (Screw Terminal Options) -A Vertical Mount (Off/On & O/I)* -C SAE 8-32, Upturned Lugs (Tabs) Straight Terminal -F M4, Upturned Lugs (Tabs) Straight Terminal -B Horizontal Mount (Off/On & O/I)* -D SAE 8-32, Bus-Type Connect (Flat) Straight Terminal -H M4, Bus-Type Connect (Flat) Straight Terminal Please select a screw terminal option if you selected "S" in Decision 1 *Selection of A or B Indicator Plate required for VDE and CCC. V = VDE, TUV and CCC Approved T = TUV Approved The shaded areas denote VDE, CCC (if applicable) and CE compliant options. The V will be added to any part number formed entirely from shaded decisions. If non-shaded areas are selected, the unit will not be VDE approved, nor CE compliant, but other approvals still apply. This approval requires the addition of a T at the end of the PN. The unit will not be VDE approved. If non-shaded areas are selected, the unit will not be TUV approved, with the exception being you can select screw terminals and screw terminal options (1st & 5th decision) as these options are TUV approved.