NVTFS5820NL Power MOSFET 60 V, 11.5 mW, Single N-Channel, m8FL Features * * * * * Small Footprint (3.3x3.3 mm) for Compact Design Low RDS(on) to Minimize Conduction Losses Low QG and Capacitance to Minimize Driver Losses AEC-Q101 Qualified These are Pb-Free Devices* http://onsemi.com V(BR)DSS Symbol Value Unit Drain-to-Source Voltage VDSS 60 V Gate-to-Source Voltage VGS "20 V ID 29 A Continuous Drain Current RYJ-mb (Notes 1, 2, 3, 4) Power Dissipation RYJ-mb (Notes 1, 2, 3) Continuous Drain Current RqJA (Notes 1 & 3, 4) Power Dissipation RqJA (Notes 1, 3) Tmb = 25C Steady State Tmb = 100C Tmb = 25C Steady State PD Pulsed Drain Current Current limited by package (Note 4) TA = 25C Operating Junction and Storage Temperature Source Current (Body Diode) Single Pulse Drain-to-Source Avalanche Energy (TJ = 25C, VDD = 50 V, VGS = 10 V, IL(pk) = 37 A, L = 0.1 mH, RG = 25 W) Lead Temperature for Soldering Purposes (1/8 from case for 10 s) D G 10 ID A 11 S 8.0 PD MARKING DIAGRAM W 3.2 TA = 100C TA = 25C, tp = 10 ms N-Channel W 21 TA = 100C TA = 25C 1.6 1 S S S G 1 IDM 247 A IDmaxPkg 70 A TJ, Tstg -55 to 175 C IS 17 A EAS 48 mJ TL 260 C WDFN8 (m8FL) CASE 511AB 5820 A Y WW G Junction-to-Ambient - Steady State (Note 3) Symbol Value Unit RYJ-mb 7.3 C/W RqJA 47 1. The entire application environment impacts the thermal resistance values shown, they are not constants and are only valid for the particular conditions noted. 2. Psi (Y) is used as required per JESD51-12 for packages in which substantially less than 100% of the heat flows to single case surface. 3. Surface-mounted on FR4 board using a 650 mm2, 2 oz. Cu pad. 4. Maximum current for pulses as long as 1 second is higher but is dependent on pulse duration and duty cycle. (c) Semiconductor Components Industries, LLC, 2011 November, 2011 - Rev. 2 D D D D = Specific Device Code = Assembly Location = Year = Work Week = Pb-Free Package ORDERING INFORMATION Device Package Shipping NVTFS5820NLTAG WDFN8 (Pb-Free) 1500/Tape & Reel NVTFS5820NLTWG WDFN8 (Pb-Free) 5000/Tape & Reel THERMAL RESISTANCE MAXIMUM RATINGS (Note 1) Junction-to-Mounting Board (top) - Steady State (Note 2, 3) 5820 AYWWG G (Note: Microdot may be in either location) Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Parameter 29 A 15 mW @ 4.5 V 20 Tmb = 100C TA = 25C ID MAX 11.5 mW @ 10 V 60 V MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Parameter RDS(on) MAX 1 For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. Publication Order Number: NVTFS5820NL/D NVTFS5820NL ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise specified) Parameter Symbol Test Condition Min Drain-to-Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA 60 Drain-to-Source Breakdown Voltage Temperature Coefficient V(BR)DSS/TJ Typ Max Unit OFF CHARACTERISTICS Zero Gate Voltage Drain Current 57 IDSS Gate-to-Source Leakage Current V VGS = 0 V, VDS = 60 V mV/C TJ = 25C 1.0 TJ = 125C 10 IGSS VDS = 0 V, VGS = 20 V VGS(TH) VGS = VDS, ID = 250 mA 100 mA nA ON CHARACTERISTICS (Note 5) Gate Threshold Voltage Negative Threshold Temperature Coefficient VGS(TH)/TJ Drain-to-Source On Resistance RDS(on) Forward Transconductance 1.5 2.3 6.2 gFS VGS = 10 V ID = 8.7 A 10.1 11.5 VGS = 4.5 V ID = 7.3 A 13.0 15 VDS = 5 V, ID = 10 A V mV/C mW 24.6 S 1462 pF CHARGES, CAPACITANCES AND GATE RESISTANCE Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Total Gate Charge QG(TOT) VGS = 0 V, f = 1.0 MHz, VDS = 25 V 150 96 VGS = 10 V, VDS = 48 V, ID = 10 A 28 VGS = 4.5 V, VDS = 48 V, ID = 10 A 15 nC Threshold Gate Charge QG(TH) 1 Gate-to-Source Charge QGS Gate-to-Drain Charge QGD Plateau Voltage VGP 3 V Gate Resistance RG 0.62 W td(on) 10 ns VGS = 4.5 V, VDS = 48 V, ID = 10 A 4 8 SWITCHING CHARACTERISTICS (Note 6) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time tr td(off) VGS = 4.5 V, VDS = 48 V, ID = 10 A, RG = 2.5 W tf 28 19 22 DRAIN-SOURCE DIODE CHARACTERISTICS Forward Diode Voltage Reverse Recovery Time VSD TJ = 25C 0.79 TJ = 125C 0.65 tRR Charge Time ta Discharge Time tb Reverse Recovery Charge VGS = 0 V, IS = 10 A 19 VGS = 0 V, dIS/dt = 100 A/ms, IS = 10 A QRR http://onsemi.com 2 V ns 13 6 15 5. Pulse Test: pulse width v 300 ms, duty cycle v 2%. 6. Switching characteristics are independent of operating junction temperatures. 1.2 nC NVTFS5820NL TYPICAL CHARACTERISTICS 50 3.6 V 40 3.4 V 30 60 50 40 30 20 3.2 V 10 3.0 V 10 0 2.8 V 0 1 2 3 4 5 1 TJ = -55C 2 3 4 5 Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics 0.025 0.020 0.015 0.010 2 4 6 8 10 12 VGS, GATE-TO-SOURCE VOLTAGE (V) 0.016 TJ = 25C 0.014 VGS = 4.5 V 0.012 VGS = 10 V 0.010 0.008 5 10 15 20 25 30 35 40 ID, DRAIN CURRENT (A) Figure 3. On-Resistance vs. Gate-to-Source Voltage Figure 4. On-Resistance vs. Drain Current and Gate Voltage 2.3 1.9 TJ = 125C VGS, GATE-TO-SOURCE VOLTAGE (V) ID = 10 A TJ = 25C 2.1 TJ = 25C 20 VDS, DRAIN-TO-SOURCE VOLTAGE (V) 0.030 0.005 VDS 10 V 70 100,000 VGS = 0 V VGS = 10 V ID = 10 A IDSS, LEAKAGE (nA) RDS(on), DRAIN-TO-SOURCE RESISTANCE (W) TJ = 25C 3.8 V 60 0 RDS(on), DRAIN-TO-SOURCE RESISTANCE (NORMALIZED) 4.0 V RDS(on), DRAIN-TO-SOURCE RESISTANCE (W) ID, DRAIN CURRENT (A) 70 80 VGS = 5 V 10 V ID, DRAIN CURRENT (A) 80 10,000 1.7 1.5 1.3 1.1 0.9 TJ = 150C 1,000 TJ = 125C 0.7 0.5 -50 -25 0 25 50 75 100 125 150 175 100 10 20 30 40 50 TJ, JUNCTION TEMPERATURE (C) VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 5. On-Resistance Variation with Temperature Figure 6. Drain-to-Source Leakage Current vs. Voltage http://onsemi.com 3 60 NVTFS5820NL TYPICAL CHARACTERISTICS 10 VGS = 0 V TJ = 25C 1600 C, CAPACITANCE (pF) VGS, GATE-TO-SOURCE VOLTAGE (V) 1800 1400 Ciss 1200 1000 800 600 400 Coss 200 0 Crss 0 10 20 30 40 50 60 IS, SOURCE CURRENT (A) t, TIME (ns) 2 0 VDS = 48 V ID = 10 A TJ = 25C 0 5 10 15 20 25 Qg, TOTAL GATE CHARGE (nC) td(off) tf td(on) 10 1 10 100 30 30 VGS = 0 V TJ = 25C 20 10 0 0.5 0.6 0.7 0.8 0.9 RG, GATE RESISTANCE (W) VSD, SOURCE-TO-DRAIN VOLTAGE (V) Figure 9. Resistive Switching Time Variation vs. Gate Resistance Figure 10. Diode Forward Voltage vs. Current 1000 1.0 60 VGS = 10 V Single Pulse TC = 25C 100 ms EAS, SINGLE PULSE DRAIN-TO- SOURCE AVALANCHE ENERGY (mJ) ID, DRAIN CURRENT (A) Qgd Qgs 40 tr 10 ms 1 ms 10 10 ms 0.1 4 Figure 8. Gate-to-Source Voltage vs. Total Charge 100 1 6 DRAIN-TO-SOURCE VOLTAGE (V) VDD = 48 V ID = 10 A VGS = 4.5 V 100 8 Figure 7. Capacitance Variation 1000 1 QT RDS(on) Limit Thermal Limit Package Limit 0.1 dc 1 10 VDS, DRAISN VOLTAGE (V) 100 ID = 37 A 50 40 30 20 10 0 25 50 75 100 125 150 TJ, STARTING JUNCTION TEMPERATURE (C) Figure 11. Maximum Rated Forward Biased Safe Operating Area Figure 12. Maximum Avalanche Energy vs. Starting Junction Temperature http://onsemi.com 4 175 NVTFS5820NL RqJ(t) (C/W) EFFECTIVE TRANSIENT THERMAL RESISTANCE TYPICAL CHARACTERISTICS 10 Duty Cycle = 0.5 0.2 1 0.1 0.05 0.02 0.1 0.01 Single Pulse 0.01 0.000001 0.00001 0.0001 0.001 0.01 0.1 PULSE TIME (sec) Figure 13. Thermal Response http://onsemi.com 5 1 10 100 1000 NVTFS5820NL PACKAGE DIMENSIONS WDFN8 3.3x3.3, 0.65P CASE 511AB ISSUE C 2X NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION D1 AND E1 DO NOT INCLUDE MOLD FLASH PROTRUSIONS OR GATE BURRS. 0.20 C D A D1 B 2X 0.20 C 8 7 6 5 4X E1 E q c 1 2 3 4 A1 TOP VIEW 0.10 C A C 6X e 0.10 C SIDE VIEW DETAIL A SEATING PLANE DETAIL A q 8X 0.10 C A B 0.05 L 8X e/2 0.42 14 0.116 0.078 0.116 0.058 0.009 0.012 0.025 0.012 0.002 0.055 0 INCHES NOM 0.030 *** 0.012 0.008 0.130 BSC 0.120 0.083 0.130 BSC 0.120 0.063 0.012 0.026 BSC 0.016 *** 0.017 0.005 0.059 *** MAX 0.031 0.002 0.016 0.010 0.124 0.088 0.124 0.068 0.016 0.020 *** 0.022 0.008 0.063 12 4X 0.66 M E3 8 G MIN 0.028 0.000 0.009 0.006 0.65 PITCH PACKAGE OUTLINE K E2 MILLIMETERS MIN NOM MAX 0.70 0.75 0.80 0.00 *** 0.05 0.40 0.23 0.30 0.25 0.15 0.20 3.30 BSC 3.15 2.95 3.05 1.98 2.24 2.11 3.30 BSC 2.95 3.15 3.05 1.73 1.47 1.60 0.23 0.30 0.40 0.65 BSC 0.30 0.41 0.51 0.64 *** *** 0.30 0.43 0.56 0.06 0.13 0.20 1.60 1.40 1.50 0 *** 12 SOLDERING FOOTPRINT* C 4X DIM A A1 b c D D1 D2 E E1 E2 E3 e G K L L1 M 5 D2 BOTTOM VIEW 3.60 L1 0.75 2.30 0.57 0.47 2.37 3.46 DIMENSION: MILLIMETERS *For additional information on our Pb *Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NVTFS5820NL/D