Type SH 105 C Radial Leaded Aluminum Electrolytic Capacitors 2000 Hour Long Life, Aluminum Electrolytic OR LL MA SH Type SH is a radial leaded aluminum electrolytic capacitor with a +105 C, 2000 hour long life rating. The SH is a high reliability product and is ideal for high quality applications that require long life in high temperatures environments. Y Highlights +105 C 2000 hours - long life High reliability Available in T&R and ammo pack E * * * * Specifications BS O Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE). 1.0 to 4700 F 6.3 to 450 Vdc 20% -40 C to +105 C (-25 C for 160 to 450 Vdc) After 2 minutes, 25 C at rated voltage 6.3 to 100 Vdc I = .01CV + 3 A Max 160 Vdc after voltage applied for 3 minutes I = .03CV + 10 A Max C = Capacitance in (F) V = Rated voltage I = Leakage current in A LE T Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature Range: DC Leakage Current: Dissipation Factor @ 120 Hz, +25 C: WV (V) 6.3 10 16 25 35 50 63 100 160-250 400-450 DF(%) 26 22 18 16 14 12 10 10 15 20 Above 1000 F, the value of DF (%) is increased 2% for every additional 1000 F O Ripple Multipliers for Frequency and Temperature: Rated Ripple Multipliers WVDC 60Hz 120Hz 1kHz 10kHz 6 to 25 0.80 1.0 1.1 1.2 35 to 100 0.75 1.0 1.3 1.4 160 to 450 0.70 1.0 1.4 1.6 Ambient Ripple Temperature Multiplier +105 C 1.00 +85 C 1.50 +70 C 1.80 Load Life Test: Apply Rated WVDC for 2000 hours at +105 C Shelf Life: Capacitance change within 20% of initial value DF not to exceed 200% of initial requirement DC Leakage current meets initial limits 1000 hrs @105 C with no voltage applied Cap change within 20% of initial value DF 200% of initial requirements DC leakage current meets initial requirement CDE Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8561 * Fax: (508)996-3830 * www.cde.com Type SH 105 C Radial Leaded Aluminum Electrolytic Capacitors Outline Drawing Outline Dimensions (Millimeters) PVC Sleeve S 0.5 d 0.05 + + L 5 15 Min. Case vented on diameters 6.3 and greater D Vinyl sleeve adds .5 Max. to diameter and 2.0 Max. to length Part Numbering System 100 100 Capacitance Rated Capacitance Tolerance (F) SH S T Lead Voltage Packaging Configuration (%) (Vdc) 1R0 = 1 K = 10 6R3 = 6.3 A = Tape & Ammo 1 = Lead cut 100 = 10 M = 20 010 = 10 E = Different Characteristic 2 = Lead form 101 = 100 LE T Type M E SH 100 = 100 R = Tape & Reel 102 = 1000 4 = Lead crimp & cut (form) S = Standard BS O Temperature Characteristics T = Standard 40 30 100 20 %C 50 47F 100V 10 %DF 0 100F 160V -10 47F 100V 10 5 100F 160V -20 -30 1 -40 0 40 80 Temperature C 120 0 40 80 Temperature C 120 Dissipation Factor Change O Capacitance Change Ratio -40 Load Life Characteristics 100 10 %C 20 0 100F 160V -10 47F 100V -20 0 500 1000 1500 Time In Hours 2000 Capacitance Change Ratio 50 %DF 15 470F 25V 10 5 100F 160V 0 500 1000 1500 Time In Hours 2000 Dissipation Factor Change %LC 10 5 100F 160V 47F 100V 1 0 500 1000 1500 Time In Hours 2000 Leakage Current Change CDE Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8561 * Fax: (508)996-3830 * www.cde.com Type SH 105 C Radial Leaded Aluminum Electrolytic Capacitors Ratings Capacitance (uF) Catalog Part Number Max ESR Ripple Current 120 120 Hz/ Hz/+25C +105C (ohms) (ma) Size in. (mm) Diameter (D) Length (L) Lead Space (S) Lead dia. (d) 6.3 Vdc (8 Volts Surge) SH470M6R3ST 7.34 65 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) SH101M6R3ST 3.45 100 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 220 SH221M6R3ST 1.57 165 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 330 SH331M6R3ST 1.04 200 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 470 SH471M6R3ST 0.73 280 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 1000 SH102M6R3ST 0.34 470 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) E 47 100 2200 SH222M6R3ST 0.17 930 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 3300 SH332M6R3ST 0.12 1100 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 4700 SH472M6R3ST 0.09 1320 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8) 47 SH470M010ST 6.21 0.020 (0.5) 100 SH101M010ST 2.92 220 SH221M010ST 1.33 330 SH331M010ST 0.88 470 SH471M010ST 0.62 LE T 10 Vdc (13 Volts Surge) 75 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 110 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 180 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 255 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 305 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) SH102M010ST 0.29 SH222M010ST 0.14 570 0.394 (10.0) 0.630 (16.0) 0.197 (5.0) 0.024 (0.6) 1010 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 3300 SH332M010ST 0.10 4700 SH472M010ST 0.08 1220 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6) 1410 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8) 33 SH330M016ST 7.23 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 47 SH470M016ST 5.08 85 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 100 SH101M016ST 2.39 135 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) BS O 1000 2200 16 Vdc (20 Volts Surge) 70 0.197 (5.0) 220 SH221M016ST 1.09 235 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 330 SH331M016ST 0.72 285 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) SH471M016ST 0.51 395 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) SH102M016ST 0.24 700 0.394 (10.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 2200 SH222M016ST 0.12 1150 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6) 3300 SH332M016ST 0.09 1350 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8) 4700 SH472M016ST 0.07 1560 0.630 (16.0) 1.26 (32.0) 0.295 (7.5) 0.031 (0.8) O 470 1000 25 Vdc (32 Volts Surge) 10 SH100M025ST 21.22 39 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 22 SH220M025ST 9.65 60 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 33 SH330M025ST 6.43 75 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 47 SH470M025ST 4.52 90 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 100 SH101M025ST 2.12 145 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 220 SH221M025ST 0.96 250 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) 330 SH331M025ST 0.64 355 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) 470 SH471M025ST 0.45 470 0.394 (10.0) 0.630 (16.0) 0.197 (5.0) 0.024 (0.6) 1000 SH102M025ST 0.21 855 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 2200 SH222M025ST 0.11 1230 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8) 3300 SH332M025ST 0.08 1450 0.630 (16.0) 1.26 (32.0) 0.295 (7.5) 0.031 (0.8) 4700 SH472M025ST 0.06 1690 0.709 (18.0) 1.40 (36.0) 0.295 (7.5) 0.031 (0.8) CDE Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8561 * Fax: (508)996-3830 * www.cde.com Type SH 105 C Radial Leaded Aluminum Electrolytic Capacitors Ratings Capacitance (uF) Catalog Part Number Max ESR Ripple Current 120 120 Hz/ Hz/+25C +105C (ohms) (ma) Size in. (mm) Diameter (D) Length (L) Lead Space (S) Lead dia. (d) 35 Vdc (44 Volts Surge) 10 SH100M035ST 18.57 40 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 22 SH220M035ST 8.44 65 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 33 SH330M035ST 5.63 85 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 47 SH470M035ST 3.95 115 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 100 SH101M035ST 1.86 190 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) SH221M035ST 0.84 315 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) SH331M035ST 0.56 440 0.394 (10.0) 0.630 (16.0) 0.197 (5.0) 0.024 (0.6) (20.0) 0.197 (5.0) 0.024 (0.6) (25.0) 0.197 (5.0) 0.024 (0.6) E 220 330 SH471M035ST 0.40 580 0.512 (13.0) 0.787 SH102M035ST 0.19 995 0.512 (13.0) 0.984 2200 SH222M035ST 0.10 1450 0.630 (16.0) 1.26 (32.0) 0.295 (7.5) 0.031 (0.8) 3300 SH332M035ST 0.07 1660 0.709 (18.0) 1.40 (36.0) 0.295 (7.5) 0.031 (0.8) 1 SH010M050ST 159.15 2.2 SH2R2M050ST 72.34 3.3 SH3R3M050ST 48.23 4.7 SH4R7M050ST 33.86 10 SH100M050ST 15.92 22 SH220M050ST 7.23 33 SH330M050ST 4.82 LE T 470 1000 50 Vdc (63 Volts Surge) 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 18 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 25 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 30 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 50 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 75 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 105 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) BS O 12 47 SH470M050ST 3.39 125 0.315 (8.0) 100 SH101M050ST 1.59 210 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) 220 SH221M050ST 0.72 400 0.394 (10.0) 0.630 (16.0) 0.197 (5.0) 0.024 (0.6) 330 SH331M050ST 0.48 535 0.394 (10.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 470 SH471M050ST 0.34 730 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 1000 SH102M050ST 0.16 1110 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8) 2200 SH222M050ST 0.08 1530 0.709 (18.0) 1.40 (36.0) 0.295 (7.5) 0.031 (0.8) 63 Vdc (79 Volts Surge) 4.7 SH4R7M063ST 28.22 34 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 10 SH100M063ST 13.26 55 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 22 SH220M063ST 90 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) SH330M063ST 4.02 110 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 47 SH470M063ST 2.82 155 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 100 SH101M063ST 1.33 260 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) O 6.03 33 220 SH221M063ST 0.60 460 0.394 (10.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 330 SH331M063ST 0.40 650 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 470 SH471M063ST 0.28 800 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6) 1000 SH102M063ST 0.13 1200 0.630 (16.0) 1.26 (32.0) 0.295 (7.5) 0.031 (0.8) 100 Vdc (125 Volts Surge) 1 SH010M100ST 132.63 15 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 2.2 SH2R2M100ST 60.29 22 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 3.3 SH3R3M100ST 40.19 29 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 4.7 SH4R7M100ST 28.22 37 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 10 SH100M100ST 13.26 65 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 22 SH220M100ST 6.03 115 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) CDE Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8561 * Fax: (508)996-3830 * www.cde.com Type SH 105 C Radial Leaded Aluminum Electrolytic Capacitors Ratings Capacitance (uF) Catalog Part Number 33 SH330M100ST Max ESR Ripple Current 120 120 Hz/ Hz/+25C +105C (ohms) (ma) Size in. (mm) Diameter (D) Length (L) Lead Space (S) Lead dia. (d) 100 Vdc (125 Volts Surge) 4.02 160 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) 47 SH470M100ST 2.82 210 0.394 (10.0) 0.630 (16.0) 0.197 (5.0) 0.024 (0.6) 100 SH101M100ST 1.33 385 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) SH221M100ST 0.60 590 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8) SH331M100ST 0.40 720 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8) 470 SH471M100ST 0.28 875 0.630 (16.0) 1.26 (32.0) 0.295 (7.5) 0.031 (0.8) *160 Vdc (200 Volts Surge) E 220 330 SH010M160ST 198.94 17 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) SH2R2M160ST 90.43 25 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 3.3 SH3R3M160ST 60.29 36 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 4.7 SH4R7M160ST 42.33 43 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 10 SH100M160ST 19.89 22 SH220M160ST 9.04 33 SH330M160ST 6.03 47 SH470M160ST 4.23 100 SH101M160ST 1.99 LE T 1 2.2 70 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) 130 0.394 (10.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 180 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 270 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6) 330 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8) *200 Vdc (250 Volts Surge) SH010M200ST 198.94 SH2R2M200ST 90.43 17 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 25 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) BS O 1 2.2 3.3 SH3R3M200ST 60.29 36 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 4.7 SH4R7M200ST 42.33 50 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) 10 SH100M200ST 19.89 80 0.394 (10.0) 0.630 (16.0) 0.197 (5.0) 0.024 (0.6) 22 SH220M200ST 9.04 140 0.394 (10.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 33 SH330M200ST 6.03 190 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6) 47 SH470M200ST 4.23 220 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6) 100 SH101M200ST 1.99 335 0.630 (16.0) 1.26 (32.0) 0.295 (7.5) 0.031 (0.8) 1 SH010M250ST 198.94 17 0.248 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 2.2 SH2R2M250ST 90.43 29 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 3.3 SH3R3M250ST 60.29 42 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) 4.7 SH4R7M250ST 42.33 50 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) 10 SH100M250ST 19.89 88 0.394 (10.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) O *250 Vdc (300 Volts Surge) (6.3) 22 SH220M250ST 9.04 155 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6) 33 SH330M250ST 6.03 190 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6) 47 SH470M250ST 4.23 230 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8) 100 SH101M250ST 1.99 340 0.709 (18.0) 1.40 (36.0) 0.295 (7.5) 0.031 (0.8) 22 SH220M400ST 12.06 110 0.984 (25.0) 0.295 (7.5) 0.031 (0.8) 10 SH100M450ST 26.53 0.984 (25.0) 0.197 (5.0) 0.024 (0.6) *400 Vdc (450 Volts Surge) 0.630 (16.0) *450 Vdc (500 Volts Surge) 80 0.512 (13.0) * Over 160 Vdc the ripple is measured at 85 C CDE Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8561 * Fax: (508)996-3830 * www.cde.com Type SH 105 C Radial Leaded Aluminum Electrolytic Capacitors Taping & Packaging Fig. 1 - Formed Taping P2 h P D P2 h P D A P1 H Fig. 2 - Straight Taping (5, 6.3, 8) F H1 P1 H A F t H0 t W0 W E d P0 W0 W D0 P2 F A P1 H h P D A P1 H LE T h P D D0 Fig. 4- Straight Taping (16, 18) Fig. 3- Straight Taping (Under 10, 12, 13) P2 d P0 F t W0 W W0 W BS O d P0 t D0 d P0 D0 Standard Lead Spacing of Taped Components is 5mm Other Lead Spacing is Available by Special Order Code D d Item P P0 P1 P2 F W W0 H H0 D0 t ih 0.5 Min. 0.75 0.5 0.2 0.2 Max. 1.0 0.05 1.0 0.2 0.7 1.3 4 ~ 6.3 7.0 0.45 12.7 12.7 3.85 6.35 +0.8 -0.2 5.0 18.0 12.5 18.5 16.0 4.0 0.7 2.0 5~8 12.5 0.5 12.7 12.7 3.85 6.35 5.0 18.0 12.5 18.5 16.0 4.0 0.7 2.0 5, 6.3 12.5 0.5 12.7 12.7 5.1 6.35 2.5 18.0 12.5 18.5 4.0 0.7 2.0 8 12.5 0.5 12.7 12.7 4.6 6.35 3.5 18.0 12.5 18.5 4.0 0.7 2.0 10 12, 13 16, 18 21.0 26.0 26.0 0.6 0.6 0.8 12.7 15.0 30.0 12.7 15.0 15.0 3.85 5.0 3.75 6.35 7.5 7.5 5.0 5.0 7.5 18.0 18.0 18.0 12.5 12.5 12.5 18.5 18.5 18.0 4.0 4.0 4.0 0.7 0.7 0.7 2.0 2.0 2.0 0.5 O Tolerance A Capacitor Diameter D (mm) A5 B Max C3 4 5 6.3 8 10 (12 L) 10 (16 L) 10 (20 L) 12, 13 16 250 250 290 250 290 350 340 340 340 340 340 340 340 340 340 340 340 340 54 54 54 54 54 59 71 71 71 Ammo Pack Box Dimensions (mm) Quantity Per Ammo Pack Box 3000 2,000 2,000 1,000 600 600 600 400 300 1 2 3 4 Tape And Reel Quantities Case Diameter Reel Reel Qty. Width (Pcs.) D (mm) Ammo Pack A C Fig. B Ammo Pack boxes are shipped 5 to the outer packing carton 4 5 6 8 10 (12L) 10 (16L) 12, 13 16 44 44 44 44 44 50 - 1500 1200 1000 800 600 600 - CDE Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8561 * Fax: (508)996-3830 * www.cde.com Type SH 105 C Radial Leaded Aluminum Electrolytic Capacitors O BS O LE T E Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the "Information") in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements ("Cornell Dubilier") has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter - and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8561 * Fax: (508)996-3830 * www.cde.com