CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type SH 105 ºC Radial Leaded Aluminum Electrolytic Capacitors
2000 Hour Long Life, Aluminum Electrolytic
Type SH is a radial leaded aluminum electrolytic ca-
pacitor with a +105 ºC, 2000 hour long life rating. The
SH is a high reliability product and is ideal for high
quality applications that require long life in high tem-
peratures environments.
Highlights
• +105 ºC
• 2000 hours - long life
• High reliability
• Available in T&R and ammo pack
Specications
Capacitance Range:
Voltage Range:
Capacitance Tolerance:
Operating Temperature Range:
DC Leakage Current:
Dissipation Factor @ 120 Hz, +25 ºC:
Ripple Multipliers for Frequency and Temperature:
Load Life Test:
Shelf Life:
1.0 to 4700 µF
6.3 to 450 Vdc
±20%
–40 ºC to +105 ºC (–25 ºC for 160 to 450 Vdc)
After 2 minutes, 25 ºC at rated voltage
6.3 to 100 Vdc
I = .01CV + 3 µA Max
≥ 160 Vdc after voltage applied for 3 minutes
I = .03CV + 10 µA Max
C = Capacitance in (µF)
V = Rated voltage
I = Leakage current in µA
WV (V) 6.3 10 16 25 35 50 63 100 160-250 400-450
DF(%) 26 22 18 16 14 12 10 10 15 20
Rated Ripple Multipliers
WVDC 60Hz 120Hz 1kHz 10kHz
6 to 25 0.80 1.0 1.1 1.2
35 to 100 0.75 1.0 1.3 1.4
160 to 450 0.70 1.0 1.4 1.6
Ambient Ripple
Temperature Multiplier
+105 ºC 1.00
+85 ºC 1.50
+70 ºC 1.80
Apply Rated WVDC for 2000 hours at +105 ºC
Capacitance change within 20% of initial value
DF not to exceed 200% of initial requirement
DC Leakage current meets initial limits
1000 hrs @105 ºC with no voltage applied
Cap change within 20% of initial value
DF ≤ 200% of initial requirements
DC leakage current meets initial requirement
Complies with the EU Directive
2002/95/EC requirement restricting
the use of Lead (Pb), Mercury (Hg),
Cadmium (Cd), Hexavalent chromium
(Cr(VI)), PolyBrominated Biphenyls
(PBB) and PolyBrominated Diphenyl
Ethers (PBDE).
Above 1000 µF, the value of DF (%) is increased 2% for every additional 1000 µF
M
ALLOR
Y
SH
OBSOLETE
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type SH 105 ºC Radial Leaded Aluminum Electrolytic Capacitors
Outline Drawing
Temperature Characteristics
Load Life Characteristics
Part Numbering System
SH 100 M 100 S T
Capacitance Rated Lead
Type Capacitance Tolerance Voltage Packaging Conguration
(µF) (%) (Vdc)
SH 1R0 = 1 K = ±10 6R3 = 6.3 A = Tape & Ammo 1 = Lead cut
100 = 10 M = ±20 010 = 10 E = Different Characteristic 2 = Lead form
101 = 100 100 = 100 R = Tape & Reel 4 = Lead crimp & cut (form)
102 = 1000 S = Standard T = Standard
5
-40 0
10
40 80
%C
Temperature C
Capacitance Change Ratio
20
0
-10
-20
47F 100V
100F 160V
Temperature C
Dissipation Factor Change
-40 0 40 80
%DF
100
50
10
5
1
100F 160V
47F 100V
-30
30
40
120 120
5
0 500
10
1000 1500
%C
Time In Hours
Capacitance Change Ratio
0
-10
-20
Time In Hours
Leakage Current Change
0 500 1000 1500
%LC
100
50
10
1
100F 160V
47F 100V
2000
2000
0 500
20
1000 1500
%DF
Time In Hours
Dissipation Factor Change
15
10
5 100F 160V
470F 25V
2000
47F 100V
100F 160V
Vinyl sleeve adds .5 Max. to diameter
and 2.0 Max. to length
Outline Dimensions
(Millimeters)
Case vented on
diameters 6.3 and greater
L
S 0.5
15 Min. D
5
+
PVC Sleeve
d 0.05 +
-
OBSOLETE
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type SH 105 ºC Radial Leaded Aluminum Electrolytic Capacitors
Ratings
SH 100 M 100 S T
Capacitance Rated Lead
Type Capacitance Tolerance Voltage Packaging Conguration
(µF) (%) (Vdc)
SH 1R0 = 1 K = ±10 6R3 = 6.3 A = Tape & Ammo 1 = Lead cut
100 = 10 M = ±20 010 = 10 E = Different Characteristic 2 = Lead form
101 = 100 100 = 100 R = Tape & Reel 4 = Lead crimp & cut (form)
102 = 1000 S = Standard T = Standard
Capacitance
(uF)
Catalog
Part Number
ESR
120
Hz/+25°C
(ohms)
Max
Ripple Current
120 Hz/
+105°C
(ma)
Size in. (mm)
Diameter
(D)
Length
(L)
Lead Space
(S)
Lead dia.
(d)
6.3 Vdc (8 Volts Surge)
47 SH470M6R3ST 7.34 65 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
100 SH101M6R3ST 3.45 100 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
220 SH221M6R3ST 1.57 165 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5)
330 SH331M6R3ST 1.04 200 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6)
470 SH471M6R3ST 0.73 280 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6)
1000 SH102M6R3ST 0.34 470 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6)
2200 SH222M6R3ST 0.17 930 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6)
3300 SH332M6R3ST 0.12 1100 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6)
4700 SH472M6R3ST 0.09 1320 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8)
10 Vdc (13 Volts Surge)
47 SH470M010ST 6.21 75 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
100 SH101M010ST 2.92 110 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
220 SH221M010ST 1.33 180 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5)
330 SH331M010ST 0.88 255 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6)
470 SH471M010ST 0.62 305 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6)
1000 SH102M010ST 0.29 570 0.394 (10.0) 0.630 (16.0) 0.197 (5.0) 0.024 (0.6)
2200 SH222M010ST 0.14 1010 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6)
3300 SH332M010ST 0.10 1220 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6)
4700 SH472M010ST 0.08 1410 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8)
16 Vdc (20 Volts Surge)
33 SH330M016ST 7.23 70 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
47 SH470M016ST 5.08 85 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
100 SH101M016ST 2.39 135 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5)
220 SH221M016ST 1.09 235 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6)
330 SH331M016ST 0.72 285 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6)
470 SH471M016ST 0.51 395 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6)
1000 SH102M016ST 0.24 700 0.394 (10.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6)
2200 SH222M016ST 0.12 1150 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6)
3300 SH332M016ST 0.09 1350 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8)
4700 SH472M016ST 0.07 1560 0.630 (16.0) 1.26 (32.0) 0.295 (7.5) 0.031 (0.8)
25 Vdc (32 Volts Surge)
10 SH100M025ST 21.22 39 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
22 SH220M025ST 9.65 60 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
33 SH330M025ST 6.43 75 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
47 SH470M025ST 4.52 90 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
100 SH101M025ST 2.12 145 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5)
220 SH221M025ST 0.96 250 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6)
330 SH331M025ST 0.64 355 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6)
470 SH471M025ST 0.45 470 0.394 (10.0) 0.630 (16.0) 0.197 (5.0) 0.024 (0.6)
1000 SH102M025ST 0.21 855 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6)
2200 SH222M025ST 0.11 1230 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8)
3300 SH332M025ST 0.08 1450 0.630 (16.0) 1.26 (32.0) 0.295 (7.5) 0.031 (0.8)
4700 SH472M025ST 0.06 1690 0.709 (18.0) 1.40 (36.0) 0.295 (7.5) 0.031 (0.8)
OBSOLETE
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type SH 105 ºC Radial Leaded Aluminum Electrolytic Capacitors
Ratings
Capacitance
(uF)
Catalog
Part Number
ESR
120
Hz/+25°C
(ohms)
Max
Ripple Current
120 Hz/
+105°C
(ma)
Size in. (mm)
Diameter
(D)
Length
(L)
Lead Space
(S)
Lead dia.
(d)
35 Vdc (44 Volts Surge)
10 SH100M035ST 18.57 40 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
22 SH220M035ST 8.44 65 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5)
33 SH330M035ST 5.63 85 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5)
47 SH470M035ST 3.95 115 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5)
100 SH101M035ST 1.86 190 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6)
220 SH221M035ST 0.84 315 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6)
330 SH331M035ST 0.56 440 0.394 (10.0) 0.630 (16.0) 0.197 (5.0) 0.024 (0.6)
470 SH471M035ST 0.40 580 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6)
1000 SH102M035ST 0.19 995 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6)
2200 SH222M035ST 0.10 1450 0.630 (16.0) 1.26 (32.0) 0.295 (7.5) 0.031 (0.8)
3300 SH332M035ST 0.07 1660 0.709 (18.0) 1.40 (36.0) 0.295 (7.5) 0.031 (0.8)
50 Vdc (63 Volts Surge)
1 SH010M050ST 159.15 12 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
2.2 SH2R2M050ST 72.34 18 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
3.3 SH3R3M050ST 48.23 25 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
4.7 SH4R7M050ST 33.86 30 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
10 SH100M050ST 15.92 50 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
22 SH220M050ST 7.23 75 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
33 SH330M050ST 4.82 105 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5)
47 SH470M050ST 3.39 125 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6)
100 SH101M050ST 1.59 210 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6)
220 SH221M050ST 0.72 400 0.394 (10.0) 0.630 (16.0) 0.197 (5.0) 0.024 (0.6)
330 SH331M050ST 0.48 535 0.394 (10.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6)
470 SH471M050ST 0.34 730 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6)
1000 SH102M050ST 0.16 1110 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8)
2200 SH222M050ST 0.08 1530 0.709 (18.0) 1.40 (36.0) 0.295 (7.5) 0.031 (0.8)
63 Vdc (79 Volts Surge)
4.7 SH4R7M063ST 28.22 34 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
10 SH100M063ST 13.26 55 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
22 SH220M063ST 6.03 90 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5)
33 SH330M063ST 4.02 110 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6)
47 SH470M063ST 2.82 155 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6)
100 SH101M063ST 1.33 260 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6)
220 SH221M063ST 0.60 460 0.394 (10.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6)
330 SH331M063ST 0.40 650 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6)
470 SH471M063ST 0.28 800 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6)
1000 SH102M063ST 0.13 1200 0.630 (16.0) 1.26 (32.0) 0.295 (7.5) 0.031 (0.8)
100 Vdc (125 Volts Surge)
1 SH010M100ST 132.63 15 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
2.2 SH2R2M100ST 60.29 22 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
3.3 SH3R3M100ST 40.19 29 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
4.7 SH4R7M100ST 28.22 37 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
10 SH100M100ST 13.26 65 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5)
22 SH220M100ST 6.03 115 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6)
OBSOLETE
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type SH 105 ºC Radial Leaded Aluminum Electrolytic Capacitors
Capacitance
(uF)
Catalog
Part Number
ESR
120
Hz/+25°C
(ohms)
Max
Ripple Current
120 Hz/
+105°C
(ma)
Size in. (mm)
Diameter
(D)
Length
(L)
Lead Space
(S)
Lead dia.
(d)
35 Vdc (44 Volts Surge)
10 SH100M035ST 18.57 40 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
22 SH220M035ST 8.44 65 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5)
33 SH330M035ST 5.63 85 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5)
47 SH470M035ST 3.95 115 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5)
100 SH101M035ST 1.86 190 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6)
220 SH221M035ST 0.84 315 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6)
330 SH331M035ST 0.56 440 0.394 (10.0) 0.630 (16.0) 0.197 (5.0) 0.024 (0.6)
470 SH471M035ST 0.40 580 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6)
1000 SH102M035ST 0.19 995 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6)
2200 SH222M035ST 0.10 1450 0.630 (16.0) 1.26 (32.0) 0.295 (7.5) 0.031 (0.8)
3300 SH332M035ST 0.07 1660 0.709 (18.0) 1.40 (36.0) 0.295 (7.5) 0.031 (0.8)
50 Vdc (63 Volts Surge)
1 SH010M050ST 159.15 12 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
2.2 SH2R2M050ST 72.34 18 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
3.3 SH3R3M050ST 48.23 25 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
4.7 SH4R7M050ST 33.86 30 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
10 SH100M050ST 15.92 50 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
22 SH220M050ST 7.23 75 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
33 SH330M050ST 4.82 105 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5)
47 SH470M050ST 3.39 125 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6)
100 SH101M050ST 1.59 210 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6)
220 SH221M050ST 0.72 400 0.394 (10.0) 0.630 (16.0) 0.197 (5.0) 0.024 (0.6)
330 SH331M050ST 0.48 535 0.394 (10.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6)
470 SH471M050ST 0.34 730 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6)
1000 SH102M050ST 0.16 1110 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8)
2200 SH222M050ST 0.08 1530 0.709 (18.0) 1.40 (36.0) 0.295 (7.5) 0.031 (0.8)
63 Vdc (79 Volts Surge)
4.7 SH4R7M063ST 28.22 34 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
10 SH100M063ST 13.26 55 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
22 SH220M063ST 6.03 90 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5)
33 SH330M063ST 4.02 110 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6)
47 SH470M063ST 2.82 155 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6)
100 SH101M063ST 1.33 260 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6)
220 SH221M063ST 0.60 460 0.394 (10.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6)
330 SH331M063ST 0.40 650 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6)
470 SH471M063ST 0.28 800 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6)
1000 SH102M063ST 0.13 1200 0.630 (16.0) 1.26 (32.0) 0.295 (7.5) 0.031 (0.8)
100 Vdc (125 Volts Surge)
1 SH010M100ST 132.63 15 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
2.2 SH2R2M100ST 60.29 22 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
3.3 SH3R3M100ST 40.19 29 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
4.7 SH4R7M100ST 28.22 37 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
10 SH100M100ST 13.26 65 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5)
22 SH220M100ST 6.03 115 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6)
Ratings
* Over 160 Vdc the ripple is measured at 85 ºC
Capacitance
(uF)
Catalog
Part Number
ESR
120
Hz/+25°C
(ohms)
Max
Ripple Current
120 Hz/
+105°C
(ma)
Size in. (mm)
Diameter
(D)
Length
(L)
Lead Space
(S)
Lead dia.
(d)
100 Vdc (125 Volts Surge)
33 SH330M100ST 4.02 160 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6)
47 SH470M100ST 2.82 210 0.394 (10.0) 0.630 (16.0) 0.197 (5.0) 0.024 (0.6)
100 SH101M100ST 1.33 385 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6)
220 SH221M100ST 0.60 590 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8)
330 SH331M100ST 0.40 720 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8)
470 SH471M100ST 0.28 875 0.630 (16.0) 1.26 (32.0) 0.295 (7.5) 0.031 (0.8)
*160 Vdc (200 Volts Surge)
1 SH010M160ST 198.94 17 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5)
2.2 SH2R2M160ST 90.43 25 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5)
3.3 SH3R3M160ST 60.29 36 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6)
4.7 SH4R7M160ST 42.33 43 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6)
10 SH100M160ST 19.89 70 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6)
22 SH220M160ST 9.04 130 0.394 (10.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6)
33 SH330M160ST 6.03 180 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6)
47 SH470M160ST 4.23 270 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6)
100 SH101M160ST 1.99 330 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8)
*200 Vdc (250 Volts Surge)
1 SH010M200ST 198.94 17 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5)
2.2 SH2R2M200ST 90.43 25 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5)
3.3 SH3R3M200ST 60.29 36 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6)
4.7 SH4R7M200ST 42.33 50 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6)
10 SH100M200ST 19.89 80 0.394 (10.0) 0.630 (16.0) 0.197 (5.0) 0.024 (0.6)
22 SH220M200ST 9.04 140 0.394 (10.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6)
33 SH330M200ST 6.03 190 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6)
47 SH470M200ST 4.23 220 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6)
100 SH101M200ST 1.99 335 0.630 (16.0) 1.26 (32.0) 0.295 (7.5) 0.031 (0.8)
*250 Vdc (300 Volts Surge)
1 SH010M250ST 198.94 17 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5)
2.2 SH2R2M250ST 90.43 29 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6)
3.3 SH3R3M250ST 60.29 42 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6)
4.7 SH4R7M250ST 42.33 50 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6)
10 SH100M250ST 19.89 88 0.394 (10.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6)
22 SH220M250ST 9.04 155 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6)
33 SH330M250ST 6.03 190 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6)
47 SH470M250ST 4.23 230 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8)
100 SH101M250ST 1.99 340 0.709 (18.0) 1.40 (36.0) 0.295 (7.5) 0.031 (0.8)
*400 Vdc (450 Volts Surge)
22 SH220M400ST 12.06 110 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8)
*450 Vdc (500 Volts Surge)
10 SH100M450ST 26.53 80 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6)
OBSOLETE
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type SH 105 ºC Radial Leaded Aluminum Electrolytic Capacitors
Taping & Packaging
h
W
0
W
t
P
2
P
F
P
1
P
0
d
H
D
0
h
W
0
W
t
P
2
P
F
P
1
P
0
d
H
D
0
H
0
DA
DA
h
W
0
W
t
P
2
P
P
1
P
0
d
H
D
0
H1
A
F
D
Fig. 2 - Straight Taping (5Φ, 6.3Φ, 8Φ)Fig. 1 - Formed Taping
Fig. 4- Straight Taping (16Φ, 18Φ)
t ih
D0
H0
H
W0
WF
P2
P1
P0
PdAD
Max.±0.2±0.2±0.5±0.75Min.±0.5±1.3±0.7±0.2±1.0±0.051.00.5Tolerance +0.8
-0.2
Fig.
Code
Item 8
5, 6.3
5 ~ 8
4 ~ 6.3
10
12, 13
16, 18 26.0
26.0
21.0
12.5
12.5
12.5
7.0 0.45
0.6
0.6
0.5
0.5
0.5
30.00.8 15.0
15.0
12.7
12.7
12.7
12.7
12.712.7
12.7
15.0
12.7
12.7
12.7
3.75
5.0
3.85
4.6
5.1
3.85
3.85
7.5
7.5
6.35
6.35
6.35
6.35
6.35
7.5
5.0
5.0
3.5
2.5
5.0
5.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
12.5
12.5
12.5
12.5
12.5
12.5
12.5
18.0
18.5
18.5
18.5
18.5
18.5
18.5 16.0
16.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
0.7
0.7
0.7
0.7
0.7
0.7
0.7
2.0
2.0
2.0
2.0
2.0
2.0
2.0
3
2
1
Ammo Pack
Ammo Pack boxes are shipped 5
to the outer packing carton
A
B
C
4 44 1500
5 44 1200
6 44 1000
8 44 800
10 (12L) 44 600
10 (16L) 50 600
12, 13 - -
16
Tape And Reel Quantities
Case
Diameter Reel Reel Qty.
D (mm) Width (Pcs.)
4 250 340 54 3000
5 250 340 54 2,000
6.3 290 340 54 2,000
8 250 340 54 1,000
10 (12 L) 290 340 54 600
10 (16 L) 350 340 59 600
10 (20 L) 340 340 71 600
12, 13 340 340 71 400
16 340 340 71 300
C±3
A±5 B Max
Quantity
Per
Ammo Pack Box
Capacitor
Diameter
D
(mm)
Ammo Pack Box
Dimensions (mm)
Fig. 3- Straight Taping (Under 10Φ, 12Φ, 13Φ)
h
W
0
W
P
2
P
F
P
1
P
0
d
H
D
0
DA
t
4
Standard Lead Spacing of Taped Components is 5mm
Other Lead Spacing is Available by Special Order
OBSOLETE
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type SH 105 ºC Radial Leaded Aluminum Electrolytic Capacitors
Notice and Disclaimer: All product drawings, descriptions, specications, statements, information and
data (collectively, the “Information”) in this datasheet or other publication are subject to change. The
customer is responsible for checking, conrming and verifying the extent to which the Information con-
tained in this datasheet or other publication is applicable to an order at the time the order is placed. All
Information given herein is believed to be accurate and reliable, but it is presented without any guaran-
tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability
for certain applications are based on the knowledge that the Cornell Dubilier company providing such
statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards
as typical for such applications, but are not intended to constitute any guarantee, warranty or representa-
tion regarding any such matter – and Cornell Dubilier specically and expressly disclaims any guarantee,
warranty or representation concerning the suitability for a specic customer application, use, storage,
transportation, or operating environment. The Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference
to the use of any Cornell Dubilier products is given gratis (unless otherwise specied by Cornell Dubilier),
and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although
Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design
and manufacturing of its products, in light of the current state of the art, isolated component failures may
still occur. Accordingly, customer applications which require a high degree of reliability or safety should
employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies
or other appropriate protective measures) in order to ensure that the failure of an electrical component
does not result in a risk of personal injury or property damage. Although all product-related warnings,
cautions and notes must be observed, the customer should not assume that all safety measures are indi-
cated in such warnings, cautions and notes, or that other safety measures may not be required.
OBSOLETE
