1
2
3
Features
• AEC-Q101 qualified
• Dual-line ESD and EOS protection
• Breakdown voltage, VBR:
– ESDCAN02-2BWY: 28.5 V
– ESDCAN03-2BWY: 26.5 V
– ESDCAN04-2BWY: 27.5 V
– ESDCAN05-2BWY: 39 V
– ESDCAN06-2BWY: 38 V
• Bidirectional device
• Max pulse power up to 170 W (8/20 μs)
• Low clamping factor VCL / VBR
• Low leakage current
•ECOPACK®2 ROHS compliant component
Complies with the following standards
• UL94, V0
• J-STD-020 MSL level 1
• IPC7531 footprint and JEDEC registered package
• ISO 16750-2 (Jump start and reversed battery tests)
• ISO 10605 - C = 150 pF, R = 330 Ω, exceeds level 4:
– ±30 kV (air discharge)
– ±30 kV (contact discharge)
• ISO 10605 - C = 330 pF, R = 330 Ω exceeds level 4:
– ±30 kV (air discharge)
– ±30 kV (contact discharge)
• ISO 7637-3:
– Pulse 3a: -150 V
– Pulse 3b: +150 V
– Pulse 2a: +/- 85 V
Applications
Automotive controller area network (CAN) bus lines where electrostatic discharges
and other transients must be suppressed. These product are compliant with most of
automotive interfaces.
Description
These devices are dual-line transient voltage suppressor (TVS) specifically designed
for the protection of automotive CAN bus lines against electrostatic discharge (ESD).
Their improved parameters make them compliant with all key drivers in automotive:
CAN-FD, LIN, FlexRay, MOST, SENT, USB, etc.
Product status link
ESDCANxx-2BWY
ESDCAN02-2BWY,
ESDCAN03-2BWY,
ESDCAN04-2BWY,
ESDCAN05-2BWY,
ESDCAN06-2BWY
Automotive dual-line TVS in SOT323-3L for CAN bus
ESDCANxx-2BWY
Datasheet
DS12789 - Rev 2 - November 2018
For further information contact your local STMicroelectronics sales office.
www.st.com
1Characteristics
Table 1. Absolute ratings (Tamb = 25 °C)
Symbol Parameter Value Unit
VPP Peak pulse voltage
ISO 10605 - C = 150 pF, R = 330 Ω:
Contact discharge
Air discharge
30
30
kV
ISO 10605 - C = 330 pF, R = 330 Ω:
Contact discharge
Air discharge
ESDCAN02-2BWY
ESDCAN03-2BWY
ESDCAN04-2BWY
30
30
ISO 10605 - C = 330 pF, R = 330 Ω:
Contact discharge
Air discharge
ESDCAN05-2BWY
ESDCAN06-2BWY 22
22
IPP Peak pulse current (8/20 μs)
ESDCAN02-2BWY
ESDCAN03-2BWY
ESDCAN04-2BWY
3.7
A
ESDCAN05-2BWY
ESDCAN06-2BWY 3
TjOperating junction temperature range -55 to +175 °C
Tstg Storage temperature range -55 to +175 °C
Figure 1. Electrical characteristics (definitions)
Stand-off voltage
Ipp
ESDCANxx-2BWY
Characteristics
DS12789 - Rev 2 page 2/14
Table 2. Electrical characteristics (values, Tamb = 25 °C)
Order code
IRM max. at VRM VBR at IRVCLPulse ISO7637-3 VCL at IPP (8/20 µs) CΔC(1) αT (2)
Min. Max. 3a at -150 V
min.
3b at +150 V
max. Max. Typ. Max. Typ. Typ.
µA V V mA V V A pF pF 10-4/°C
ESDCAN02-2BWY 0.01 26.5 28.5 31.7 1 -36 36 44 3 3 3.5 0.01 9
ESDCAN03-2BWY 0.01 24 26.5 29.7 1 -34 34 41 3 3 3.5 0.01 9
ESDCAN04-2BWY 0.05 25.5 27.5 30.7 1 -35 35 43 3 17 19 0.1 9
ESDCAN05-2BWY 0.1 36 39 43.3 1 -45 45 61 3 3 3.5 0.01 9
ESDCAN06-2BWY 0.1 35 38 42.2 1 -44 44 59 3 13 15 0.1 9
1. ΔC : capacitance variation between IO1 and IO2 versus GND
2. to calculate VBR versus Tj: VBR at Tj = VBR at 25 °C x (1 + αT x (Tj - 25) )
ESDCANxx-2BWY
Characteristics
DS12789 - Rev 2 page 3/14
1.1 Characteristics (curves)
Figure 2. Maximum peak current versus initial junction temperature
0
1
2
3
4
0 25 50 75 100 125 150 175 200
Ipp (A)
Tj (°C)
ESDCAN02-2BWY
ESDCAN03-2BWY
ESDCAN04-2BWY
ESDCAN05-2BWY
ESDCAN06-2BWY
8/20 µs
Figure 3. Maximum peak pulse current versus exponential
pulse duration
0.1
1
10
0.01 0.1 1
IPP (A)
tp (ms)
Tjinitial = 25 °C
ESDCAN02-2BWY
ESDCAN03-2BWY
ESDCAN04-2BWY
ESDCAN05-2BWY
ESDCAN06-2BWY
Figure 4. Peak pulse current versus clamping voltage
0.1
1
10
20 25 30 35 40 45 50 55 60 65 70
Ipp (A)
VCL (V)
ESDCAN02-2BWY
ESDCAN03-2BWY
ESDCAN04-2BWY
ESDCAN05-2BWY
ESDCAN06-2BWY
8/20 µs
Figure 5. Junction capacitance versus reverse applied
voltage
1
10
100
0 5 10 15 20 25 30 35 40
C(pF)
VR (V)
ESDCAN02-2BWY
ESDCAN03-2BWY
ESDCAN04-2BWY
ESDCAN05-2BWY
ESDCAN06-2BWY
f = 1 MHz
Vosc = 30 mVRMS
Tj = 25 °C
Figure 6. Leakage current versus junction temperature
0.1
1.0
10.0
100.0
25 50 75 100 125 150 175
IR(nA)
Tj (°C)
VR=VRM
ESDCAN02-2BWY
ESDCAN03-2BWY
ESDCAN04-2BWY
ESDCAN05-2BWY
ESDCAN06-2BWY
ESDCANxx-2BWY
Characteristics (curves)
DS12789 - Rev 2 page 4/14
Figure 7. Response to ISO 10605 -C = 150 pF, R = 330 Ω (-8 kV contact)
Figure 8. Response to ISO 10605 - C = 150 pF, R = 330 Ω (+8 kV contact )
Figure 9. Response to ISO 7637-3 Pulse 3a: -150 V
ESDCANxx-2BWY
Characteristics (curves)
DS12789 - Rev 2 page 5/14
Figure 10. Response to ISO 7637-3 Pulse 3b : +150 V
Figure 11. Response to ISO 7637-3 pulse 2a: -85 V
Figure 12. Response to ISO 7637-3 pulse 2a: +85 V
ESDCANxx-2BWY
Characteristics (curves)
DS12789 - Rev 2 page 6/14
Figure 13. S21 attenuation
Figure 14. TLP
-25
-20
-15
-10
-5
0
5
10
15
20
25
-60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60
I (A)
V (V)
ESDCAN02-2BWY
ESDCAN03-2BWY
ESDCAN04-2BWY
ESDCAN05-2BWY
ESDCAN06-2BWY
ESDCANxx-2BWY
Characteristics (curves)
DS12789 - Rev 2 page 7/14
2Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK®
packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions
and product status are available at: www.st.com. ECOPACK® is an ST trademark.
2.1 SOT323-3L package information
Figure 15. SOT323-3L package outline
L
H
c
b
E
e
θ
A
A1
D
Table 3. SOT323-3L package mechanical data
Ref.
Dimensions
Millimeters Inches(1)
Min. Typ. Max. Min. Typ. Max.
A 0.80 1.10 0.031 0.044
A1 0.00 0.10 0.000 0.004
b 0.25 0.40 0.009 0.016
c 0.10 0.26 0.003 0.011
D 1.80 2.00 2.20 0.070 0.079 0.087
E 1.15 1.25 1.35 0.045 0.049 0.054
e 0.60 0.65 0.70 0.023 0.026 0.028
H 1.80 2.10 2.40 0.070 0.083 0.095
L 0.10 0.20 0.30 0.004 0.008 0.012
ϴ 0 30° 0 30°
1. Values in inches are converted from mm and rounded to 3 decimal digits
ESDCANxx-2BWY
Package information
DS12789 - Rev 2 page 8/14
2.2 Packing information
Figure 16. SOT323-3L footprint in mm (inches)
0.65
1.30
0.70
0.42
2.70
1.72
0.44
0.65
Figure 17. SOT323-3L marking
X X X X
XXXX : Marking
Figure 18. Package orientation in reel
Pin 1 located according to EIA-481
Note: Pocket dimensions are not on scale
Pocket shape may vary depending on package
Figure 19. Tape and reel orientation
Figure 20. 7'' reel dimension values
Ø 60 Ø 20.2 min
Ø 180 max
Ø 13
2±0.5
14.4
Figure 21. Inner box dimension values
205
205
30
ESDCANxx-2BWY
Packing information
DS12789 - Rev 2 page 9/14
Figure 22. Tape outline
Table 4. Tape dimension values
Ref.
Dimensions
Millimeters
Min. Typ. Max.
D0 1.50 1.55 1.6
D1 1.00
F 3.45 3.50 3.55
K0 1.12 1.22 1.32
P0 3.90 4.00 4.10
P1 3.90 4.00 4.10
P2 1.95 2.00 2.05
W 7.90 8.00 8.30
ESDCANxx-2BWY
Packing information
DS12789 - Rev 2 page 10/14
3Reflow profile
Figure 23. ST ECOPACK® recommended soldering reflow profile for PCB mounting
250
0
50
100
150
200
240210180150120906030 300270
-6 °C/s
240-245 °C
2 - 3 °C/s
Temperature (°C) -2 °C/s
-3 °C/s
Time (s)
0.9 °C/s
60 sec
(90 max)
Note: Minimize air convection currents in the reflow oven to avoid component movement. Maximum soldering profile
corresponds to the latest IPC/JEDEC J-STD-020.
ESDCANxx-2BWY
Reflow profile
DS12789 - Rev 2 page 11/14
4Ordering information
Figure 24. Ordering information scheme
Table 5. Ordering information
Order code Marking (1) Package Weight Base qty. Delivery mode
ESDCAN02-2BWY C02
SOT323-3L 6.58 mg 3000 Tape and reel
ESDCAN03-2BWY C03
ESDCAN04-2BWY C04
ESDCAN05-2BWY C05
ESDCAN06-2BWY C06
1. The marking can be rotated by multiples of 90° to differentiate assembly location
ESDCANxx-2BWY
Ordering information
DS12789 - Rev 2 page 12/14
Revision history
Table 6. Document revision history
Date Revision Changes
17-Oct-2018 1 First issue.
13-Nov-2018 2 Updated product name on cover page.
ESDCANxx-2BWY
DS12789 - Rev 2 page 13/14
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2018 STMicroelectronics – All rights reserved
ESDCANxx-2BWY
DS12789 - Rev 2 page 14/14