12-100
Package Dimensions
High Transfer Efficiency
Type Photocoupler
LTV-815 Series
Features
High current transfer ratio
(CTR : MIN. 600% at IF=1mA, VCE=2V)
High input-output isolation voltage:
(VISO : 5,000Vrms)
Compact dual-in-line package
LTV-815 : 1-channel type
LTV-825 : 2-channel type
LTV-845 : 4-channel type
UL approved (No. E113898)
TUV approved (No.R9653630)
CSA approved (No. CA91533-1)
FIMKO approved (No. 193422)
NEMKO approved (No. P96103013)
DEMKO approved (No. 303986)
SEMKO approved (No. 9646047/01-30)
VDE approved (No. 094722)
Options available :
-Leads with 0.4"(10.16mm)spacing (M Type)
-Leads bends for surface mounting(S Type)
-Tape and Reel of Type I for SMD(Add"-TA"Suffix)
-Tape and Reel of Type II for SMD(Add"-TA1"Suffix)
-VDE 0884 approvals (Add"-V"Suffix)
Applications
1. Telephone sets, telephone exchangers.
2. Sequence controllers.
3. System appliances, measuring instruments.
4. Signal transmission between circuits of different
potentials and impedances.
PHOTOCOUPLER
12-101
Ordering Information
Part Number Package Safety Standard Approval Application part
number
LTV-815
LTV-815M
LTV-815S
LTV-815S-TA
LTV-815S-TA1
LTV815-V
LTV815M-V
LTV815S-V
LTV815STA-V
LTV815STA1-V
LTV-825
LTV-825M
LTV-825S
LTV-825S-TA
LTV-825S-TA1
LTV-845
LTV-845M
LTV-845S
LTV-845S-TA
LTV-845S-TA1
LTV825-V
LTV825M-V
LTV825S-V
LTV825STA-V
LTV825STA1-V
LTV845-V
LTV845M-V
LTV845S-V
LTV845STA-V
LTV845STA1-V
4-pin DIP
4-pin (leads with 0.4" spacing)
4-pin (lead bends for surface mount)
4-pin (tape and reel packaging of type I)
4-pin (tape and reel packaging of type II)
8-pin DIP
8-pin (leads with 0.4" spacing)
8-pin (lead bends for surface mount)
8-pin (tape and reel packaging of type I)
8-pin (tape and reel packaging of type II)
16-pin DIP
16-pin (leads with 0.4" spacing)
16-pin (lead bends for surface mount)
16-pin (tape and reel packaging of type I)
16-pin (tape and reel packaging of type II)
4-pin DIP
4-pin (leads with 0.4" spacing)
4-pin (lead bends for surface mount)
4-pin (tape and reel packaging of type I)
4-pin (tape and reel packaging of type II)
8-pin DIP
8-pin (leads with 0.4" spacing)
8-pin (lead bends for surface mount)
8-pin (tape and reel packaging of type I)
8-pin (tape and reel packaging of type II)
16-pin DIP
16-pin (leads with 0.4" spacing)
16-pin (lead bends for surface mount)
16-pin (tape and reel packaging of type I)
16-pin (tape and reel packaging of type II)
UL approved
TUV approved
CSA approved
FIMKO approved
NEMKO approved
SEMKO approved
DEMKO approved
VDE approved
LTV-815
LTV-825
LTV-845
LTV-815
LTV-825
LTV-845
Note:
1.Year date code.
2. 2-digit work week.
3. Factory code shall be marked (Z : Taiwan, Y : Thailand).
4. All dimensions are in millimeters (inches).
5. Tolerance is 0.25mm (.010 ) unless otherwise noted.
6. Specifications are subject to change without notice.
12-102
Absolute Maximum Ratings (Ta=25 )
Parameter Symbol Rating Unit
Input
Output
Total Power Dissipation
Operating Temperature
Storage Temperature
*1.Isolation Voltage
*2.Soldering Temperature
Forward Current
Reverse Voltage
Power Dissipation
Collector-Emitter Voltage
Emitter-Collector Voltage
Collector Current
Collector Power Dissipation
IF
VR
P
VCEO
VECO
IC
PC
Ptot
Topr
Tstg
Viso
Tsol
50
6
70
35
6
80
150
200
-30~+100
-55~+125
5
260
mA
V
mW
V
V
mA
mW
mW
KVrms
*1. AC for 1 minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
(1)Short between anode and cathode on the primary side and between collector, emitter and base on the secondary side.
(2)The isolation voltage tester with zero-cross circuit shall be used.
(3)The waveform of applied volttage shall be a sine wave.
*2. For 10 seconds.
Electrical/Optical Characteristics (Ta=25 )
Parameter Symbol Min. Typ. Max. Unit Conditions
InputOutputTransfer Characteristics
Forward Voltage
Reverse Current
Terminal Capacitance
Collector Dark Current
Collector-Emitter
Breakdown Voltage
Emitter-Collector
Breakdown Voltage
Collector Current
*Current Transfer Ratio
Collector-emitter
Saturation Voltage
Isolation Resistance
Floating Capacitance
Cut-off Frequency
Response Time (Rise)
Response Time (Fall)
VF
IR
Ct
ICEO
BVCEO
BVECO
IC
CTR
VCE(sat)
RISO
Cf
fc
tr
tf
35
6
6
600
50
1
1.2
30
0.8
100
0.6
6
60
53
1.4
10
250
1
75
7,500
1.0
1.0
300
250
V
A
pF
A
V
V
mA
%
V
G
pF
KHz
s
s
IF=20mA
VR=4V
V=0, f=1KHz
VCE=10V
IC=0.1mA
IE=10 A
IF=1mA VCE=2V
IF=20mA, IC=5mA
DC500V, 40~60% R.H.
V=0, f=1MHz
VCE=5V, IC=2mA
RL=100 , -3dB
VCE=2V, IC=10mA
RL=100
*CTR= 100%
IC
IF
PHOTOCOUPLER
12-103
Typical Electrical/Optical Characteristic Curves
(25 Ambient Temperature Unless Otherwise Noted)
12-104
