FERD30SM100DJF Field effect rectifier Datasheet - production data Description $ $ . $ The FERD30SM100DJF is based on a proprietary technology that achieves the best in class VF/IR trade-off for a given silicon surface. This 100 V rectifier has been optimized for use in confined applications where both efficiency and thermal performance are key. $ . . $ Table 1. Device summary $ Symbol Value IF(AV) 30 A VRRM 100 V Tj (max) +175 C VF(typ) 0.395 V 3RZHU)/$7[ Features * ST proprietary process * Reduce leakage current * Low forward voltage drop * High frequency operation * ECOPACK(R)2 compliant component TM: PowerFLAT is a trademark of STMicroelectronics January 2015 This is information on a product in full production. DocID027306 Rev 1 1/8 www.st.com Characteristics 1 FERD30SM100DJF Characteristics Table 2. Absolute ratings (limiting values, at 25 C, unless otherwise specified, anode terminals short-circuited) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 100 V IF(RMS) Forward rms current 45 A IF(AV) Average forward current, = 0.5 Tc = 100 C 30 A IFSM Surge non repetitive forward current tp = 10 ms sinusoidal 180 A Tstg Storage temperature range -65 to + 175 C 175 C Tj (1) Maximum operating junction temperature 1 dPtot < condition to avoid thermal runaway for a diode on its own heatsink Rth(j-a) dTj 1. Table 3. Thermal resistance Symbol Rth(j-c) Parameter Value (max) Unit 2.6 C/W Junction to case Table 4. Static electrical characteristics (anode terminals short-circuited) Symbol Parameter Test conditions Tj = 25 C IR (1) Reverse leakage current Tj = 125 C Tj = 125 C Tj = 25 C Tj = 125 C VF(2) Forward voltage drop Tj = 25 C Tj = 125 C Tj = 25 C Tj = 125 C VR = VRRM Min. Typ. Max. Unit - - 150 A - 8 16 - - 9 - - 0.48 - 0.395 0.435 - - 0.595 - 0.51 0.555 mA VR = 70 V IF = 5 A IF = 10A V - IF = 30 A - 1. Pulse test: tp = 5 ms, < 2% 2. Pulse test: tp = 380 s, < 2% To evaluate the conduction losses use the following equation: P = 0.562 x IF(AV) + 0.0057 IF2(RMS) 2/8 DocID027306 Rev 1 0.97 0.665 0.735 FERD30SM100DJF Characteristics Figure 1. Average forward power dissipation versus average forward current 3) $9 : Figure 2. Average forward current versus ambient temperature ( = 0.5) ,) $9 $ 5 WK MD 5 WK MF 7 7 WS7 WS ,) $9 $ WS7 Figure 3. Relative variation of thermal impedance junction to case versus pulse duration =WK MF 5WK MF 7DPE & WS Figure 4. Reverse leakage current versus reverse voltage applied (typical values) ( ,5 P$ 7 & M 7 & M ( 7 & M 7 & M ( 6LQJOHSXOVH ( 7 & M W3 V ( ( ( 9 9 ( Figure 5. Junction capacitance versus reverse voltage applied (typical values) 5 ( Figure 6. Forward voltage drop versus forward current (typical values) , $ ) & S) ) 0+] 926& P9506 7M & 7 & M 7 & M 7 & 9 5 M 9 DocID027306 Rev 1 9 9 ) 3/8 8 Characteristics FERD30SM100DJF Figure 7. Thermal resistance junction to ambient versus copper surface under tab (typical values) R th( j - a)(C/W) 150 Epoxy printed board Fr4, copper thickness = 35 m 125 100 75 50 25 SCu (cm) 0 0 4/8 1 2 3 4 5 DocID027306 Rev 1 6 7 8 9 10 FERD30SM100DJF 2 Package information Package information * Epoxy meets UL94, V0 * Cooling method: by conduction (C) In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Figure 8. PowerFLAT-8L dimensions (definitions) D2 E2 K b e L A A1 D A2 E Table 5. PowerFLAT-8L dimensions (values) Dimensions Ref. Millimeters Min. Typ. Inches Max. Min. Typ. Max. A 0.80 1.00 0.031 0.039 A1 0.02 0.05 0.001 0.002 A2 b 0.25 0.30 D D2 0.010 0.50 0.012 5.20 4.11 0.020 0.205 4.31 0.162 0.170 e 1.27 0.050 E 6.15 0.242 E2 3.50 3.70 0.138 0.146 L 0.50 0.80 0.020 0.031 K 1.275 1.575 0.050 0.062 DocID027306 Rev 1 5/8 8 Package information FERD30SM100DJF Figure 9. Footprint (dimensions in mm) 3.86 4.33 6.29 5.35 4.41 0.98 0.95 0.62 1.27 6/8 DocID027306 Rev 1 FERD30SM100DJF 3 Ordering information Ordering information Table 6. Ordering information 4 Order code Marking Package Weight Base qty Delivery mode FERD30SM100DJF F30SM 100 PowerFLAT 5x6 95 mg 3000 Tape and reel Revision history Table 7. Document revision history Date Revision 09-Jan-2015 1 Changes Initial release. DocID027306 Rev 1 7/8 8 FERD30SM100DJF IMPORTANT NOTICE - PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST's terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers' products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. (c) 2015 STMicroelectronics - All rights reserved 8/8 DocID027306 Rev 1 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: STMicroelectronics: FERD30SM100DJFTR