MCC TM Micro Commercial Components LCE6.5A THRU LCE28A omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features Glass passivated junction Excellent clamping capability Low incremental surge resistance 1500W Peak Pulse Power capability with a 10/1000s waveform 1500Watts Low Capacitance Transient Voltage Suppressor 6.5 to 28 Volts Excellent clamping capability DO-201AE Mechanical Characteristics Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 D Weight: 0.045 ounce, 1.2 grams Maximum Ratings o o A Operating Temperature: -55 C to +175 C o Cathode Mark o Storage Temperature: -55 C to +175 C B For Parts without A , the VBR is + - 20% D Electrical Characteristics @ 25OC Unless Otherwise Specified C Peak Pulse Power Dissipation P PPM 1500W Peak Power Pules Surger Current IPPM See the Table P M(AV) 5.0W Steady State Power Dissipation o T A =25 C DIMENSIONS o T L =75 C DIM A B C D INCHES MIN ----.038 1.000 MAX .370 .250 .042 --- MM MIN ----0.96 25.40 MAX 9.50 6.40 1.06 --- NOTE www.mccsemi.com Version: 4 1 of 4 2007/07/19 MCC LCE6.5A thru LCE28A TM Micro Commercial Components Fig. 1 - Peak Pulse Power Rating Curve Fig.2-Power Derating Curve 100 100 Percentage of Rated Power(%) PPPM-Peak Pulse Power (kW) Average Power 10 1 87.5 75 Peak Power (single pulse) 62.5 50 37.5 25 Lead Lengths 0.375" (9.5mm) 12.5 0.1 0 0.1s 1.0s 10s 100s 1.0ms 0 10ms 25 50 75 100 125 150 175 TL Lead Temperature (C) td - Pulse Width (sec.) Fig. 4 - AC Line Protection Application Fig.3 - Pulse Waveform 150 TJ = 25C IPPM - Peak Pulse Current,% IRSM tr = 10sec. Pulse Width (td) is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 Low Capacitance TVS Half Value- IPPM 2 50 10/1000sec.Waveform as defined by R.E.A. td 0 0 1.0 2.0 3.0 t - Time(ms) 3.0 4.0 Application Note: Device must be used with two units in parallel,opposite in polarity as shown in circuit for AC signal line protection. 4.0 www.mccsemi.com Version: 4 2 of 4 2007/07/19 MCC LCE6.5A thru LCE28A TM Micro Commercial Components STAND- BREAKDOWN MAXIMUM MAXIMUM MAXIMUM MAXIMUM TEST WORKING LCE VOLTAGE CURRENT REVERSE OFF CLAMPING JUNCTION PEAK INVERSE PART CAPACITANCE BLOCKING LEAKAGE VOLTAGE AT AT PULSE NUMBER VOLTAGE V(BR) (VOLTS) AT VWM MIN-MAX VWM Ipp Vc IT(mA) CURRENT AT O VOLTS VOLTAGE (VOLTS) (pF) FIG.3 IPPM V WIB (VOLTS) IR ( A) UNI-POLAR (AMPS) (VOLTS) LCE6.5A LCE7.0A LCE7.5A LCE8.0A LCE8.5A LCE9.0A LCE10A LCE11A LCE12A LCE13A LCE14A LCE15A LCE16A LCE17A LCE18A LCE20A LCE22A LCE24A LCE26A LCE28A 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 7.22-7.98 7.78-8.60 8.33-9.21 8.89-9.83 9.44-10.40 10.00-11.10 11.10-12.30 12.20-13.50 13.30-14.70 14.40-15.90 15.60-17.20 16.70-18.50 17.80-19.70 18.90-20.90 20.00-22.10 22.20-24.50 24.40-26.90 26.70-29.50 28.90-31.90 31.10-34.40 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1000 500 250 100 50 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.5 100 100 100 100 100 97 88 82 75 70 65 61 57 54 51 46 42 39 36 33 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 WORKING INVERSE BLOCKING VOLTAGE V WIB (VOLTS) PEAK INVERSE BLOCKING VOLTAGE VPIB (VOLTS) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 www.mccsemi.com Version: 4 3 of 4 2007/07/19 MCC TM Micro Commercial Components ***IMPORTANT NOTICE*** Micro Commercial Components Corp . reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***APPLICATIONS DISCLAIMER*** Products offer by Micro Commercial Components Corp . are not intended for use in Medical, Aerospace or Military Applications. www.mccsemi.com Revision: 4 4 of 4 2007/07/19