2015 Microchip Technology Inc. DS50002445A
MCP39F511N
Power Monitor
Demonstration Board
User’s Guide
DS50002445A-page 2 2015 Microchip Technology Inc.
Information contained in this publication regarding device
applications a nd the lik e is p ro vided on ly for yo ur con ve nien ce
and may be supers eded by updates . I t is you r r es ponsibil it y to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights unless otherwise stated.
Note the following details of the code protection feature on Microch ip devices:
• Microchip products meet the specification contained in their particular Microchip Data Sheet.
• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
• Microchip is willing to work with the customer who is concerned about the integrity of their code.
• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digit al Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Microchip received ISO/TS-16949:2009 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping
devices, Serial EEPROMs, microperiph erals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
QUALITY MANAGEMENT S
YSTEM
CERTIFIED BY DNV
== ISO/TS 16949 ==
Trademarks
The Microchip name and logo, the Microchip logo, dsPIC,
FlashFlex, flexPWR, JukeBlox, KEELOQ, KEELOQ logo, Kleer,
LANCheck, MediaLB, MO ST, MOST lo go, MPLAB ,
OptoL yzer , PIC, PICSTART, PIC32 logo, RightTouch, SpyNIC,
SST, SST Logo, SuperFlash and UNI/O are registered
trademarks of Microchip Technology Incorporated in the
U.S.A. and other countries.
The Embedded Control Solutions Company and mTouch are
registered trademarks of Microchip Technology Incorporated
in the U.S.A.
Analog-for-the-Digital Age, BodyCom, chipKIT, chipKIT logo,
CodeGuard, dsPICDEM, dsPICDEM.net, ECAN, In-Circuit
Serial Programming, ICSP, Inter-Chip Connectivity, KleerNet,
KleerNet logo, MiWi, motorBench, MPASM, MPF, MPLAB
Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach,
Omniscient Code Generation, PICDEM, PICDEM.net, PICkit,
PICtail, RightTouch logo, REAL ICE, SQI, Serial Quad I/O,
Total Endurance, TSHARC, USBCheck, VariSense,
ViewSpan, WiperLock, Wireless DNA, and ZENA are
trademarks of Microchip Technology Incorporated in the
U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
Silicon Storage Technology is a registered trademark of
Microchip Technology Inc. in other countries.
GestIC is a registered trademark of Microchip Technology
Germany II GmbH & Co. KG, a subsidiary of Microchip
Technology Inc., in other countries.
All other trademarks mentioned herein are property of their
respective companies.
© 2015, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
ISBN: 978-1-5224-0104-9
2015 Microchip Technology Inc. DS50002445A-page 3
Object of Declaration: MCP39F511N Power Monitor Demonstration Board
VP Development Tools
MCP39F511N Power Monitor Demonstration Board User’s Guide
DS50002445A-page 4 2015 Microchip Technology Inc.
NOTES:
MCP39F511N POWER MONITOR
DEMONSTRATION BOARD
USER’S GUIDE
2015 Microchip Technology Inc. DS50002445A-page 5
Table of Contents
Preface ...........................................................................................................................7
Introduction............................................................................................................ 7
Document Layout .................................................................................................. 7
Conventions Used in this Guide............................................................................ 8
Recommended Reading.................. .. .. .............. .. .. .............. .. ................. .............. .9
The Microchip Web Site ........................................................................................ 9
Customer Support........................................... .............................. ........................9
Document Revision History................................................................................... 9
Chapter 1. Product Overview
1.1 Introduction ...................................................................................................11
1.2 What the MCP39F511N Power Monitor Demonstration Board Kit
Includes .................................................................................................. 12
Chapter 2. Installation and Operation
2.1 Ge tting St a rt ed ......... ...... ....... ...... ....... .. ....... ...... ....... ....... ...... ....... ....... ...... ... 13
Chapter 3. Hardware Description
3.1 Input and Analog Front End .........................................................................17
3.2 Power S upp ly Cir cuit ........... ...... ....... ...... ....... ....... ...... ........... ....... ....... ...... ... 18
Appendix A. Schematic and Layouts
A.1 Introduction ..................................................................................................19
A.2 Schematics and PCB Layout ................... .. ................. .............. .. .................19
A.3 Bo a rd – Sc h ematic ....... .. ....... ...... ....... ....... ...... ....... ....... ...... ....... ...... ....... ..... 2 0
A.4 Bo a rd – Sc h ematic (C on tinu ed) ..... .. .. ....... ...... ....... ....... ...... ....... ...... ....... ..... 2 1
A.5 Bo a rd – To p Sil k .......... ....... ...... ....... ...... ....... ....... ...... ....... ....... ...... .. ....... ..... 22
A.6 Board – Top Copper and Silk .......................................................................23
A.7 Board – Top Copper ....................................................................................24
A.8 Board – Bottom Copper ...............................................................................25
A.9 Board – Bottom Copper and Silk .................................................................26
A.10 B o ard – Bo tt om Silk . .. .. ........... ....... ...... ....... ....... ...... ....... ....... ........... ...... ...27
Appendix B. Bill of Materials (BOM)...........................................................................29
Worldwide Sales and Service ....................................................................................32
MCP39F511N Power Monitor Demonstration Board User’s Guide
DS50002445A-page 6 2015 Microchip Technology Inc.
NOTES:
MCP39F511N POWER MONITOR
DEMONSTRATION BOARD
USER’S GUIDE
2015 Microchip Technology Inc. DS50002445A-page 7
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
MCP39F511N Power Monitor Demonstration Board. Items discussed in this chapter
include:
• Document Lay out
• Conventions Used in this Guide
• Recommended Reading
• The Microchip Web Site
• Customer Support
• Document Rev isio n History
DOCUMENT LAYOUT
This document describes how to use the MCP39F51 1N Power Monitor Demonstration
Board as a demonstration board to evaluate the MCP39F511N device. The manual
layout is as follows:
•Chapter 1. “Product Overview” – Provides important information about the
MCP39F511N Power Monitor Demonstration Board
•Chapter 2. “Installation and Operation” – Provides information on using the
MCP39F511N Power Monitor Demonstration Board, including
Section 2.1.1 “Step 1: Wiring connections” that describes wiring the line and
load connections
•Chapter 3. “Hardwa re Desc ript ion ” – Provides details on the functional blocks
of the power monitor, including the analog front-end design and power supply
design
•Appendix A. “Schematic and Layouts” – Shows the schematic and layout
diagrams
•Appendix B. “Bill of Materials (BOM)” – Lists the parts used to build the
MCP39F511N Power Monitor Demonstration Board
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXA”, where “XXXXXXX” is the document number and “A” is the revision level of
the document.
For the most up-to-date information on development tools, see the MPLAB® IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
MCP39F511N Power Monitor Demonstration Board User’s Guide
DS50002445A-page 8 2015 Microchip Technology Inc.
CONVENTIONS USED IN THIS GUIDE
This manu al us es the followi ng docum entatio n conv en tion s:
DOCUMENTATION CONVENTIONS
Description Represents Examples
Arial font:
Italic characters Referenced books MPLAB® IDE User’s Guide
Emphasized text ...is the only comp ile r...
Initial caps A window the Output window
A dialog the Settings dialog
A menu selection select Enable Programmer
Quotes A field name in a window or
dialog “Save project before build”
Underlined, italic text with
right angle bracket A menu path File>Save
Bold characters A dialog button Click OK
A tab Click the Power tab
N‘Rnnnn A number in verilo g forma t,
where N is the tota l number of
digit s, R is th e radi x and n is a
digit.
4‘b0010, 2‘hF1
Text in a ngle brackets < > A key on the keybo ard Press <Ent er> , <F1>
Courier New font:
Plain Courie r New Sample source code #define START
Filenames autoexec.bat
File paths c:\mcc18\h
Keywords _asm, _endasm, static
Command-line options -Opa+, -Opa-
Bit values 0, 1
Constants 0xFF, ‘A’
Italic Courier New A variable argument file.o, where file can b e
any val id filena me
Square brackets [ ] Optional arguments mcc18 [options] file
[options]
Curly brackets and pipe
character: { | } Choice of mutually exclusive
arguments; an OR selection errorlevel {0|1}
Ellipses... R eplaces repe ated text var_name [,
var_name...]
Represents code supplied by
user void main (void)
{ ...
}
Preface
2015 Microchip Technology Inc. DS50002445A-page 9
RECOMMENDED READING
This user's guide describes how to use MCP39F511N Power Monitor Demonstration
Board. Another useful document is listed below. The following Microchip document is
available and recommended as a supplemental reference resource:
MCP39F511N Data Sheet – “Dual-Channel, Single-Phase Power-Monitoring IC
with Calculation” (DS20005473)
This data sheet provides detailed information regarding the MCP39F511N de vice.
THE MICROCHIP WEB SITE
Microchip provides on-line support via our web site at www.microchip.com. This web
site is used as a means to make files and information easily available to customers.
Accessible by using your favorite Internet browser, the web site contains the following
information:
•Product Support – Data sheets and errata, application notes and sample
programs, design resources, user’s guides and hardware support documents,
latest software releases and archived software
•General Technical Support – Frequently Asked Questions (FAQs), technical
support requests, on-line discussion groups, Microchip consultant program
member listing
•Business of Microchip – Product selector and ordering guides, latest Microchip
press releases, listing of seminars and events, listings of Microchi p sale s offices,
distributors and factory representatives
CUSTOMER SUPPORT
Users of Microchip products can receive assistance through several channels:
• Distributor or Representative
• Local Sales Office
• Field Application Engineer (FAE)
• Technical Support
Customers should contact their distributor , representative or field application engineer
(FAE) for support. Local sales offices are also available to help customers. A listing of
sales offices and locations is included in the back of this document.
Technical support is available through the web site at: http://support.microchip.com
DOCUMENT REVISION HISTORY
Revision A (December 2015)
• Initial Release of this Document.
MCP39F511N Power Monitor Demonstration Board User’s Guide
DS50002445A-page 10 2015 Microchip Technology Inc.
NOTES:
MCP39F511N POWER MONITOR
DEMONSTRATION BOARD
USER’S GUIDE
2015 Microchip Technology Inc. DS50002445A-page 11
Chapter 1. Product Overview
1.1 INTRODUCTION
The MCP39F511N Power Monitor Demonstration Board is a fully functional
dual-channel single-phase power and energy monitor. For each channel, the system
calculates active power, reactive power, RMS current, RMS voltage, active energy,
(both import and export), reactive energy and other typical power quantities for two
separate loads, as defined in the MCP39F511N data sheet.
The MCP39F511 Power Monitor Utility software is used to calibrate and monitor the
system, and can be used to create custom calibration setups. For most accuracy
requirements, only a single-point calibration is needed. The energy meter software
offers an automated step-by-step calibration process that can be used to quickly
calibrate energy meters.
This demonstration board uses the Power Monitor Utility Software for evaluation via a
USB connection to the board. A download link for this software can be found on the
evaluation board’s web page. For instructions on the use of this software, refer to the
software’s supporting documentation included within the application install package.
FIGURE 1-1: MCP39F511N Power Monitor Demonstration Board.
MCP39F511N Power Monitor Demonstration Board User’s Guide
DS50002445A-page 12 2015 Microchip Technology Inc.
1.2 WHAT THE M C P3 9F511N POWE R M ONITOR DEMONSTRATION BOARD KIT
INCLUDES
This MCP39F511N Power Monitor Demonstration Board kit includes:
• MCP39F511N Power Monitor Demonstration Board (ADM00706)
• AC Line Cable
• Two IEC-to-Female AC Load Cables
• Mini-USB Cabl e
• Important Informati on She et
MCP39F511N POWER MONITOR
DEMONSTRATION BOARD
USER’S GUIDE
2015 Microchip Technology Inc. DS50002445A-page 13
Chapter 2. Installation and Operation
2.1 GETTING STARTED
To use the MCP39F511N Power Monitor Demonstration Board, follow the steps
described in the sections below. The meter design uses a 5A load for calibration current
and a maximum current (IMAX) of 15A.
It is not recommended to put more than 15A through the AC plugs mounted on the
Printed Circuit Board (PCB).
To test the calibrated meter, the following connections can be made:
2.1.1 S tep 1: Wiring connections
Figure 2-1 identifies the line and two load connections of the MCP39F511N Power
Monitor Demonstration Board.
FIGURE 2-1: Connecting the MCP39F511N Power Monitor Demonstration
Board.
MCP39F511N Power Monitor Demonstration Board User’s Guide
DS50002445A-page 14 2015 Microchip Technology Inc.
2.1.2 Step 2: Connect line/load pow er to the meter (pow er the meter)
The meter will turn on when the line connection has between 90V to 220V connected.
One or two loads can be connected to the meter.
2.1.3 S tep 3: Connect the USB cable to a PC with the installed
MCP39F511N Power Monitor Utility sof tware
Select the appropriate COM port. If the meter is connected correctly, the connection
status in the bottom left corner of the software will display “Meter Connected”. If no
meter is found, the status will be “Meter Disconnected”. Check that the correct COM
port was selected and try again. Press the Start Icon to begin showing output data and
UART transmission between the PC and the MCP39F511N.
MCP39F511N POWER MONITOR
DEMONSTRATION BOARD
USER’S GUIDE
2015 Microchip Technology Inc. DS50002445A-page 15
Chapter 3. Hard ware Descri ption
FIGURE 3-1: MCP39F511N Power Monitor Demonstration Board Top View.
Legend:
1 = MCP39F511N 8 = Header for connection to external master
MCU (isolated)
2 = +9V DC Input (nonisolated ) 9 = Jumper selectio n for exte rnal MCU o r USB
(GUI) operation
3 = Current Sensing Shunt - Channel 1 10 = Isolation IC
4 = Current Sensing Shunt - Channel 2 11 = Switching AC/DC Power Supply
5 = Output LEDs for digital I/O 12 = 200:1 Vo ltage Divider for Voltage Input
6 = Headers for digital I/O testing (isolated) 13 = Jumper for DC or Switching AC/DC Supply
7 = USB Connection (isolated)
1
76
5
4
3
2
8
9
10
11
12
13
MCP39F511N Power Monitor Demonstration Board User’s Guide
DS50002445A-page 16 2015 Microchip Technology Inc.
FIGURE 3-2: MCP39F511N Power Monitor Demonstration Board Bottom View.
Legend:
14 = Line connection AC supply (80-230V)
15 = Load connection for Channel 1 (15 A maximum recommended current)
16 = Load connection for Channel 2 (15 A maximum recommended current)
14
15
16
Hardware De sc ription
2015 Microchip Technology Inc. DS50002445A-page 17
3.1 INPUT AND ANALOG FRONT END
The MCP39F51 1N Power Monitor Demonstration Board will operate from 80V to 230V .
At the bottom of the main board, there are the high-voltage line and neutral
connections. The shunts sit on the neutral or low-side of a two-wire system. The board
comes populated with two surface mount 2 m shunts.
The line side of the two-wire system goes into a resistive divider on the voltage channel
input, along with a DC offset added from VDD. Anti-aliasing low-pass filters are
included. The voltage channel uses two 499 k resistors and the additional
components to achieve a divider ratio of approximately 236:1. For a line voltage of
236 VRMS, the channel 1 input signal size will be 1VRMS with a DC offset voltage of
DVDD/2 per the schematic snippet below.
FIGURE 3-3: Analog Front-End Circuitry.
Note that all of the analog circuitry associated with this part of the circuit is connected
to the analog ground plane (AGND).
I1-
I1+
V+
N
L
33 nF
33 nF
1k
1k
5.1 k
499 k
33 nF
499 k
-
+
2m
LOAD
-
+
2m
LOAD
I2-
33 nF
1k
I2+
33 nF
1k
N
L
47µF
51 k
51 k
+3.3V
MCP39F511N
+33 nF
1k
MCP39F511N Power Monitor Demonstration Board User’s Guide
DS50002445A-page 18 2015 Microchip Technology Inc.
3.2 POWER SUP PLY CIRCUIT
The power supply circuit for the MCP39F511N Power Monitor Demonstration Board is
shown in Figure 3-4.
FIGURE 3-4: Power Supply Circuit with Option for AC/DC Switching Supply from Mains or DC
Supply.
150 FB 47
4.7 µF
1
3
2
0.1 µF
+3.3 VD
+
10 µF
IN OUT
GND
MCP1754
0.1 µF
AGND
GNDB GNDB
GNDB GNDB GNDB GNDB
NT
‘0.1 µF 10 µF
AGND AGND
+3.3 VA 33
+
GNDB
4.7 µF
BP FB
DS
S
S
S
0.1 µF
GNDB
+
GNDB
100 µF
GNDB
8.25V
47
150 FB
DC SUPPLY
AC/DC SUPPLYAC/DC SUPPLY JP2
8.25V
LNK304 8.2K
2.05K
10 µF
2.05K
L
N
1mH
GNDB
MCP39F511N POWER MONITOR
DEMONSTRATION BOARD
USER’S GUIDE
2015 Microchip Technology Inc. DS50002445A-page 19
Appendix A. Schematic and Layouts
A.1 INTRODUCTION
This appendix contains the following schematics and layouts for of the MCP39F511N
Power Monitor Demonstration Board:
• Board – Schematic
•Board – Schematic (Con tinued)
•Board – Top Silk
•Board – Top Copper and Silk
•Board – Top Copper
• Board – Bottom Copper
• Board – Bottom Copper and Silk
• Board – Bottom Silk
A.2 SCHEMATICS AND PCB LAYOUT
The layer order is shown in Figure A-1.
FIGURE A-1: Layer Order.
Top Layer
Bottom Layer
MCP39F5 11N Power Monitor Demonstration Bo ard User’s Guide
DS50002445A-page 20 2015 Microchip Technology Inc.
A.3 BOARD – SCHEMATIC
$*1'
/LQHVKXQW
)%
)%
&XUUHQWFKDQQHO
1(875$/B287
1(875$/
5


5
038B7;
038B5;
*1'%
'
9
X)

&
733$'3&%[
73

N

5
$
$*1'
$
9
X)

&
$*1'
'
9
X)

&
$*1'
$
0&3)1
'5 
1&
1&
&20021B% 
26&,
26&2
9 
1&
1&
(9(17
 5(6(7
$9''

=&' 
3:0 
(9(17 
,

,

,

,

$*1'

8$57B7; 
8$57B5;
5(),1287

'*1'

'9''

'*1'

0&/5 
&20021B$
(3

8
N 

5
*1'%
N


5
N


5
X)
9

&
X)
9

&
'
$*1'
X)
9

&
3:0
(9(17
(9(17
=&'
92/7$*(B$'&B,1
$*1'
/LQHVKXQW
&XUUHQWFKDQQHO
)%
)%
1(875$/B287
1(875$/
5


5
N


5
N


5
X)
9

&
X)
9

&
038B0&/5
Schematic and Layouts
2015 Microchip Technology Inc. DS50002445A-page 21
A.4 BOARD – SCHEMATIC ( CONTINUED)
+9V IN
POWER
MRA4005
D3
AGND
3.3A3.3D
GNDB
LINE
NEUTRAL
VOLTAGE DIVIDER
GNDB
+9V IN
FB3
GNDB GNDB GNDBGNDB
FB4
25V
0.1uF
0603
C26
25V
0.1uF
0603
C27
25V
0.1uF
0603
C23
AGND AGND
LINE
NEUTRAL NEUTRAL_OUT1
IEC Outlet C13
G
2
N
3
L
1
G
N
L
J2
[SHUNT]
DISC 14mm
S14K275
MOV1
GND_ISO
MPU_RX1
MPU_TX1
3.3D
3.3D
GNDB
GNDB
GND_ISO
5VUSB
Isolation
Barrier
25V
0.1uF
0603
C28
25V
0.1uF
0603
C29
GND_ISO
GND_ISO
5VUSB
33R
0603
5%
R20
HDR-2.54 Male 1x4
Yes
1234
J5
GND_ISO
5VUSB
ACSL-7210
VDD1
1
VOA
2
VIB
3
GND1
4
VDD2 8
VIA 7
VOB 6
GND2 5
V
DD
1
VOA
V
IB
G
ND
1
V
DD2
V
IA
VO
B
G
ND2
U6
100R
0603
5%
R32
100R
0603
5%
R31
100R
0603
5%
R22
100R
0603
5%
R21
5VUSB
External isolated serial comm
EXT_RX
EXT_TX
MRA4005
D2
LNK304
S8
S6
BP
1
D
4S7
FB 2
S
S
BP
D
S
FB
S5
U3
0.1uF
25V
0603
C17
470R
2512
5%
R4
470R
2512
5%
R10
ES1G
D1
MRA4005
D4
100uF
16V
AL-D
C6
8.2k
0603
1%
R17
2.05k
0603
1%
R16
GNDB
4.7uF
25V
0805
C18
10uF
25V
1206
C24
2.05k
0603
1%
R12
USB_N
USB_P
0.47uF
6.3V
0603
C32
RX
TX
RESET
10k
0603
1%
R35
VUSB
USB_N
USB_P
RX
TX
4.7uF
10V
0805
C30
GND_ISO
5VUSB
5VUSB
5VUSB
10uF
10V
0805
C25
10uF
10V
0805
C22
4.7uF
400V
RAD_P3.5D8H13
C10
4.7uF
400V
RAD_P3.5D8H13
C11
1mH
L1
1mH
L2
USB MINI-B Female
ID 4
VBUS 1
GND 5
D- 2
D+ 3
0
J10
GND_ISO
HDR-2.54 Male 1x3
1
1
2
3
JP3
HDR-2.54 Male 1x3
123
JP2
25V
0.1uF
0603
C31
IEC Inlet C14
G2
N3
L1
G
N
L
J1
0.01uF
330V
RAD-P10L13W4H9
C1
MCP2221
VDD
1
GP0
2
GP1
3
RST
4
UART RX
5
UART TX
6
GP2
7GP3 8
SDA 9
SCL 10
VUSB 11
D- 12
D+ 13
VSS 14
VDD
G
P
0
G
P1
RS
T
UA
R
T RX
UA
R
T TX
G
P
2
G
P3
S
D
A
SC
L
VU
S
B
D
-
D
+
VSS
U11
MCP1754S/3.3V
VOUT 3
VIN
1
GND
2
VOUT
V
IN
GND
V
U5
POWER 2.5mm
2
3
1
J3
S
Vin
Net Tie
NT1
RX_LED
TX_LED
21
4 3
GREEN
RED
RED, GREEN
LD5
RX_LED
TX_LED
5VUSB
1k
0603
1%
R34
1k
0603
1%
R33
GND_ISO
GND_ISO
GND_PWR
+8.25V
EARTH
IEC Outlet C13
G
2
N
3
L
1
G
N
L
J4
LINE
NEUTRAL_OUT2
[SHUNT]
NEUTRAL
MCP39F511N Power Monitor Demonstration Board User’s Guide
DS50002445A-page 22 2015 Microchip Technology Inc.
A.5 BOARD – TO P SILK
Schem atic and Layouts
2015 Microchip Technology Inc. DS50002445A-page 23
A.6 BOARD – TOP COPPER AND SILK
MCP39F511N Power Monitor Demonstration Board User’s Guide
DS50002445A-page 24 2015 Microchip Technology Inc.
A.7 BOARD – TO P COPPER
Schem atic and Layouts
2015 Microchip Technology Inc. DS50002445A-page 25
A.8 BOARD – BOTTOM COPPER
MCP39F511N Power Monitor Demonstration Board User’s Guide
DS50002445A-page 26 2015 Microchip Technology Inc.
A.9 BOARD – BOTTOM COPPER AND SILK
Schem atic and Layouts
2015 Microchip Technology Inc. DS50002445A-page 27
A.10 BOARD – BOTTOM SILK
MCP39F511N Power Monitor Demonstration Board User’s Guide
DS50002445A-page 28 2015 Microchip Technology Inc.
NOTES:
MCP39F511N POWER MONITOR
DEMONSTRATION BOARD
USER’S GUIDE
2015 Microchip Technology Inc. DS50002445A-page 29
Appendix B. Bill of Materials (BOM)
TABLE B-1: BILL OF MATERIALS (BOM)
Qty. Reference Description Manufacturer Part Number
1 C1 Capacitor film 0.01 µF 330V 20% RAD
P10L13W4H9 EPCOS AG B32911A3103M
6 C2, C3, C4,
C5, C7, C15 Capacitor ceramic 0.033 µF 50V 10%
X7R SMD 0603 TDK Corporati on C1608X7 R1H 33 3K
1 C6 Capacitor alum. 100 µF 16V 20% SMD D Nichicon Corporation UWX1C101MCL1GB
3 C8, C22,
C25 Capacitor ceramic 10 µF 10V 10% X7R
SMD 0805 TDK Corporati on C2012X7R1A10 6K125AC
10 C9, C12,
C13, C17,
C23, C26,
C27, C28,
C29, C31
Capacitor ceramic 0.1 µF 25V 10% X7R
SMD 0603 Murata Electronics GRM188R71E104KA01D
2 C10, C11 Capacitor alum. 4.7 µF 400V 20%
RAD_P3.5D8H13 Nichicon Corporation UVC2G4 R7M PD1TD
1 C14 Capacitor tantalum 47 µF 4V 10%
2.6Ohm SMD A AVX Corporation TAJA476K004RNJ
1 C18 Capacitor ceramic 4.7 µF 25V 10% X7R
SMD 0805 TDK Corporati on C2012X7R1E475K125AB
1 C24 Capacitor ceramic 10 µF 25V 10% X7R
SMD 1206 Taiyo Yuden Co., Ltd. TMK316B7106KL-TD
1 C30 Capacitor ceramic 4.7 µF 10V 10% X5R
SMD 0805 Taiyo Yuden Co., Ltd. LMK212BJ475KD-T
1 C32 Cap acitor ceram ic 0.47 µF 6.3V 1 0% X5R
SMD 0603 Murata Electronics®GRM188R60J474KA01D
1 CBL1 Mech. HW cable USB-A male-to-mini
USB-B male 3 ft black Katerno 10UM-02103BK
2 CBL2, CBL3 Mech. HW 1ft 18 AWG monitor power
adapter cord (NEMA 5-15R to
IEC320C14)
Katerno 152360
1 CBL4 Mech. HW 6 ft 16 AWG universal power
cord (IEC320C 13 to NEMA 5-15P) Katerno 153879
1 D1 Dio de rectifier ES1G 1.25V 1A 400V SMD
DO-214AC_SMA Diodes® Incorporated ES1G-13-F
3 D2, D3, D4 Diode rectifier MRA4005 1.1V 1A 600V
DO-214AC_SMA ON Semiconductor®MRA4005T3G
1 ENCLO-
SURE1 Mech. enclosure slim ref. side port meter Tech-Demos.com TD03-0102R0
4FB1, FB2,
FB5, FB6 Ferrite 800mA 0.15R SMD 0805 Laird Technologies®LI0805H151R-10
2 FB3, FB4 Ferrite 7A RAD P5L5.3D3.8 Murata Electronics
North America, Inc. BL02RN1R2M2B
Note 1: The components listed in this Bill of Materials are representative of the PCB assembly. The released
BOM used in manufacturing uses all RoHS-compliant components.
Bill of Mater ials (BOM)
2015 Microchip Technology Inc. DS50002445A-page 30
1 J1 Conn. IEC 250V 15A inlet C14 TH R/A SCHURTER Inc. GSP1.9103.1
2 J2, J4 Conn. IEC 250V 15A outlet C13 TH R/A SCHURTER Inc. 6182.0033
1 J3 Conn. pwr. 2.5mm 5.5mm switch TH R/A CUI Inc. PJ-002B
1 J5 Conn. header-2.54 male 1x4 tin 5.84 MH
TH vert. FCI 68002-404HLF
4 J6, J7, J8, J9 Conn. header-2.54 male 1x2 tin 6.10 MH
TH vert. Molex®0022284020
1 J10 Conn. USB mini-B female TH vert. Molex® Connector
Corporation 500075-1517
2 JP2, JP3 Conn. header-2.54 male 1x3 gold 5.84
MH TH vert. FCI 68000-103HLF
2 JP4, JP5 Mech. HW jumper 2.54 mm 1x2 handle
gold TE Connectivity, Ltd. 881545-2
2 L1, L2 Inductor 1 mH 240 mA 20% SMD
L6W6H2.4 Coilcraft®LPS6225-105MRB
1 LABEL1 Label, NEED HELP WITH ASSY/SERIAL
1 LABEL2 Mech. HW LABEL HIGH VOLTAGE Panduit Corp. PLD-56
4LD1, LD2,
LD3, LD4 Diode LED red 1.95V 30 mA 700 MCD
clear SMD 0603 Kingbright Electronic
Co., Ltd. APTD1608SURCK
1 LD5 Diode LED bi. red, green 1.95V, 2.1V 30
mA 0805 Kingbright Corp. APHBM2012SURKCGKC
1 MOV1 Resistor varistor 275V 130J TH disc 14 mm EPCOS AG S14K275E2K1
6 NUT1,
NUT2,
NUT3,
NUT4,
NUT5, NUT6
Hex. nut 0.217" steel M3 Keystone Electronics
Corp. 4708
1 PCB1 Printed Circuit Board – MCP39F501
Power Monitor Demonstration Board Microchip Technology
Inc. 04-10480-1
2 R1, R9 R esis tor shu nt MF 0.002R 1% 2W 2512 S tackpol e Electronics,
Inc. CSNL2512FT2L00
2 R2, R3 Res. TKF 499k 1% 3/4W SMD 2010 Vishay/Dale CRCW2010499KFKEF
2 R4, R10 Res. TKF 470R 5% 1W SMD 2512 Panasonic® - ECG ERJ-1TYJ471U
15 R5, R6, R7,
R11, R18,
R23, R24,
R25, R26,
R27, R28,
R29, R30,
R33, R34
Res. TKF 1k 1% 1/10W SMD 0603 Panasonic - ECG ERJ-3EKF1001V
1 R8 Res. TKF 5.1k 1% 1/10W SMD 0603 Panasonic - ECG ERJ-3EKF5101V
2 R12, R16 Res. TKF 2.05k 1% 1/10W SMD 0603 Yageo Corporation RC0603FR-072K05L
2 R13, R14 Res. TKF 4.7k 1% 1/10W SMD 0603 Panasonic - ECG ERJ-3EKF4701V
2 R15, R19 Res. TKF 51k 1% 1/10W SMD 0603 Panasonic - ECG ERJ-3EKF5102V
1 R17 Res. TKF 8.2k 1% 1/10W SMD 0603 Panasonic - ECG ERJ-3EKF8201V
1 R20 Res. TKF 33R 5% 1/10W SMD 0603 Yageo Corporation 9 C06031A33R0JLHFT
4R21, R22,
R31, R32 Res. TKF 100R 5% 1/10W SMD 0603 Vishay/Dale CRCW0603100RJNEA
TABLE B-1: BILL OF MATERIALS (BOM) (CONTINUED)
Qty. Reference Description Manufacturer Part Number
Note 1: The components listed in this Bill of Materials are representative of the PCB assembly. The released
BOM used in manufacturing uses all RoHS-compliant components.
Bill of Mater ials (BOM)
2015 Microchip Technology Inc. DS50002445A-page 31
1 R35 Resistor TKF 10k 1% 1/10W SMD 0603 Panasonic - ECG ERJ-3EKF1002V
6 SCR1,
SCR2,
SCR3,
SCR4,
SCR5, SCR6
Machine sc rew pan P hillips M3 Digi-Key® Electronics 335-1156-ND
4TP1, TP2,
TP4, TP5 Conn. TP pin tin TH Harwin Plc. H2121-01
1 U1 Microchip Analog Energy Measurement
4000:1 MCP39F511N-E/MQ QFN-28 Microchip Technology
Inc. MCP39F511N-E/MQ
1 U3 IC switcher LNK304 SO-8C Power Integrations™ LNK304DG-TL
1 U5 Microchip Analog LDO 3.3V
MCP1754ST-3302E/DB SOT-223-3 Microchip Technology
Inc. MCP1754ST-3302E/DB
1 U6 IC photo ACSL-7210-06RE Bi-Dir. 3.3V
and 5V SOIC-8 Avago Technologies ACSL-7210-06RE
4 U7, U8, U9,
U10 IC Photo HCPL-181 4-SMD Avago Technologies HCPL-181-00CE
1 U11 Microchi p interface USB I2C U ART
MCP2221-I/ST TSSOP-14 Microchip Technology
Inc. MCP2221-I/ST
TABLE B-1: BILL OF MATERIALS (BOM) (CONTINUED)
Qty. Reference Description Manufacturer Part Number
Note 1: The components listed in this Bill of Materials are representative of the PCB assembly. The released
BOM used in manufacturing uses all RoHS-compliant components.
DS50002445A-page 32 2015 Microchip Technology Inc.
AMERICAS
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://www.microchip.com/
support
Web Address:
www.microchip.com
Atlanta
Duluth, GA
Tel: 678-957-9614
Fax: 678-957-1455
Austin, TX
Tel: 512-257-3370
Boston
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Chicago
Itasc a , IL
Tel: 630-285-0071
Fax: 630-285-0075
Cleveland
Independence, OH
Tel: 216-447-0464
Fax: 216-447-0643
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
Detroit
Novi, MI
Tel: 248-848-4000
Houston, TX
Tel: 281-894-5983
Indianapolis
Noblesville, IN
Tel: 317-773-8323
Fax: 317-773-5453
Los A n ge les
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
New York, NY
Tel: 631-435-6000
San Jose, CA
Tel: 408-735-9110
Canada - Toronto
Tel: 905-673-0699
Fax: 905-673-6509
ASIA/PACIFIC
Asia Pacific Office
Suites 3707-14, 37th Floor
Tower 6, The Gateway
Harbour City, Kowloon
Hong Kong
Tel: 852-2943-5100
Fax: 852-2401-3431
Australia - Sydney
Tel: 61-2-9868-6733
Fax: 61-2-9868-6755
China - Beijing
Tel: 86-10-8569-7000
Fax: 86-10-8528-2104
China - Chengdu
Tel: 86-28-8665-5511
Fax: 86-28-8665-7889
China - Chongqing
Tel: 86-23-8980-9588
Fax: 86-23-8980-9500
China - Dongguan
Tel: 86-769-8702-9880
China - Hangzhou
Tel: 86-571-8792-8115
Fax: 86-571-8792-8116
China - Hong Kong SAR
Tel: 852-2943-5100
Fax: 852-2401-3431
China - Nanjing
Tel: 86-25-8473-2460
Fax: 86-25-8473-2470
China - Qingdao
Tel: 86-532-8502-7355
Fax: 86-532-8502-7205
China - Shanghai
Tel: 86-21-5407-5533
Fax: 86-21-5407-5066
China - Shenyang
Tel: 86-24-2334-2829
Fax: 86-24-2334-2393
China - Shenzhen
Tel: 86-755-8864-2200
Fax: 86-755-8203-1760
China - Wuhan
Tel: 86-27-5980-5300
Fax: 86-27-5980-5118
China - Xian
Tel: 86-29-8833-7252
Fax: 86-29-8833-7256
ASIA/PACIFIC
China - Xiamen
Tel: 86-592-2388138
Fax: 86-592-2388130
China - Zhuhai
Tel: 86-756-3210040
Fax: 86-756-3210049
India - Bangalore
Tel: 91-80-3090-4444
Fax: 91-80-3090-4123
India - New Delhi
Tel: 91-11-4160-8631
Fax: 91-11 - 4160-8632
India - Pune
Tel: 91-20-3019-1500
Japan - Osaka
Tel: 81-6-6152-7160
Fax: 81-6-6152-9310
Japan - Tokyo
Tel: 81-3-6880- 3770
Fax: 81-3-6880-3771
Korea - Daegu
Tel: 82-53-744-4301
Fax: 82-53-744-4302
Korea - Seoul
Tel: 82-2-554-7200
Fax: 82-2-558-5932 or
82-2-558-5934
Malaysia - Kuala Lumpur
Tel: 60-3-6201-9857
Fax: 60-3-6201-9859
Malaysia - Penang
Tel: 60-4-227-8870
Fax: 60-4-227-4068
Philippines - Manila
Tel: 63-2-634-9065
Fax: 63-2-634-9069
Singapore
Tel: 65-6334-8870
Fax: 65-6334-8850
Taiwan - Hsin Chu
Tel: 886-3-5778-366
Fax: 886-3-5770-955
Taiwan - Kaohsiung
Tel: 886-7-213-7828
Taiwan - Taipei
Tel: 886-2-2508-8600
Fax: 886-2-2508-0102
Thailand - Bangkok
Tel: 66-2-694-1351
Fax: 66-2-694-1350
EUROPE
Austria - Wels
Tel: 43-7242-2244-39
Fax: 43-7242-2244-393
Denmark - Cop e nha gen
Tel: 45-4450-2828
Fax: 45-4485-2829
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
Germany - Dusseldorf
Tel: 49-2129-3766400
Germany - Karlsruhe
Tel: 49-721-625370
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-14 4-44
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Italy - Venice
Tel: 39-049-7625286
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Poland - Wars a w
Tel: 48-22-3325737
Spai n - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08 -91
Sweden - Stockholm
Tel: 46-8-5090-4654
UK - Wokingham
Tel: 44-118-921- 5800
Fax: 44-118-921-5820
Worldwide Sales and Service
07/14/15