TYPES TIPS21, TIP522 P-N-P SILICON POWER TRANSISTORS FOR POWER-AMPLIFIER AND HIGH-SPEED-SWITCHING APPLICATIONS e 200V Min ViBR)CEO e 2-A Rated Continuous Collector Current @ 20 Watts at 100C Case Temperature (TIP521) e 4 Watts at 100C Case Temperature (TIP522) e Min ft of 50 MHz at5V,0.2A mechanical data TIP521 ALL TERMINALS ARE INSULATED FROM THE CASE SEATING PLANE Temmunars 0.806 ax DIA BEM cue BE 18 on 1S IWLBS . ze ~) OP NOM PLACES i ae (f hg se vener ajo | 94B cas | [ oom. 1 A St aren 2 9.070 o COLLECTOR: 076 03a 9879 O18. 2485 976 TERMINAL 3 oan Ho ALL JEDEC TO-59 DIMENSIONS ANO NOTES ARE APPLICABLE NOTES: A, Within this dimension, case diameter may vary. 8. Position of terminals with raspect to hexagon is not contrailed. C. The case temperature may be measured anywhere on the seating plane within 0,125 inch of the stud, . All dimensions are in inches unless otherwise specifled. TIP522 THE COLLECTOR IS IN ELECTRICAL CONTACT WITH THE CASE op MIN CASE TEMPERATURE MEASUREMENT POINT BR os a ALL DIMENSIONS ARE IN INCHES orn Oa DNA UNLESS OTHERWISE SPECIFIED be ees ou 34 EADS (0100 MIN Be 1 = a AY ova | DETAILS OF OUTLINE IN at THIS ZONE OPTIONAL SEATING PLANE ALL JEDEC TO-39 DIMENSIONS ANO NOTES ARE APPLICABLE absolute maximum ratings at 25C case temperature (unless otherwise noted) TIP521 TIPS22 Collector-Base Voltage os ee ee ee ee $200 Ve Collector-Emitter Voltage (See Note y Be ee ee ee 200 Ve Emitter-Base Voltage 2 6 1 eB Ve Continuous Collector Current 26, ee 2 A Peak Collector Current (SeeNote2) 2 2 2 Ww ee BAe Continuous Base Current . ee ee ee 0.6 Ae Safe Operating Area at (or below] 100 Case Temperature . wae eee See Figure 1 Continuous Device Dissipation at (or below) 100C Case Temperature (See Note 3) woe ae 20 W 4aw Continuous Device Dissipation at (or below) 25C Free-Air Temperature (See Note 4)... . 2wW 1W Operating Collector Junction Temperature Range... . 2... ee ee ee ew 665C to 200C Storage Temperature Range ... . Coe ee ee ee ee) 665C to 200C Lead or Terminal Temperature 1/16 Inch from Case for 10 Seconds. ee ee eee = 300C NOTES: 1, This value applies when tha base-emitter diode is open-circuited. 2. This value appties for ty, < 0.3 ms, duty cycle < 10%. 3. Derate linearty to 200C case temperature at the rate of 200 mW/C for TIP521 and 40 mW/ for TIP522. 4, Derate linearly to 200C free-air temperature at the rate of 11.4 mW/C for TIP521 and 5.7 MW/C for TIP522, TEXAS INSTRUMENTS 2-249 2-250 TYPES TIP521, TIPS22 P-N-P SILICON POWER TRANSISTORS electrical characteristics at 25C case temperature (unless otherwise noted) Forward Current Transfer Ratio PARAMETER TEST CONDITIONS MIN MAX | UNIT VipR)cea Collector-Emitter Breakdown Voltage Ic =-30mA, Ig =O, See Note S ~200 Vv cro Collector Cutoff Current Vce=100V, Ip=0 200 BA Vce =-200V, Vee =0 -1 ices Collector Cutoff Current von 100 V or Ta= 150C 2 mA CE* VBE=% c= = Vep7-25V, Ic=0 100 uA lEgo Emitter Cutoff Current Ven ZV ic a) 4 mA . . VoE=-4V, Ic =-1A, See Notes 5 and 6 20 100 hre Static Forward Current Transfer Ratio Vv av 1 2A See Notes 5 and 6 5 CET TaN, c=7-4", an VBE Base-Emitter Voltage Voce = -4V, \o=-2A, See Notes 5 and 6 2.2 tp=0.1A, lc =-1A, See Notes 5 and 6 ~1.5 VCE(sat) Collector-Emitter Saturation Voltage is = 205A ic TTA See Notes 5 and 6 25 v Smali-Signal Common-Emitter h VceE=-5V, Ie =-0.2A, f=1kH fe Forward Current Transfer Ratio ce 2 20 Small-Signal Co -E mitt bee anal vommon Smiter Voe=-5V, I=-0.2A, f=5MHz 10 NOTES: 5. These parameters must be measured using pulse techniques. ty, = 300 us, duty cycla < 2%. 6. These parameters are neasured with voltage-sensing contacts separate from the current-carrying contacts and located within 0.125 inch from the device body. thermal characteristics --0.04 PARAMETER TIP521 TIP522 UNIT MAX MAX Resc Junction-to-Case Therrnal Resistance 5 25 CAN Raia Junction-to-Free-Air Thermal Resistance 87.5 175 MAXIMUM SAFE OPERATING AREA MAXIMUM COLLECTOR CURRENT vs 40 COLLECTOR-EMITTER VOLTAGE 7 To < 100C t 4 D-C Operation 1 5 -2 So -t 5 -0.7 TIP521 3 04 8 0.2 -0.1 % --0.0 7 2 --0.02 --0.01 -1 -4 VceECollector-Emitter VoltageV FIGURE 1 -10 ~40 100 400-1000 TEXAS INSTRUMENTS TEXAS INSTRUMENTS RESERVES THE RIGHT TO MAKE CHANGES AT ANY TIME IN ORDER TO IMPROVE DESIGN AND TO SUPPLY THE BEST PRODUCT POSSIBLE