PART NUMBER: 105FPA850K SNUBBER Parts are RoHS compliant Date code when parts became RoHS: 17 FEATURES APPLICATIONS Axial lead, impregnated film/fail polypropylene, high voltage, high current, high Power semiconductors, snubbers, Energy conversion corona onset voltage ELECTRICAL SPECIFICATIONS Capacitance: 1 uF Dissipation Factor: 0.0005 Max at 1000 Hz and 25C Temperature Coefficient: -200 PPM/C: -100 PPMPC, 100 PPMPC Ripple Current: 10 A at 100 kHz and 70C ESR: 7.6 milliQhms (typical) at 100 kHz and 25C Self Inductance: 1 Nanohenries maximum per mm of body length and lead length dvdt: 900 Vis Terminal to Terminal Dielectric strength: 1.6 times the rated DC voltage when applied between the terminals for 2 seconds Insulation Resistance (Terminal to Terminal): 30000 Megohms MINIMUM after 500 Volts DC is applied for 60 seconds at 20C Reliability: Load Life: Not Specified hours at 55C with 0% of rated voltage Capacitance Change: 0 of initially measured value D.F. Change: 0 of maximum specified value .R. Change: 0 of minimum specified value PHYSICAL DIMENSIONS Diameter (D): 25 mm, 0.5 mm Length (L): 55 mm, 1 mm Lead Finish: Matte Tin Tolerance: -10 % . +10 % Temperature Range: -25C to +65C Above 65C the rated (DC/AC) voltage must be derated at per N/AC WVDC: 850 Volts DC SVDC: N/A Volts DC VAC: 450 Volts AC Terminal to case Dielectric strength: 2 times the rated DC voltage when applied between the terminals far 2~5 seconds Insulation resistance (Terminal to Case): N/A Megohms MINIMUM after 500 Volts DC is applied for 60 seconds at 20C Lead Spacing (5): mm, +/-0.5 mm Lead Diameter (d): 1.2 mm, +/-0.05 mm Lead Length (LL): 30mm, +/- MIN mm ; : ic ' D ou a i ILLINOIS CAPACITOR, INC. 3757 W. Touhy Ave. Lincolnwood, L60712 (847}675-1760 FAX (247}673-2050 llinois Capacitor (HK) Lid., Tel 85227930931, Fax: 85227930731, weeve.illcap.com.hk 2009 lllinois Capacitor