Product Preview
ZLE70250
Application Development Kit for the ULP Sub-GHz RF Transceiver
Microsemi’s ZLE70250 Application Development Kit (ADK) enables rapid evaluation,
prototyping, and development of radio frequency (RF) telemetry systems that use
the company’s ZL70250 ultra-low-power (ULP) Industrial Scientific and Medical
(ISM) transceiver technology.
The ZLE70250 ADK combines hardware and software to create an end-to-end ISM
communication system using the ZL70250, operating in either the 863- to 870-MHz
band (EU) or the 902- to 928-MHz band (US) with only 2 mA peak current draw at a
range of up to 100 meters.
The kit demonstrates the ZL70250’s exceptional energy efficiency, high integration,
and high data rate capable of supporting continuous monitoring and voice
applications.
Using the ZLE70250 ADK, customers can quickly create their own custom board
designs and use Microsemi software as a starting point for software development
for specific ZL70250-enabled ISM-band RF telemetry systems. We also offer the
Z-Star protocol stack, which supports wireless sensor networks (see the Product
Brief for the ZL70250 WSN Evaluation Platform with Z-Star Protocol).
Supports Rapid Product
Development of RF Telemetry
Systems
• ADK includes ZL70250 transceiver, enables
industry’s lowest peak power and highest
efficiency RF communication solutions
• Common application microcontroller enables
rapid integration of customer-specific designs
• Optimized matching circuit to standard 50 Ω and
provided antenna showcases a 2-mA RF system
solution with a range up to 100 meters
• Extensive hardware documentation including
board schematics, layout, Gerber files, and Bill
of Material (BOM) enables faster development of
customer-specific systems
• Software (written in C) with thoroughly
commented source code available to support
product development
• Periodic software upgrades to enhance
functionality and support advanced features
• Out-of-the-box solution—all hardware and
software provided to operate the ADK, only
requires PC to run graphical user interface (GUI)
software
Ordering Information
The ZLE70250 ADK is available for qualified
customers (order number ZLE70250BADA). For
ordering information, contact Microsemi’s Medical
Product Group sales (http://www.microsemi.com/
cmpg/hs/sales_medicalproducts.htm). For detailed
information on Microsemi’s ISM-band radio
transceiver technology, please refer to our website
(http://www.microsemi.com/cmpg/hs/
82_ZL70250.htm).
• Medical telemetry
• Wireless Sensor Networks (WSNs)
• Wireless blood glucose monitoring
• Voice communication
• Applications relying on energy harvesting or
battery miniaturization
• Remote controls
Applications
The ZLE70250 ADK facilitates rapid development and evaluation of ZL70250-based RF
communication systems used in power-critical applications including:
Microsemi Corporate Headquarters
One Enterprise, Aliso Viejo CA 92656 USA
Within the USA: +1 (949) 380-610 0
Sales: +1 (949) 380-6136
Fax: +1 (949) 215-4996
Microsemi Corporation (NASDAQ: MSCC) offers a comprehensive portfolio of semiconductor
solutions for: aerospace, defense and security; enterprise and communications; and industrial
and alternative energy markets. Products include high-performance, high-reliability analog and
RF devices, mixed signal and RF integrated circuits, customizable SoCs, FPGAs, and complete
subsystems. Microsemi is headquartered in Aliso Viejo, Calif. Learn more at www.microsemi.com.
©2012 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are trademarks of Microsemi Corporation. All other trademarks and
service marks are the property of their respective owners.
Publication Number: 8ZS195 ZLR70250-PP/144615-1/7.12
Application Development Kit for the ULP Sub-GHz RF Transceiver
ZLE70250
The ZLE70250 ADK includes all hardware and software required to
quickly and easily design RF communication systems based on the
ZL70250 ULP RF transceiver.
Application Development Platform (ADP100) board: Bridge
board with integrated USB2.0 support to allow for interfacing between a
PC running the ADK software and a Microsemi RF evaluation mezzanine
board. The ADP100 provides two programmable power supplies with
measurement capability to its mezzanine board. The USB-rechargeable
Li-Ion battery allows the ADP100 and its mezzanine board to run
disconnected from the host PC for hours.
Evaluation RF Mezzanine (ERM250) board: Mezzanine
board that plugs into an ADP and provides all capabilities to develop a
ZL70250-based wireless sensor. The RF section includes the ZL70250
clocked at 24.576 MHz, probe points of key digital and analog signals,
a matching network for 863- to 928-MHz operation, and an SMA-based
interface to a standard 50-Ω antenna. A commonly used microcontroller
with JTAG debug interface controls the ZL70250. A light sensor, a
temperature sensor, and a 32-kHz RTC crystal connected to the
microcontroller provide all the functionality required for the development
of a wireless sensor. The ERM250 can either be powered by the ADP100
for convenience or by its own on-board power supply from any 2.7- to
10-volt source, including a battery (a CR2032 holder is provided on
the back of the board) or an energy harvester, to allow for standalone
operation.
Programmer Cable Adapter (PCA100): Adapter board to enable
programming/code download and debugger support to the ADP and
application microcontrollers.
Antennas: A pair of 868-MHz and 915-MHz whip antennas are
provided in the kit.
Embedded Firmware:
For the ADP100 and ERM250, enables
setup and control of the ZL70250 residing on the ERM250. It runs on
each board’s commonly used microcontroller. This example code may be
modified for specific customer systems incorporating the ZL70250 device.
PC Software: Software compatible with Windows-based PCs
included on CD-ROM in the ADK with an easy-to-run installation
executable. The GUI application provides a user-friendly visual interface
for controlling and demonstrating the capabilities of a ZL70250-enabled
RF system including trim and tune, Clear Channel Assessment (CCA), Bit
Error Rate (BER), and missed packets, as well as accessing ZL70250-
specific registers. It communicates through a well-defined application
programming interface (API) realized through a Windows DLL to the
embedded firmware running within the application microcontroller on the
ERM250 via the ADP100 board.
Full Documentation: Provided on CD-ROM, includes ADK Getting
Started Guide, Source Code Overview, and Board-Level Documents
(schematics, layouts, Gerbers, and BOM for all included boards).
Embedded
SW (ADP
controller)
GUI
API (DLL)
Embedded
SW (App
controller)
SPISPI
SPI
USB
2WI2WI
ZL70250
Embedded
SW (App
controller)
ZL70250
Standalone ModuleGUI Controlled Module
Matching
network
RTC Xtal
Temp
sensor
Light
sensor
Matching
network
RTC Xtal
Temp
sensor
Light
sensor
Pwr
measure-
ment
Battery
(CR2032)
ADP
Board
ERM
Board
ERM
Board
PC (Windows 7/XP)
Kit contents:
2 ADP100 boards
2 ERM250 boards
1 PCA100 board
2 868-MHz antennas
2 915-MHz antennas
2 USB cables
1 CD-ROM
