BlueCore 01b - Cambridge Silicon Radio

BlueCore 01b

BlueCore 01b Product Data Sheet

bc01b-ds-003d

Product Data Sheet

Production Information

Single Chip Bluetooth Device

Product Data Sheet For:

BC01b-USB

(USB and UART version)

(BGA Packaging)

BC01b-URT

(UART only version)

(BGA Packaging)

BC01bv-USB

(USB and UART version)

(VFBGA Packaging)

BC01bv-URT

(UART only version)

(VFBGA Packaging)

BlueCore01b is a single chip radio and baseband IC

for Bluetooth 2.4GHz radios, and is implemented in

CMOS technology.

When used with external flash containing the CSR

Bluetooth software stack, it provides a fully compliant

Bluetooth system for data and voice communications.

General Description

Figure 1: BlueCore01b Block Diagram

RAM

DSP

µP

I/O

2.4GHz

Radio

SPI

UART/USB

PIO

PCM

XTAL EXTERNAL

FLASH

RF IN

RF OUT

Laptop and desktop PCs

Applications

Mobile Phones

Cordless Headsets

Personal Digital Assistants (PDAs)

Computer Accessories (Compact Flash,

PCMCIA and SD cards)

Domestic and industrial appliances

The design is optimised to require very few external

RF components to facilitate rapid design of the applica-

tion printed wiring board, and therefore the fastest pos-

sible time to market and lowest overall cost.

A low intermediate frequency receiver is utilised to

allow on-chip channel filtering. All hardware is fully

compliant with the Bluetooth specification.

The device operates from a regulated supply in the

range 2.7V to 3.3V and is available in an 81-ball BGA

package.

Device Features

Compliant to Bluetooth specification V1.1

Small footprint in 8mm x 8mm 81-ball BGA

Fully integrated RF block with no external

adjustments or trim

USB V1.1 compliant

Qualified Bluetooth firmware included

Extensive built-in-self-test to minimise end

product final test time

RF reference designs available

Low power consumption/optimisation

Support for up to 7 slaves

BlueCore 01b Product Data Sheet

bc01b-ds-003d

Product Data Sheet

Production Information

Radio

Qualified Bluetooth component

Extensive built-in-self-test to minimise end

product final test time

No external trimming required in production

Full RF reference designs available

Transmitter

Up to 2dBm output power for Class 2

operation

Support for external PA for Class 1 operation

with level control and RSSI >30dB dynamic

range

Receiver

High out-of-band blocking immunity,

sufficient for embedding into mobile phones

Integrated channel filters

Synthesiser

Fully integrated; no external VCO varactor

diode or resonator

Closed loop during TX burst resulting in no

carrier drift

Baseband

All packet types supported. Piconet and

Scatternet support

Multiple physical application interfaces:

UART:

PCM:

USB:

Firmware

Link Controller, Link manager and HCI

Extensive power saving modes, including

PARK, HOLD and SNIFF

Ancillary Features

Internal low-dropout regulator with low stand-

by current (uses one external transistor)

Crystal oscillator with digital trimming allows

use of low cost reference crystal

Trancoders for A-law, µ-law and CVSD for

HCI voice traffic

Data and voice to 1.5Mbs-1

Programmable, for voice: 13-bit

8kss-1 synchronous bi-directional

serial audio interface

Data and voice. V1.1 Compliant.

Supports OHCI and UHCI

Digital demodulator for superior co-channel

rejection

Power-On-Reset

Optional build includes embedded L2CAP,

RFCOMM and Service Discovery

Key Features

Page 2 of 15

Key Features

Support for up to seven slaves

BlueCore 01b Product Data Sheet

bc01b-ds-003d

Product Data Sheet

Production Information Page 3 of 15

Microcontroller

Interrupt

controller

Event

timer

RISC

microcontroller

Parallel

I/O

PIO[2]USB_PULL_UP

PIO[3]USB_WAKE_UP

PIO[4]USB_ON

PIO[5]/USB_DETACH

PIO[6]

PIO[7]

VSS_MEM

VSS_PADS

VSS_CORE

Baseband DSP

SPI_CSB

SPI_CLK

SPI_MOSI

SPI_MISO

PCM_OUT

PCM_IN

PCM_SYNC

PCM_CLK

UART_TX

UART_RX

UART_RTS/USB_D+

UART_CTS/USB_D

Audio

PCM

interface

UART/USB

Synchronous

serial

interface

Memory

management

unit

Burst

mode

controller

RAM

Memory

mapped

control/status

registers

Physical

layer

DSP

hardware

engine

RESET

TEST_A

TEST_B

SCAN_EN

VDD_MEM

VDD_PADS

VDD_CORE

VREG

XTAL_OUT

XTAL_IN

VDD_VCO

Clock

generator

V regulator

VDD_RADIO

RSSI

PIO[0]/RXEN

RF_IN

TX_A

TX_B

PIO[1]TXEN

level

control

PA DAC

IQ DEMOD

synthesiser

/N/N+1

Tune

LOOP_FILTER

ADC

Demodulator

VSS_VCO

VSS_RADIO

+45

-45

RF Receiver

RF Transmitter

IQ MOD

TX_PWR

RF Synthesiser

Fref

External

memory

driver

CSB

A[17:0]

D[15:0]

WEB

REB

LNA

Figure 2: BlueCore01b Device Diagram

Device Diagram

BlueCore 01b Product Data Sheet

bc01b-ds-003d

Product Data Sheet

Production Information

Page 4 of 15

VSS_PADS VDD_PADS UART_TX UART_RTS /

USB_D+ VDD_MEM VSS_MEM WEB A[0] A[1]

PIO[3] /

USB_

WAKE_UP

PIO[4] /

USB_ON UART_RX UART_CTS /

USB_D- PCM_SYNC A[6] A[3] A[4] A[2]

RESET

PIO[2] /

USB_PULL_

SPI_MISO SPI_MOSI PCM_IN D[15] A[9] A[7] A[5]

TX_PWR PIO[0] /

RXEN SPI_CLK SPI_CSB PCM_CLK A[12] A[11] A[10] A[8]

RF_IN VSS_RADIO PCM_OUT SCAN_EN NC D[13] A[15] A[13] A[14]

TX_B VSS_RADIO PIO[1] /

TXEN

PIO[5] /

USB_

DETACH

D[11] D[12] D[10] A[17] CSB

TX_A VDD_RADIO PIO[6] PIO[7] D[14] D[7] D[9] A[16] REB

VSS_VCO LOOP_

FILTER TEST_B VDD_CORE VSS_CORE D[6] D[4] D[3] D[0]

VDD_VCO TEST_A XTAL_OUT XTAL_IN VREG D[8] D[5] D[2] D[1]

123456789

Figure 3: BlueCore01b Device Pinout

Device Pinout Diagram

Note: NC = Do not connect

Device Pinout Diagram

Orientation from top of device

BlueCore 01b Product Data Sheet

bc01b-ds-003d

Product Data Sheet

Production Information Page 5 of 15

Terminal Name Pad Type DescriptionBall

RF_IN - Receiver RF inputE1

Transmitter RF outputG1

Radio

TX_B - Transmitter RF output (complement of TX_A)F1

PIO[1] / TXEN Bidirectional

pulled down Control output for external switch or PA (if fitted)F3

PIO[0] / RXEN Bidirectional

pulled down

Control output for external switch or LNA

(if fitted)

TX_PWR Current DAC output to set external PA levelD1

XTAL_IN Sense for crystal or external clock inputJ4

XTAL_OUT Drive for crystalJ3

Synthesiser and Oscillator

A[17:0] Address bus for external memory

(1)

WEB Write Enable for external memory (active low)A7

Data bus for external memory

External Memory Port

REB Read Enable for external memory (active low)G9

CSB Chip Select for external memory (active low)F9

PCM_SYNC Synchronous data strobeB5

PCM_IN Synchronous 8kss-1 data input

Synchronous data clockD5

PCM Interface

PCM_OUT Synchronous 8kss-1 data outputE3

LOOP_FILTER Synthesiser external loop filterH2

CMOS output

D[15:0] Bidirectional

CMOS output

(1)

Bidirectional

pulled down

CMOS input

pulled down

CMOS output

TX_A -

Current DAC

PCM_CLK Bidirectional

pulled down

Note:

(1) See Address and Data Bus tables at the end of this section.

Device Terminal Functions

BlueCore 01b Product Data Sheet

bc01b-ds-003d

Product Data Sheet

Production Information

Page 6 of 15

SPI ClockD3

Test and Debug

SPI_MOSI CMOS input, 5V tolerant

pulled down SPI Data InputC4

UART_TX UART data outputA3

UART_RX UART data inputB3

UART or USB(1)

UART_RTS / USB_D+ CMOS output UART Ready To Send / USB D+A4

PIO[2] / USB_PULL_UP Bidirectional

pulled down USB Pull-Up (via 1.5kΩ resistor to D+)

UART_CTS / USB_D- CMOS input UART Clear To Send / USB D-B4

CMOS output

PIO[3] / USB_WAKE_UP Bidirectional

pulled down

Output goes high to wake up PC when in USB

mode

Terminal Name Pad Type DescriptionBall

CMOS input, 5V tolerant

pulled down

PIO[4] / USB_ON Bidirectional

pulled down

USB On (input senses when VBUS is high,

wakes BlueCore01b)

PIO[5] / USB_DETACH Bidirectional

pulled down Chip detaches from USB when this line is highF4

Device Terminal Functions (continued)

SPI_CLK CMOS input, 5V tolerant

pulled down

SPI_CSB SPI Chip SelectD4

CMOS input, 5V tolerant

pulled up

TEST_A -Analog test port AJ2

SPI_MISO CMOS output Tristate SPI Data OutputC3

PIO[0] /RXEN Bidirectional

pulled down

PIO[2] /USB_PULL_UP Bidirectional

pulled down Input/Output port or USBC2

PIO[1] /TXEN Bidirectional

pulled down Input/Output port or high when TX is enabledF3

PIO Port

PIO[3] /USB_WAKE_UP Bidirectional

pulled down

RESET CMOS input with weak

internal pull-down ResetC1

Input/Output port or high when RX is enabledD2

Input/Output port or USBB1

TEST_B -Analog test port BH3

SCAN_EN CMOS input with weak

internal pull-down For test purposes only (leave unconnected)E4

PIO[4] /USB_ON Input/Output port or USBB2

PIO[5] /USB_DETACH Input/Output port or USB

PIO[7] Bidirectional

pulled down Input/Output portG4

Bidirectional

pulled down

Bidirectional

pulled down F4

PIO[6] Bidirectional

pulled down Input/Output portG3

Note:

(1) BC01b-USB supports both USB and UART (but not simultaneous operation). BC01b-URT supports UART only.

BlueCore 01b Product Data Sheet

bc01b-ds-003d

Product Data Sheet

Production Information

Terminal Ball

A[1]

A[0]

Address Lines

Terminal Ball

D[1] J9

D[0] H9

Data Bus

A[4]

A[5]

A[6]

A[8]

A[9]

D[2] J8

D[3] H8

D[4] H7

D[5] J7

D[6] H6

A[10] D8

A[11] D7

A[12] D6

A[13] E8

A[14] E9

A[15] E7

A[16] G8

A[17] F8

D[7] G6

D[8] J6

D[9] G7

D[10] F7

D[11] F5

D[12] F6

D[13] E6

D[14] G5

D[15] C6

VREG LDO voltage regulator output to external pass

transistor

Power Supplies and Control

VDD_CORE VDD For internal digital circuitryH4

Terminal Name Pad Type DescriptionBall

VDD_RADIO For RF circuitryG2VDD

VDD_VCO For VCO and synthesiser

VDD_PADS For all Input/Output except memory portA2VDD

VDD_MEM For external memory portA5VDD

VSS_CORE For internal digital circuitryH5VSS

VSS_RADIO For RF circuitryF2, E2VSS

VSS_VCO For VCO and synthesiserH1VSS

VSS_PADS For Input/Output except memory portA1VSS

VSS_MEM For external memory portA6VSS

Page 7 of 15

Device Terminal Functions (continued)

J1VDD

A[2] B9

A[3] B7

A[7] C8

BlueCore 01b Product Data Sheet

bc01b-ds-003d

Product Data Sheet

Production Information

Page 8 of 15

Absolute Maximum Ratings

Storage Temperature -30°C 85°C

Supply Voltage, VDD -0.4V 3.6V

Rating

Other Terminal Voltages (except 5V tolerant) VSS-0.4V VDD+0.4V

5V Tolerant Terminals -0.4V 5.5V

Temperature -20°C(1) 70°C(1)

Supply Voltage, all VDD terminals 2.7V 3.3V(2)

Operating Condition

Supply Voltage, VDD_PADS for USB operation 3.0V 3.4V

0.3V

Recommended Operating Conditions

Notes:

(1)The device is fully functional across this range.

(1) The guaranteed radio performance is shown in the Radio Characteristics section.

(2)The recommended supply voltage is 3.3V (to be compatible with industry standard regulators) but

(2) the device will function up to 3.4V.

Input/Output Terminal Characteristics

VDD = 3.0V (except as specified)

0.3V x VDD

VDD+0.4

-0.4

0.7VDD

Input voltage

VIL input logic level low

VIH input logic level high

-125

125/12.5(1)

0.2

VDD-0.2

-1

2.5

Output voltage

VOL output logic level low

(IO= 4.0mA)

VOH output logic level high

(IO= -4.0mA)

Tristate leakage current

CIInput capacitance

Note:

(1) PIO terminals have weak pull-down resistors (1/10th current of standard pull-down resistors).

Min Max

µA

Difference between any two VDD terminals -

-1

-20

20/2(1)

Input current

CMOS input only

(VI= 0V or VI=3.3V, VDD = 3.3V)

CMOS input + pull-up

(VI= 0V, VDD =3.3V)

CMOS input + pull-down

(VI=3.3V, VDD =3.3V)

Electrical Characteristics

Digital Terminals Min UnitMaxTyp

BlueCore 01b Product Data Sheet

bc01b-ds-003d

Product Data Sheet

Production Information

Output regulation voltage (1)

Maximum allowable voltage on Vreg pad

Bias current

Maximum regulation current

Voltage Regulator (VREG) Min UnitMaxTyp

Power-on Reset

Input/Output Terminal Characteristics (continued)

2.40

2.60

200

2.50

2.70

220

Min UnitMaxTyp

2.30

2.50

180

0.7VDD_PADS

VDD falling threshold

VDD rising threshold

Hysteresis

Input threshold

VIL input logic level low

VIH input logic level high

USB Terminals Min Typ

2.74

3.1

2.79

3.15

2.84

3.2

100

µA

Electrical Characteristics (continued)

UnitMax

0.3VDD_PADS

µA

-1Input leakage current - 1

pF2.5CI Input capacitance - 10

2.8

Output levels to correctly terminated USB cable

VOL input logic level low

VOH input logic level high

0.2

VDD_PADS

Unit

SCO connection HV3 (1s interval sniff mode) (Slave) mA

SCO connection HV1 (Slave) mA

PeakMode Avg

Power Consumption(1)

VDD = 3.0V Temperature = 20°C

ACL data transfer 115.2kbps UART (Master)

-29

mAACL data transfer 720kbps USB (Master) -82

mAPeak current during RF burst 135-

SCO connection HV3 (1s interval sniff mode) (Master) mA-42

SCO connection HV1 (Master) mA77 -

mAACL data transfer 720kbps USB (Slave) -81

mAACL connection, Sniff Mode 40ms interval, 38.4kbps UART -5.5

mAACL connection, Sniff Mode 1.28s interval, 38.4kbps UART -1.1

mAParked Slave, 1.28s beacon interval, 38.4kbps UART -1.1

µA

Deep Sleep Mode 90

Page 9 of 15

Note:

(1) Power consumption is for BC01b-USB module including external flash ROM.

Note:

(1)The regulated voltage is selected by a variable stored in the flash ROM.

BlueCore 01b Product Data Sheet

bc01b-ds-003d

Product Data Sheet

Production Information

Unit

Sensitivity at 0.1% BER (1) dBm

Maximum received signal (1) dBm

Bluetooth

Specification

Receiver

Radio Characteristics at 20°C

VDD = 3.0V f=2.45GHz

-5

C/I co-channel (1)

-70

-20

119

dBAdjacent channel selectivity C/I 1MHz (1) 0-2

dB2nd adjacent channel selectivity C/I 2MHz (1) -30-34

dB3rd adjacent channel selectivity C/I >3MHz (1) (2) -40-45

-79

Max

-75

dBm1dB compression point at 1.9GHz --12 --

Bluetooth

Specification

Transmitter Typ Max

Min

RF transmit power (1) -6 to +42 6-2

RF power range control resolution -2

20dB bandwidth for modulated carrier 1000885

3rd adjacent channel transmit power (1) -40

Page 10 of 15

Unit

dBm

kHz

dBc

TypMin

Electrical Characteristics (continued)

dBImage rejection C/I (1) (3) -9

-14

dBmMaximum level of intermodulation interferers (1) (4) -39-30

RF power control range (1) -

2nd adjacent channel transmit power (1) -20-dBc-47 -

--52

Sensitivity at 0.1% BER (1) dBm

Radio Characteristics at 50°C

VDD = 3.0V f=2.45GHz

-70

-74 -70-

Unit

RF transmit power (1) dBm

Bluetooth

Specification

Transmitter Typ

-6 to +4-1

Max

Min

-5

Notes:

(1) Measured according to the Bluetooth specification.

(2) Up to five spurious responses within Bluetooth limits are allowed.

(3) At carrier -3MHz.

(4) Measured at f1-f2=5MHz.

These results were measured on the BlueCore01b chip. Results shown relate to power at the output

of the balun and at the input to the RX matching network. The loss of the RF filter and switch in the

application circuit are not taken into account.

BlueCore01b meets the Bluetooth specification when used in a suitable application circuit between

-20°C and 50°C. When used with an off-chip LNA the sensitivity can be enhanced and the operating

temperature range extended.

Unit

Bluetooth

Specification

Receiver Typ MaxMin

Sensitivity at 0.1% BER (1) with additional off-chip LNA dBm-70-89 --

Sensitivity at 0.1% BER (1) with additional off-chip LNA dBm-70-88 --

BlueCore 01b Product Data Sheet

bc01b-ds-003d

Product Data Sheet

Production Information Page 11 of 15

Top View Bottom View

Package Dimensions

Figure 4: BlueCore01b package dimensions

9876543 21

SEATING

PLANE

SEE DETAIL K

123456 789

DETAIL K

DIM MIN MAX NOTES

0.35

DIMENSION b IS MEASURED AT THE MAXIMUM

SOLDER BALL DIAMETER PARALLEL TO DATUM

PLANE Z.

DATUM Z IS DEFINED BY THE SPHERICAL

CROWNS OF THE SOLDER BALLS.

PARALLELISM MEASUREMENT SHALL EXCLUDE

ANY EFFECT OF MARK ON TOP SURFACE OF

PACKAGE.

0.8 1

0.25 0.35

0.22 REF

0.45 REF

0.45

8 BSC

0.8 BSC

6.4 BSC

BC01bv-USB/URT VFBGA 81 BALLS

8X8X1 PKG PITCH POD

(JEDEC MO-225-A)

PIN A1

(A2)

(A3)

0.1 Z

8X e

PIN A1

81X b 1

DIM MIN MAX NOTES

0.35

UNIT

DIMENSION b IS MEASURED AT THE MAXIMUM

SOLDER BALL DIAMETER PARALLEL TO DATUM

PLANE Z.

DATUM Z IS DEFINED BY THE SPHERICAL

CROWNS OF THE SOLDER BALLS.

PARALLELISM MEASUREMENT SHALL EXCLUDE

ANY EFFECT OF MARK ON TOP SURFACE OF

PACKAGE.

1.1 1.50

0.25 0.35

0.36 REF

0.8 REF

0.45

8 BSC

0.8 BSC

6.4 BSC

BC01b-USB/URT BGA 81 BALLS

8X8X1 PKG PITCH POD

(JEDEC MO-225-A)

UNIT

BlueCore 01b Product Data Sheet

bco1b-ds-003d

Product Data Sheet

Production Information

BlueCore 01b Product Data Sheet

Figure 5: Re-flow solder profile 1

100

150

200

250

Time in minutes

Temperature ( C)°

Figure 6: Re-flow solder profile 2

100

150

200

250

Time in minutes

Temperature ( C)°

Figures 5 and 6 show the re-flow solder profile that was used to qualify the BlueCore01b packages.

This temperature profile was repeated three times during the qualification of the BlueCore01b packages with a

maximum temperature of 235°C.

Assembly Guidelines

Page 12 of 15

Whereas the above profile was used to confirm the reliablility of the BlueCore01b packages, the following

(figure 6) is the recommended solder profile to use when assembling BlueCore01b onto a circuit board.

Recommended Solder Profile

Initial Ramp: 60°C to 120°C/minute to 140°C to 150°C equilibrium 90°C to 120°C/minute ramp to 210°C to 220°C

maximum temperature. Time over liquidus should be 45 to 90 seconds. Rapid quenching provides superior

cosmetic appearance and bond strength.

BlueCore 01b Product Data Sheet

bco1b-ds-003d

Product Data Sheet

Production Information

BlueCore 01b Product Data Sheet

Interface Version Shipment Method

USB and UART Tray (dry pack)

UART only Tape and reel

UART only Tray (dry pack)

Order Number

BC01b-USB-TR

BC01b-USB

BC01b-URT-TR

BC01b-URT

Contact CSR Worldwide

To contact a CSR representative, please go to www.csr.com/contacts.htm

CSR Japan

CSR KK

Miyasaka LK Building 3F

43-23, 3 Chome Shimorenjaku

Mitaka-shi, Tokyo

Japan 181-0013

Tel: +81 (0) 422 40 4760

Fax: +81 (0) 422 40 4765

e-mail: sales@csr.com

CSR Head Office

Unit 300, Cambridge Science Park

Milton Road

Cambridge, CB4 0XL

United Kingdom

Tel: +44 (0) 1223 424 167

Fax: +44 (0) 1223 424 178

e-mail: sales@csr.com

CSR USA

1651 N. Collins Blvd.

Suite 210

Richardson

TX75080

USA

Tel: +1 972 238 2300

Fax: +1 972 231 1440

e-mail: sales@csr.com

CSR Denmark

Novi Science Park

Niels Jernes Vej 10

9220 Aalborg East

Denmark

Tel: +45 72 200 380

Fax: +45 96 354 599

e-mail: sales@csr.com

CSR Singapore

Blk 5, Ang Mo Kio

Industrial Park 2A

AMK Tech II, #07-08

Singapore 567760

Tel: +65 484 2212

Fax: +65 484 2219

e-mail: sales@csr.com

USB and UART Tape and reel

Ordering and Contact Information

Page 13 of 15

USB and UART Tray (dry pack)

UART only Tape and reel

UART only Tray (dry pack)

BC01bv-USB-TR

BC01bv-USB

BC01bv-URT-TR

BC01bv-URT

USB and UART Tape and reel

BlueCore 01b Product Data Sheet

bco1b-ds-003d

Product Data Sheet

Production Information

BlueCore 01b Product Data Sheet

bc01b-ds-003d

BlueCore01b Product Data Sheet

July 2001

Advance Information

Information for designers on the target specification for a CSR product now in development.

All detailed specifications including pinouts and electrical specifications may be changed by CSR without

notice.

Pre-Production Information

Final pinout and mechanical dimensions. All electrical specifications can be changed by CSR without notice.

Production Information

Final data sheet including the guaranteed minimum and maximum limits for the electrical specifications.

Production datasheets supersede all previous versions.

Status of Information

Page 14 of 15

Trademarks, Patents and Licenses

BlueCore is a trademark of CSR.

Bluetooth and the Bluetooth logos are trademarks owned by Bluetooth SIG Inc, USA and licensed to CSR.

All other product, service, and company names are trademarks, registered trademarks, or service marks of their respective owners.

The publishing of this information does not imply that any license is granted under any patent or other rights owned by CSR.

CSR reserves the right to make technical changes to its products as part of its development programme.

While every care has been taken to ensure the accuracy of the contents of this document, CSR cannot accept responsibility for any errors.

CSR Ltd 2001

Life Support Policy and Use in Safety-Critical Applications

CSR’s products are not authorised for use in life-support or safety-critical applications.

This is the product overview version of the BlueCore01b data sheet. The long form version is available

separately from CSR.

BlueCore 01b Product Data Sheet

bco1b-ds-003d

Product Data Sheet

Production Information

BlueCore 01b Product Data Sheet

Date: Revision: Reason for Change:

21st Feburary 2001 bc01b-ds-003a Input/Output terminal characteristics information updated

23rd March 2001 bc01b-ds-003b Minor modifications to RF characteristics based upon

latest characterisation data

BlueCore01b Product Data Sheet

bc01b-ds-003d

July 2001

Record of Changes

6th July 2001 bc01b-ds-003c System features added and power consumption figures

expanded

26th July 2001 bc01b-ds-003d Package dimensions added for bc01bv VFBGA packaging

Page 15 of 15

Record of Changes