______________________________________________________________________________________________________________________________ 1 of 2
SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com
RoHS
Specifications All Specifications are typical at nominal input, full load at 25
°
C unless otherwise stated.
AC Input 100-240VAC, -/-10%, 47-63 Hz, 1
∅
MTBF
>
100,000 hours calculated
Input Current
100VAC: 0.9A
Hold
-
up Time
18 ms min. @ 115VAC, 60 msec @ 230VAC
Inrush Current
60A peak, 264Vac, cold start
T
urn
-
on Time
2 seconds, max.
Input Fuse
3.15A Internal Primary Current Fuse is provided
Topology
Switching – Fixed Frequency Flyback
Efficiency
Meets EISA2007, CEC Efficiency Level V,
and EU(EC) No. 278/2009 Phase II requirements
Overload Protection
Hiccup Mode
Output Voltage
See chart
Short Circuit Protection
Hiccup Mode
Output Power
See chart
EMC
See chart below
Ripple and Noise
1% pk-pk max., 20MHz BW
Safety Standards
EN/IEC/CSA/UL60601-1, 3rd Edition
Line & Load Voltage Regulation
Line: +/- 1%, Load: +/-5%
Dielectric Withstand
Input-Output: 5,656VDC, Input-GND: 1,500 Vac,
Output-GND: 500Vdc
Transient Response
500µs max., 50% load step, typical
Operating Temperature 0
°
to 40
°
C, no derating
Minimum Load
Not required
Storage Temperature -30 to +85
°
C
Case Material:
Black 94V0 Polycarbonate
Relativ
e Humidity
5% to 95%, non-condensing
Case Dimensions:
95 x 54 x 31mm. See outline drawing
Weight = 200g
Altitude
0 to 10,000 ft
Output
C
onnector:
2.5mm barrel type (Ault #3) connector,
center contact (+). Other options available
Output C
able
:
5V – 9V models:
#
18AWG (SPT-1), 1,500mm, 2 conductor
12V – 24V models: #18AWG (UL1185), 1,500mm, 2 conductor
EMC Specifications
Conducted Emissio
ns
EN55011 Class B, FCC Part 15, Class B.
Radiated Emissions
EN55011 Class B, FCC Part 15, Class B.
Line Frequency Harmonics
EN61000-3-2, Class A
Voltage Fluctuations/Flicker
EN61000-3-3
Static Discharge Immunity
EN61000-4-2, 6kV Contact Discharge, 8kV air discharge
Radiated RF Immunity
EN61000-4-3, 3V/m.
EFT/Burst Immunity
EN61000-4-4, 2kV/5kHz.
Line Surge Immunity
EN61000-4-5, 1kV differential, 2kV common-mode
Conducted RF Immunity
EN61000-4-6, 3Vrms
Power Frequency Magnetic Field Immunity
EN61000-4-8, 3A/m
Voltage Dip Immunity
EN61000-4-11, Criteria A
MENB1030
Medical Switch-Mode Power Supply 3 Year Warranty
Universal 30 Watt Series
•
100-240VAC Universal Input
•
Meets EISA2007, CEC Efficiency Level V,
EU (EC) No 278/2009 Phase II
•
Certified to UL/EN60601—1,
3
rd
Edition
•
5V to 48V outputs, up to 32W
•
Modified and Custom Designs Available
•
Regulated Output with Low Ripple
•
Impact-Resistant Polycarbonate Enclosure
•
No load Power Consumption <0.3W
•
Desktop & Wall Plug Styles
______________________________________________________________________________________________________________________________ 2 of 2
SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com
Model Number Volts (V) Output Current (max) Max Watts Ripple (Vp-p max)
MENB1030A0503F01 5 V 4.00 A 20.0 W 50 mV
MENB1030A0703F01 7.5 V 3.00 A 22.5 W 75 mV
MENB1030A0903F01 9 V 3.00 A 27.0 W 90 mV
MENB1030A1203F01 12 V 2.50 A 30.0 W 120 mV
MENB1030A1403F01 14 V 2.10 A 29.4 W 140 mV
MENB1030A1503F01 15 V 2.00 A 30.0 W 150 mV
MENB1030A1803F01 18 V 1.67 A 30.0 W 180 mV
MENB1030A2403F01 24 V 1.33 A 31.9 W 240 mV
MENB1030A4803F01 48 V 0.63 A 30.0 W 480 mV
Notes: Part numbers above include #3 output connector and IEC320 C14 grounded input receptacle. See below for other options.
Model "A" = Original Configuration
Product Family: "M" = Medical, "E" = External, "NB" = Model Series Designator
Output Pow er: "030" = 30 Watts
# of Outputs "1" = Single Output
"01" = Standard. "02" and higher indicates a modified model.Model
Output Voltage: "05" = 5Vdc, "12" = 12Vdc, "24" = 24Vdc, etc.
Input Connector: "F" = IEC320 C14 grounded, Other options available, see below
Output Connector: "03" = 2.5mm Barrel Type Connector. Other options available, contact factory.
Model Number Key
VV
03MENB 011
030
A F
IEC320 - C14 IEC320 - C18 IEC320 - C8 N. America N. America Europe United Australia
Class I Class II Class II Japan Japan Kingdom
Grounded
Ung ro u nd e d
"Shaver"
Int e rc h a nga bl e
Fixed Fixed Fixed Fixed
(F)
(Q)
(N)
(C)
(B)
(M)
(G)
(H)
Notes:
Notes:
1. Ault #3 Connector, center contact (+).
2. Connector is Switchcraft 760 plug or equivalent.
Mating connector is Switchcraft 712A or equivalent.
3. Other connector options are available. Contact your local
SL Pow er Representative for details.
Output Connector
the receptacle chos en. The N. A. blade version (C) w ill be an interchangeable blade.
3. Blade Kit is available w hich w ill include one each of a EU, UK, and Australian blade. Kit part #
2. For Wall-Plug options, choose the applicable letter above and the unit w ill be fitted w ith
is KT1027K. Thes e can be used w ith the (C) version, to allow blades to be changed.
The other options (B), (M), (G), and (H) w ill be fixed blade s m olded in the case.
AC Input Receptacle Options
Desktop
1. For desktop options, choose applicable letter above.
Wall-Plug
Desktop Style Wall-plug Style (“B” Option Shown)
Data Sheet © 2011 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 9-12-2011
However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
Outline Drawings
DATE
CODE
DATE
CODE
Medical Switch-Mode Power Supply 3 Year Warranty
MENB1030
Universal 30 Watt Series
