https://www.phoenixcontact.com/us/products/3074088 Installation terminal block-UTI 35-3074088 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Installation terminal block, Screw connection, cross section:0.75 mm-35 mm, AWG:18-2, width:15.2 mm, color:gray, mounting type: NS 35/7,5, NS 35/15 Your advantages The installation terminal block features a particularly low-profile design and is suitable for wiring in flat installation distributors The asymmetrical arrangement of the terminal blocks on the DIN rail enables the neutral busbar to be routed past the terminal blocks Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356347266 Weight per Piece (excluding packing) 45.600 g Custom tariff number 85369010 Country of origin China Technical data General Number of levels 1 Number of connections 2 Potentials 1 Nominal cross section 35 mm Color gray Insulating material PA Flammability rating according to UL 94 V2 01/18/2021Page1/19 https://www.phoenixcontact.com/us/products/3074088 Installation terminal block-UTI 35-3074088 Technical data General Maximum load current 125 A (with 35 mm conductor cross section) Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 4.06 W Maximum load current 125 A (with 35 mm conductor cross section) Nominal current IN 125 A Nominal voltage UN 800 V Open side panel No Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 3.5 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.75 mm / 0.4 kg 35 mm / 6.8 kg Tensile test result Test passed Result of tight fit on support Test passed Tight fit on carrier NS 32/NS 35 Setpoint 10 N Result of voltage-drop test Test passed Result of temperature-rise test Test passed Requirement temperature-rise test Increase in temperature 45 K Short circuit stability result Test passed Conductor cross section short circuit testing 35 mm Short-time current 4.2 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Relative insulation material temperature index (Elec., UL 746 B) 125 C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 115 C 01/18/2021Page2/19 https://www.phoenixcontact.com/us/products/3074088 Installation terminal block-UTI 35-3074088 Technical data Dimensions Width 15.2 mm Length 55 mm Height NS 35/7,5 51 mm Height NS 32 56 mm Connection data Note Terminal point Connection method Screw connection Screw thread M6 Stripping length 16 mm Tightening torque, min 3.2 Nm Tightening torque max 3.7 Nm Connection in acc. with standard IEC60947-7-1 Conductor cross section solid min. 0.75 mm Conductor cross section solid max. 35 mm Conductor cross section AWG min. 18 Conductor cross section AWG max. 2 Conductor cross section flexible min. 0.75 mm Conductor cross section flexible max. 35 mm Min. AWG conductor cross section, flexible 18 Max. AWG conductor cross section, flexible 2 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.75 mm Conductor cross section flexible, with ferrule without plastic sleeve max. 35 mm Conductor cross section flexible, with ferrule with plastic sleeve min. 0.75 mm Conductor cross section flexible, with ferrule with plastic sleeve max. 35 mm Cross section with insertion bridge, solid max. 35 mm Cross section with insertion bridge, stranded max. 35 mm 2 conductors with same cross section, solid min. 0.75 mm 2 conductors with same cross section, solid max. 10 mm 2 conductors with same cross section, stranded min. 0.75 mm 2 conductors with same cross section, stranded max. 10 mm Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.75 mm Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 6 mm Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 0.75 mm Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 10 mm 01/18/2021Page3/19 https://www.phoenixcontact.com/us/products/3074088 Installation terminal block-UTI 35-3074088 Technical data Standards and Regulations Connection in acc. with standard IEC60947-7-1 Flammability rating according to UL 94 V2 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Circuit diagram 1 = cover 2 = fixed bridge 3 = insertion bridge 4 = switch bar for 2 terminal blocks 5 = separating plate 6 = partition plate 7 = test plug socket, for test connection with test plug PS 8 = test plug socket, insulated, can only be used with FBI Classifications eCl@ss eCl@ss 10.0.1 27141125 eCl@ss 11.0 27141125 eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141125 eCl@ss 8.0 27141125 eCl@ss 9.0 27141125 ETIM ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC001329 ETIM 6.0 EC001329 01/18/2021Page4/19 https://www.phoenixcontact.com/us/products/3074088 Installation terminal block-UTI 35-3074088 Classifications ETIM ETIM 7.0 EC001329 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 UNSPSC 18.0 39121410 UNSPSC 19.0 39121410 UNSPSC 20.0 39121410 UNSPSC 21.0 39121410 Approvals Approvals Approvals EAC / EAC Ex Approvals Approval details EAC EAC RU CDE.A*30.B.01742 RU CDE.BL08.B.00534 Accessories Accessories Cover profile 01/18/2021Page5/19 https://www.phoenixcontact.com/us/products/3074088 Installation terminal block-UTI 35-3074088 Accessories Cover-EA 11-1024263 Single cover, for covering one terminal block, snap fit, cannot be labeled, color: transparent Cover profile-AP-NLS N-1013634 Cover profile, length: 300 mm, color: transparent DIN rail DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 UNPERF 2000MM-0801681 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail perforated-NS 35/ 7,5 WH PERF 2000MM-1204119 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver 01/18/2021Page6/19 https://www.phoenixcontact.com/us/products/3074088 Installation terminal block-UTI 35-3074088 Accessories DIN rail, unperforated-NS 35/ 7,5 WH UNPERF 2000MM-1204122 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 AL UNPERF 2000MM-0801704 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Aluminum, uncoated, length:2000 mm, color:silver DIN rail perforated-NS 35/ 7,5 ZN PERF 2000MM-1206421 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 ZN UNPERF 2000MM-1206434 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 CU UNPERF 2000MM-0801762 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Copper, uncoated, length:2000 mm, color:copper-colored 01/18/2021Page7/19 https://www.phoenixcontact.com/us/products/3074088 Installation terminal block-UTI 35-3074088 Accessories End cap-NS 35/ 7,5 CAP-1206560 DIN rail end piece, for DIN rail NS 35/7.5 DIN rail perforated-NS 35/15 PERF 2000MM-1201730 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 UNPERF 2000MM-1201714 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail perforated-NS 35/15 WH PERF 2000MM-0806602 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 WH UNPERF 2000MM-1204135 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver 01/18/2021Page8/19 https://www.phoenixcontact.com/us/products/3074088 Installation terminal block-UTI 35-3074088 Accessories DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Aluminum, uncoated, length:2000 mm, color:silver DIN rail perforated-NS 35/15 ZN PERF 2000MM-1206599 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 ZN UNPERF 2000MM-1206586 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 CU UNPERF 2000MM-1201895 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Copper, uncoated, length:2000 mm, color:copper-colored End cap-NS 35/15 CAP-1206573 DIN rail end piece, for DIN rail NS 35/15 01/18/2021Page9/19 https://www.phoenixcontact.com/us/products/3074088 Installation terminal block-UTI 35-3074088 Accessories DIN rail, unperforated-NS 35/15-2,3 UNPERF 2000MM-1201798 DIN rail, unperforated, Standard profile 2.3mm, width:35 mm, height:15 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver End block End clamp-CLIPFIX 35-3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray End clamp-CLIPFIX 35-5-3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray End clamp-E/NS 35 N-0800886 End clamp, width: 9.5 mm, color: gray End clamp-E/UK-1201442 End clamp, width:9.5 mm, height:35.3 mm, material:PA, length:50.5 mm, Mounting on a DIN rail NS 32 or NS 35, color:gray 01/18/2021Page10/19 https://www.phoenixcontact.com/us/products/3074088 Installation terminal block-UTI 35-3074088 Accessories End clamp-E/UK 1-1201413 End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray Insertion bridge Insertion bridge-EB 10-15-0205135 Insertion bridge, pitch: 15.25 mm, number of positions: 10, color: gray Insertion bridge-EB 2-15 K/UK 35-0205119 Insertion bridge, pitch: 15 mm, number of positions: 2, color: gray Insertion bridge-EB 3-15 K/UK 35-0205106 Insertion bridge, pitch: 15 mm, number of positions: 3, color: gray Insertion bridge-EB 10-15 K/UK 35-0205096 Insertion bridge, pitch: 15 mm, number of positions: 10, color: gray 01/18/2021Page11/19 https://www.phoenixcontact.com/us/products/3074088 Installation terminal block-UTI 35-3074088 Accessories Insulating sleeve Insulating sleeve-PS-IH WH-0311566 Insulating sleeve, color: white Insulating sleeve-PS-IH RD-0311579 Insulating sleeve, color: red Insulating sleeve-PS-IH BU-0311582 Insulating sleeve, color: blue Insulating sleeve-PS-IH YE-0311595 Insulating sleeve, color: yellow Insulating sleeve-PS-IH GN-0311605 Insulating sleeve, color: green 01/18/2021Page12/19 https://www.phoenixcontact.com/us/products/3074088 Installation terminal block-UTI 35-3074088 Accessories Insulating sleeve-PS-IH GY-0311621 Insulating sleeve, color: gray Insulating sleeve-PS-IH BK-0311634 Insulating sleeve, color: black Insulating sleeve-PS-IH VT-0311618 Insulating sleeve, color: violet Labeled terminal marker Zack marker strip-ZB 15 CUS-0824945 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm, Number of individual labels: 5 Zack marker strip-ZB 15,LGS:L1-N,PE-0811998 Zack marker strip, Strip, white, labeled, printed horizontally: L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm, Number of individual labels: 5 01/18/2021Page13/19 https://www.phoenixcontact.com/us/products/3074088 Installation terminal block-UTI 35-3074088 Accessories Zack marker strip-ZB 10 CUS-0824941 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip-ZB10,LGS:FORTL.ZAHLEN-1053014 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip-ZB10,QR:FORTL.ZAHLEN-1053027 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks-ZB10,LGS:L1-N,PE-1053412 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks-ZB10,LGS:U-N-1053438 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: U, V, W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 01/18/2021Page14/19 https://www.phoenixcontact.com/us/products/3074088 Installation terminal block-UTI 35-3074088 Accessories Marker for terminal blocks-UC-TM 10 CUS-0824605 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual labels: 48 Marker for terminal blocks-UCT-TM 10 CUS-0829623 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm, Number of individual labels: 36 Neutral conductor rail Neutral busbar-NLS-CU 3/10 SN 1000MM-0402174 Neutral busbar, width:10 mm, height:3 mm, DIN VDE 0611-4: 1991-02, material:Copper, tin-plated, length:1000 mm, color:silver Partition plate Separating plate-TS-K-1302215 Separating plate, length: 22 mm, width: 0.5 mm, height: 22 mm, color: gray Screw bridge 01/18/2021Page15/19 https://www.phoenixcontact.com/us/products/3074088 Installation terminal block-UTI 35-3074088 Accessories Fixed bridge-FBI 2-15-0201333 Fixed bridge, pitch: 15 mm, number of positions: 2, color: silver Fixed bridge-FBI 3-15-0201278 Fixed bridge, pitch: 15 mm, number of positions: 3, color: silver Fixed bridge-FBI 5-15-0711302 Fixed bridge, pitch: 15 mm, number of positions: 5, color: silver Screwdriver tools Screwdriver-SZS 1,0X6,5 VDE-1205079 Screwdriver, slot-headed, VDE insulated, size: 1.0 x 6.5 x 150 mm, 2-component grip, with non-slip grip Support Support bracket-AB-UTN 2,5/10-3245082 Support bracket, Bracket for busbars, set every 20 cm, length: 58.4 mm, width: 2.2 mm, height: 46.9 mm, number of positions: 1, color: blue 01/18/2021Page16/19 https://www.phoenixcontact.com/us/products/3074088 Installation terminal block-UTI 35-3074088 Accessories Switching jumper Switching jumper-SBH 2-15-0205232 Switching jumper, pitch: 15 mm, number of positions: 2, color: silver Terminal marking Marker card-SBS10:UNBEDRUCKT-1007248 Marker card, Card, white, unlabeled, can be labeled with: Marker pen, perforated, mounting type: snap into tall marker groove, snap into flat marker groove, for terminal block width: 10 mm, lettering field size: 6 x 10.1 mm, Number of individual labels: 250 Zack marker strip-ZB 15:UNBEDRUCKT-0811972 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm, Number of individual labels: 5 Zack marker strip-ZB 10:UNBEDRUCKT-1053001 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm, Number of individual labels: 10 01/18/2021Page17/19 https://www.phoenixcontact.com/us/products/3074088 Installation terminal block-UTI 35-3074088 Accessories Marker for terminal blocks-UC-TM 10-0818069 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual labels: 48 Marker for terminal blocks-UCT-TM 10-0829142 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER, BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm, Number of individual labels: 36 Test plug terminal block Test plugs-PS-MT-0311647 Test plugs, color: silver Test socket Female test connector-PSB 6/5/6-0205290 Female test connector, color: silver Warning label printed 01/18/2021Page18/19 https://www.phoenixcontact.com/us/products/3074088 Installation terminal block-UTI 35-3074088 Accessories Warning label-WS 5-15-1004445 Warning label, Plate, orange, labeled: Lightning flash and warning in English, mounting type: screw, rivet, for terminal block width: 15 mm, diameter: 0 mm Warning label-WS 4-15-1004241 Warning label, Plate, orange, labeled: Lightning flash and warning in English, mounting type: screw, rivet, for terminal block width: 15 mm, diameter: 0 mm Phoenix Contact 2021 (c) - all rights reserved http://www.phoenixcontact.com 01/18/2021Page19/19