https://www.phoenixcontact.com/us/products/3074088
01/18/2021Page1/19
Installation terminal block-UTI 35-3074088
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Installation terminal block, Screw connection, cross section:0.75 mm²-35 mm², AWG:18-2, width:15.2 mm,
color:gray, mounting type: NS 35/7,5, NS 35/15
Your advantages
The installation terminal block features a particularly low-profile design and is suitable for wiring in flat installation distributors
The asymmetrical arrangement of the terminal blocks on the DIN rail enables the neutral busbar to be routed past the terminal blocks
Key Commercial Data
Packing unit 1 pc
GTIN
GTIN 4046356347266
Weight per Piece (excluding packing) 45.600 g
Custom tariff number 85369010
Country of origin China
Technical data
General
Number of levels 1
Number of connections 2
Potentials 1
Nominal cross section 35 mm²
Color gray
Insulating material PA
Flammability rating according to UL 94 V2
https://www.phoenixcontact.com/us/products/3074088
01/18/2021Page2/19
Installation terminal block-UTI 35-3074088
Technical data
General
Maximum load current 125 A (with 35 mm² conductor cross section)
Rated surge voltage 8 kV
Degree of pollution 3
Overvoltage category III
Insulating material group I
Maximum power dissipation for nominal condition 4.06 W
Maximum load current 125 A (with 35 mm² conductor cross section)
Nominal current IN125 A
Nominal voltage UN800 V
Open side panel No
Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection guaranteed
Finger protection guaranteed
Result of surge voltage test Test passed
Result of power-frequency withstand voltage test Test passed
Power frequency withstand voltage setpoint 3.5 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection) Test passed
Result of bending test Test passed
Bending test rotation speed 10 rpm
Bending test turns 135
Bending test conductor cross section/weight 0.75 mm² / 0.4 kg
35 mm² / 6.8 kg
Tensile test result Test passed
Result of tight fit on support Test passed
Tight fit on carrier NS 32/NS 35
Setpoint 10 N
Result of voltage-drop test Test passed
Result of temperature-rise test Test passed
Requirement temperature-rise test Increase in temperature ≤ 45 K
Short circuit stability result Test passed
Conductor cross section short circuit testing 35 mm²
Short-time current 4.2 kA
Result of thermal test Test passed
Proof of thermal characteristics (needle flame) effective duration 30 s
Relative insulation material temperature index (Elec., UL 746 B) 125 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 115 °C
https://www.phoenixcontact.com/us/products/3074088
01/18/2021Page3/19
Installation terminal block-UTI 35-3074088
Technical data
Dimensions
Width 15.2 mm
Length 55 mm
Height NS 35/7,5 51 mm
Height NS 32 56 mm
Connection data
Note Terminal point
Connection method Screw connection
Screw thread M6
Stripping length 16 mm
Tightening torque, min 3.2 Nm
Tightening torque max 3.7 Nm
Connection in acc. with standard IEC60947-7-1
Conductor cross section solid min. 0.75 mm²
Conductor cross section solid max. 35 mm²
Conductor cross section AWG min. 18
Conductor cross section AWG max. 2
Conductor cross section flexible min. 0.75 mm²
Conductor cross section flexible max. 35 mm²
Min. AWG conductor cross section, flexible 18
Max. AWG conductor cross section, flexible 2
Conductor cross section flexible, with ferrule without plastic sleeve min. 0.75 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 35 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 0.75 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 35 mm²
Cross section with insertion bridge, solid max. 35 mm²
Cross section with insertion bridge, stranded max. 35 mm²
2 conductors with same cross section, solid min. 0.75 mm²
2 conductors with same cross section, solid max. 10 mm²
2 conductors with same cross section, stranded min. 0.75 mm²
2 conductors with same cross section, stranded max. 10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules,
with plastic sleeve, minimum 0.75 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules,
with plastic sleeve, maximum 6 mm²
Two conductors with the same cross section stranded, with ferrule and
without plastic sleeve, minimum 0.75 mm²
Two conductors with the same cross section stranded, with ferrule and
without plastic sleeve, maximum 10 mm²
https://www.phoenixcontact.com/us/products/3074088
01/18/2021Page4/19
Installation terminal block-UTI 35-3074088
Technical data
Standards and Regulations
Connection in acc. with standard IEC60947-7-1
Flammability rating according to UL 94 V2
Environmental Product Compliance
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
Circuit diagram
1 = cover
2 = fixed bridge
3 = insertion bridge
4 = switch bar for 2 terminal blocks
5 = separating plate
6 = partition plate
7 = test plug socket, for test connection with test plug PS
8 = test plug socket, insulated, can only be used with FBI
Classifications
eCl@ss
eCl@ss 10.0.1 27141125
eCl@ss 11.0 27141125
eCl@ss 4.0 27141100
eCl@ss 4.1 27141100
eCl@ss 5.0 27141100
eCl@ss 5.1 27141100
eCl@ss 6.0 27141100
eCl@ss 7.0 27141125
eCl@ss 8.0 27141125
eCl@ss 9.0 27141125
ETIM
ETIM 3.0 EC000897
ETIM 4.0 EC000897
ETIM 5.0 EC001329
ETIM 6.0 EC001329
https://www.phoenixcontact.com/us/products/3074088
01/18/2021Page5/19
Installation terminal block-UTI 35-3074088
Classifications
ETIM
ETIM 7.0 EC001329
UNSPSC
UNSPSC 6.01 30211811
UNSPSC 7.0901 39121410
UNSPSC 11 39121410
UNSPSC 12.01 39121410
UNSPSC 13.2 39121410
UNSPSC 18.0 39121410
UNSPSC 19.0 39121410
UNSPSC 20.0 39121410
UNSPSC 21.0 39121410
Approvals
Approvals
Approvals
EAC / EAC
Ex Approvals
Approval details
EAC RU C-
DE.A*30.B.01742
EAC RU C-
DE.BL08.B.00534
Accessories
Accessories
Cover profile
https://www.phoenixcontact.com/us/products/3074088
01/18/2021Page6/19
Installation terminal block-UTI 35-3074088
Accessories
Cover-EA 11-1024263
Single cover, for covering one terminal block, snap fit, cannot be labeled, color: transparent
Cover profile-AP-NLS N-1013634
Cover profile, length: 300 mm, color: transparent
DIN rail
DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 UNPERF 2000MM-0801681
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail perforated-NS 35/ 7,5 WH PERF 2000MM-1204119
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white
passivated, length:2000 mm, color:silver
https://www.phoenixcontact.com/us/products/3074088
01/18/2021Page7/19
Installation terminal block-UTI 35-3074088
Accessories
DIN rail, unperforated-NS 35/ 7,5 WH UNPERF 2000MM-1204122
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized,
white passivated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 AL UNPERF 2000MM-0801704
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Aluminum, uncoated,
length:2000 mm, color:silver
DIN rail perforated-NS 35/ 7,5 ZN PERF 2000MM-1206421
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 ZN UNPERF 2000MM-1206434
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 CU UNPERF 2000MM-0801762
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Copper, uncoated,
length:2000 mm, color:copper-colored
https://www.phoenixcontact.com/us/products/3074088
01/18/2021Page8/19
Installation terminal block-UTI 35-3074088
Accessories
End cap-NS 35/ 7,5 CAP-1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated-NS 35/15 PERF 2000MM-1201730
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 UNPERF 2000MM-1201714
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail perforated-NS 35/15 WH PERF 2000MM-0806602
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized,
white passivated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 WH UNPERF 2000MM-1204135
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized,
white passivated, length:2000 mm, color:silver
https://www.phoenixcontact.com/us/products/3074088
01/18/2021Page9/19
Installation terminal block-UTI 35-3074088
Accessories
DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Aluminum,
uncoated, length:2000 mm, color:silver
DIN rail perforated-NS 35/15 ZN PERF 2000MM-1206599
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 ZN UNPERF 2000MM-1206586
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 CU UNPERF 2000MM-1201895
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Copper, uncoated,
length:2000 mm, color:copper-colored
End cap-NS 35/15 CAP-1206573
DIN rail end piece, for DIN rail NS 35/15
https://www.phoenixcontact.com/us/products/3074088
01/18/2021Page10/19
Installation terminal block-UTI 35-3074088
Accessories
DIN rail, unperforated-NS 35/15-2,3 UNPERF 2000MM-1201798
DIN rail, unperforated, Standard profile 2.3mm, width:35 mm, height:15 mm, acc. to EN 60715, material:Steel,
galvanized, passivated with a thick layer, length:2000 mm, color:silver
End block
End clamp-CLIPFIX 35-3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp-CLIPFIX 35-5-3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp-E/NS 35 N-0800886
End clamp, width: 9.5 mm, color: gray
End clamp-E/UK-1201442
End clamp, width:9.5 mm, height:35.3 mm, material:PA, length:50.5 mm, Mounting on a DIN rail NS 32 or NS 35,
color:gray
https://www.phoenixcontact.com/us/products/3074088
01/18/2021Page11/19
Installation terminal block-UTI 35-3074088
Accessories
End clamp-E/UK 1-1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
Insertion bridge
Insertion bridge-EB 10-15-0205135
Insertion bridge, pitch: 15.25 mm, number of positions: 10, color: gray
Insertion bridge-EB 2-15 K/UK 35-0205119
Insertion bridge, pitch: 15 mm, number of positions: 2, color: gray
Insertion bridge-EB 3-15 K/UK 35-0205106
Insertion bridge, pitch: 15 mm, number of positions: 3, color: gray
Insertion bridge-EB 10-15 K/UK 35-0205096
Insertion bridge, pitch: 15 mm, number of positions: 10, color: gray
https://www.phoenixcontact.com/us/products/3074088
01/18/2021Page12/19
Installation terminal block-UTI 35-3074088
Accessories
Insulating sleeve
Insulating sleeve-PS-IH WH-0311566
Insulating sleeve, color: white
Insulating sleeve-PS-IH RD-0311579
Insulating sleeve, color: red
Insulating sleeve-PS-IH BU-0311582
Insulating sleeve, color: blue
Insulating sleeve-PS-IH YE-0311595
Insulating sleeve, color: yellow
Insulating sleeve-PS-IH GN-0311605
Insulating sleeve, color: green
https://www.phoenixcontact.com/us/products/3074088
01/18/2021Page13/19
Installation terminal block-UTI 35-3074088
Accessories
Insulating sleeve-PS-IH GY-0311621
Insulating sleeve, color: gray
Insulating sleeve-PS-IH BK-0311634
Insulating sleeve, color: black
Insulating sleeve-PS-IH VT-0311618
Insulating sleeve, color: violet
Labeled terminal marker
Zack marker strip-ZB 15 CUS-0824945
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm, Number of individual labels: 5
Zack marker strip-ZB 15,LGS:L1-N,PE-0811998
Zack marker strip, Strip, white, labeled, printed horizontally: L1, L2, L3, N, PE, mounting type: snap into tall marker
groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm, Number of individual labels: 5
https://www.phoenixcontact.com/us/products/3074088
01/18/2021Page14/19
Installation terminal block-UTI 35-3074088
Accessories
Zack marker strip-ZB 10 CUS-0824941
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels:
10
Zack marker strip-ZB10,LGS:FORTL.ZAHLEN-1053014
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 10.2
mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip-ZB10,QR:FORTL.ZAHLEN-1053027
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers
1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm,
lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks-ZB10,LGS:L1-N,PE-1053412
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size:
10.15 x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks-ZB10,LGS:U-N-1053438
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: U, V, W, N, GND,
U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size:
10.15 x 10.5 mm, Number of individual labels: 10
https://www.phoenixcontact.com/us/products/3074088
01/18/2021Page15/19
Installation terminal block-UTI 35-3074088
Accessories
Marker for terminal blocks-UC-TM 10 CUS-0824605
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual
labels: 48
Marker for terminal blocks-UCT-TM 10 CUS-0829623
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm, Number of individual
labels: 36
Neutral conductor rail
Neutral busbar-NLS-CU 3/10 SN 1000MM-0402174
Neutral busbar, width:10 mm, height:3 mm, DIN VDE 0611-4: 1991-02, material:Copper, tin-plated, length:1000 mm,
color:silver
Partition plate
Separating plate-TS-K-1302215
Separating plate, length: 22 mm, width: 0.5 mm, height: 22 mm, color: gray
Screw bridge
https://www.phoenixcontact.com/us/products/3074088
01/18/2021Page16/19
Installation terminal block-UTI 35-3074088
Accessories
Fixed bridge-FBI 2-15-0201333
Fixed bridge, pitch: 15 mm, number of positions: 2, color: silver
Fixed bridge-FBI 3-15-0201278
Fixed bridge, pitch: 15 mm, number of positions: 3, color: silver
Fixed bridge-FBI 5-15-0711302
Fixed bridge, pitch: 15 mm, number of positions: 5, color: silver
Screwdriver tools
Screwdriver-SZS 1,0X6,5 VDE-1205079
Screwdriver, slot-headed, VDE insulated, size: 1.0 x 6.5 x 150 mm, 2-component grip, with non-slip grip
Support
Support bracket-AB-UTN 2,5/10-3245082
Support bracket, Bracket for busbars, set every 20 cm, length: 58.4 mm, width: 2.2 mm, height: 46.9 mm, number of
positions: 1, color: blue
https://www.phoenixcontact.com/us/products/3074088
01/18/2021Page17/19
Installation terminal block-UTI 35-3074088
Accessories
Switching jumper
Switching jumper-SBH 2-15-0205232
Switching jumper, pitch: 15 mm, number of positions: 2, color: silver
Terminal marking
Marker card-SBS10:UNBEDRUCKT-1007248
Marker card, Card, white, unlabeled, can be labeled with: Marker pen, perforated, mounting type: snap into tall marker
groove, snap into flat marker groove, for terminal block width: 10 mm, lettering field size: 6 x 10.1 mm, Number of
individual labels: 250
Zack marker strip-ZB 15:UNBEDRUCKT-0811972
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm, Number of individual
labels: 5
Zack marker strip-ZB 10:UNBEDRUCKT-1053001
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm, Number of individual
labels: 10
https://www.phoenixcontact.com/us/products/3074088
01/18/2021Page18/19
Installation terminal block-UTI 35-3074088
Accessories
Marker for terminal blocks-UC-TM 10-0818069
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual labels: 48
Marker for terminal blocks-UCT-TM 10-0829142
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER,
BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field
size: 8.9 x 9.6 mm, Number of individual labels: 36
Test plug terminal block
Test plugs-PS-MT-0311647
Test plugs, color: silver
Test socket
Female test connector-PSB 6/5/6-0205290
Female test connector, color: silver
Warning label printed
https://www.phoenixcontact.com/us/products/3074088
01/18/2021Page19/19
Installation terminal block-UTI 35-3074088
Accessories
Warning label-WS 5-15-1004445
Warning label, Plate, orange, labeled: Lightning flash and warning in English, mounting type: screw, rivet, for terminal
block width: 15 mm, diameter: 0 mm
Warning label-WS 4-15-1004241
Warning label, Plate, orange, labeled: Lightning flash and warning in English, mounting type: screw, rivet, for terminal
block width: 15 mm, diameter: 0 mm
Phoenix Contact 2021 © - all rights reserved
http://www.phoenixcontact.com