PL IA NT CO M *R oH S Features Applications RoHS compliant* IEC 61000-4-2 ESD (Min. Level 4) Surface Mount SMC package IEC 61000-4-4 EFT Standoff Voltage: 5.0 to 170 volts IEC 61000-4-5 Surge Power Dissipation: 3000 watts SMLJ Transient Voltage Suppressor Diode Series General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 170 V and Breakdown Voltage up to 200 V. Typical fast response times are less than 1.0 ns for unidirectional devices and less than 5.0 ns for bidirectional devices from 0 V to Minimum Breakdown Voltage. Bourns(R) Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. Electrical Characteristics (@ TA = 25 C Unless Otherwise Noted) Parameter Symbol Value Unit Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) PPK 3000 Watts Peak Forward Surge Current 8.3 ms Single Ha Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) IFSM 300 Amps PM(AV) 5.0 Watts VF (Note 5) Volts TJ -55 to +150 C TSTG -55 to +175 C Steady State Power Dissipation @ TL = 75 C Maximum Instantaneous Forward Voltage @ IPP = 100 A (For Unidirectional Units Only) Operating Temperature Range Storage Temperature Range 1. 2. 3. 4. 5. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 C per Pulse Derating Curve. Thermal Resistance Junction to Lead. 8.3 ms Single Ha-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). Single Phase, Ha Wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20 %. VF = 3.5 V on SMLJ5.0A through SMLJ90A and VF= 5.0 V on SMLJ100A through SMLJ170A. How to Order SMLJ 5.0 CA Package SMLJ = SMC/DO-214AB Working Peak Reverse Voltage 5.0 = 5.0 VRWM (Volts) Asia-Pacific: Tel: +886-2 2562-4117 Fax: +886-2 2562-4116 Europe: Tel: +41-41 768 5555 Fax: +41-41 768 5510 The Americas: Tel: +1-951 781-5500 Fax: +1-951 781-5700 www.bourns.com Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SMLJ Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 C Unless Otherwise Noted) Unidirectional Device Part Number SMLJ5.0A SMLJ6.0A SMLJ6.5A SMLJ7.0A SMLJ7.5A SMLJ8.0A SMLJ8.5A SMLJ9.0A SMLJ10A SMLJ11A SMLJ12A SMLJ13A SMLJ14A SMLJ15A SMLJ16A SMLJ17A SMLJ18A SMLJ20A SMLJ22A SMLJ24A SMLJ26A SMLJ28A SMLJ30A SMLJ33A SMLJ36A SMLJ40A SMLJ43A SMLJ45A SMLJ48A SMLJ51A SMLJ54A SMLJ58A SMLJ60A SMLJ64A SMLJ70A SMLJ75A SMLJ78A SMLJ85A SMLJ90A SMLJ100A SMLJ110A SMLJ120A SMLJ130A SMLJ150A SMLJ160A SMLJ170A Part Marking HDE HDG HDK HDM HDP HDR HDT HDV HDX HDZ HEE HEG HEK HEM HEP HER HET HEV HEX HEZ HFE HFG HFK HFM HFP HFR HFT HFV HFX HFZ HGE HGG HGK HGM HGP HGR HGT HGV HGX HGZ HHE HHG HHH HHM HHP HHR Bidirectional Device Part Number SMLJ5.0CA SMLJ6.0CA SMLJ6.5CA SMLJ7.0CA SMLJ7.5CA SMLJ8.0CA SMLJ8.5CA SMLJ9.0CA SMLJ10CA SMLJ11CA SMLJ12CA SMLJ13CA SMLJ14CA SMLJ15CA SMLJ16CA SMLJ17CA SMLJ18CA SMLJ20CA SMLJ22CA SMLJ24CA SMLJ26CA SMLJ28CA SMLJ30CA SMLJ33CA SMLJ36CA SMLJ40CA SMLJ43CA SMLJ45CA SMLJ48CA SMLJ51CA SMLJ54CA SMLJ58CA SMLJ60CA SMLJ64CA SMLJ70CA SMLJ75CA SMLJ78CA SMLJ85CA SMLJ90CA SMLJ100CA SMLJ110CA SMLJ120CA SMLJ130CA SMLJ150CA SMLJ160CA SMLJ170CA Part Marking Min. Max. IDE IDG IDK IDM IDP IDR IDT IDV IDX IDZ IEE IEG IEK IEM IEP IER IET IEV IEX IEZ IFE IFG IFK IFM IFP IFR IFT IFV IFX IFZ IGE IGG IGK IGM IGP IGR IGT IGV IGX IGZ IHE IHG IHH IHM IHP IHR 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.0 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40 44.4 47.8 50 53.3 56.7 60 64.4 66.7 71.1 77.8 83.3 86.7 94.4 100 111 122 133 144 167 178 189 7.00 7.37 7.98 8.60 9.21 9.83 10.4 11.1 12.3 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 26.9 29.5 31.9 34.4 36.8 40.6 44.2 49.1 52.8 55.3 58.9 62.7 66.3 71.2 73.7 78.6 86.0 92.1 95.8 104 111 123 135 147 159 185 197 209 Notes: 1. Suffix `A' denotes a 5 % tolerance unidirectional device. 2. Suffix `CA' denotes a 5 % tolerance bidirectional device. Working Peak Reverse Voltage VRWM @ IT (mA) (Volts) Breakdown Voltage VBR (Volts) 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5 6 6.5 7 7.5 8 8.5 9 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 Maximum Reverse Leakage @ VRWM IR (A) 1000 1000 500 200 100 50 25 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Maximum Reverse Voltage @ IRSM Maximum Reverse Surge Current VRSM (Volts) IRSM (Amps) 9.2 10.3 11.2 12 12.9 13.6 14.4 15.4 17 18.2 19.9 21.5 23.2 24.4 26 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103 113 121 126 137 146 162 177 193 209 243 259 275 326.00 291.30 267.90 250.00 232.60 220.60 208.40 194.80 176.40 164.80 150.60 139.40 129.40 123.00 115.40 106.60 102.80 92.60 84.40 77.20 71.20 66.00 62.00 56.20 51.60 46.40 43.20 41.20 38.80 36.40 34.40 32.00 31.00 29.20 26.60 24.80 22.80 20.80 20.60 18.60 16.80 15.60 14.40 12.40 11.60 11.00 3. For bidirectional devices with a VR of 10 volts or less, the IR limit is double. 4. For unidirectional devices with a VF max. of 3.5 V at an IF of 35 A, 0.5 Sine Wave of 8.3 ms Pulse Width. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SMLJ Transient Voltage Suppressor Diode Series Product Dimensions Recommended Footprint A A B C B C G Dimension A (Max.) F H D B (Min.) E C (Min.) Dimension A B C D E F G H SMC (DO-214AB) 6.60 - 7.11 (0.260 - 0.280) 5.59 - 6.22 (0.220 - 0.245) 2.92 - 3.18 (0.115 - 0.125) 0.15 - 0.31 (0.006 - 0.112) 7.75 - 8.13 (0.305 - 0.320) 0.05 - 0.20 (0.002 - 0.008) 2.01 - 2.62 (0.080 - 0.103) 0.76 - 1.52 (0.030 - 0.060) DIMENSIONS: MM (INCHES) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SMC (DO-214AB) 4.69 (0.185) 3.07 (0.121) 1.52 (0.060) DIMENSIONS: MM (INCHES) Physical Specifications Case ...........................................Molded plastic per UL Class 94V-0 Polarity....................... Cathode band indicates unidirectional device No cathode band indicates bidirectional device Weight .................................................... 0.007 ounces / 0.21 grams SMLJ Transient Voltage Suppressor Diode Series Rating & Characteristic Curves Pulse Derating Curve Maximum Non-Repetitive Surge Current Peak Forward Surge Current (Amps) Peak Pulse Derating in Percent of Peak Power or Current 100 75 50 25 10 x 1000 Waveform as Defined by R.E.A. 300 250 200 150 100 0 0 25 0 75 50 Pulse Width 8.3 ms Single Half Sine-Wave (JEDEC Method) 50 100 125 150 175 1 200 2 5 10 20 50 100 Number of Cycles at 60 Hz Junction Temperature (C) Pulse Waveform Typical Junction Capacitance 10000 TR=10 s Half value= Bidirectional IRSM 2 1000 Capacitance (pF) IP, Peak Pulse Current (%) Unidirectional Peak value (IRSM) 100 Pulse width (TP) is defined as that point where the peak current decays to 50 % of IPSM. 50 10 x 1000 waveform as defined by R.E.A. TA=25 C TP 100 Measured at Zero Bias 0 0 2.0 1.0 3.0 TJ = 25 C 0 4.0 10 0 T, Time (ms) Pulse Rating Curve 10 1.0 8.0 mm Lead Areas 1.0 s 10 s 100 s TP, Pulse Width 1.0 ms 10 ms RM(AV) Steady State Power Dissipation (W) 5.0 TA = 25 C Non-repetitive Pulse Waveform Shown in Pulse Waveform Graph PP, Peak Power (KW) 1000 Steady State Power Derating Curve 100 0.1 0.1 s 100 Standoff Voltage (Volts) 4.0 3.0 2.0 1.0 60 Hz Resistive or Inductive Load 0.0 0 25 50 75 100 125 150 175 200 TL, Lead Temperature (C) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. CDDFN5-0504N TVS/Steering DiodeDiode ArraySeries SMLJ Transient -Voltage Suppressor Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E Index Hole 120 F D2 W B D1 D P A Trailer ....... ....... End C Device ....... ....... ....... ....... Leader ....... ....... W1 Start DIMENSIONS: 10 pitches (min.) MM (INCHES) 10 pitches (min.) Direction of Feed Item Symbol Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel -- REV. 08/12 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Devices are packed in accordance with EIA standard RS-481-A and specifications shown here. SMC (DO-214AB) 7.22 0.10 (0.284 - 0.004) 8.11 0.10 (0.319 0.004) 2.36 0.10 (0.093 0.004) 1.55 0.05 (0.061 0.002) 330 (12.992) 50.0 MIN. (1.969) 13.0 0.20 (0.512 0.008) 1.75 0.10 (0.069 0.004) 7.50 0.05 (0.295 0.002) 4.00 0.10 (0.157 0.004) 4.00 0.10 (0.157 0.004) 2.00 0.05 (0.079 0.002) 0.30 0.10 (0.012 0.004) 16.00 0.20 (0.630 0.008) 22.4 MAX. (0.882) 3,000