MA47600-54 - M/A-COM Technology Solutions, Inc.

Multi Purpose Axial Leaded Glass PIN Diodes

Axial Leaded Glass PIN Diodes

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

Features

♦ Glass Hermetically Sealed Packages

♦ Large Signal Switch Design

♦ Available in Low Capacitance

♦ Passivated Chip for Low Leakage Current

♦ Tape and Reel Packaging Available

♦ Fully RoHS Compliant

♦ MIL-STD 19500 Screening Available

Description

M/A-COM Technology Solutions series of low and

medium power glass PIN diodes are specifically

designed for use in switches, duplexers, electrically

tuned digital filters AGC attenuators, TR switches

and RF modulators. They preform particularly well in

distortion sensitive environments from HF through

S-Band. These hermetically sealed axial leaded PIN

diodes are designed for use in the harshest

commercial and military applications where their

inherent ruggedness makes them an ideal choice.

They may ordered screened to meet MIL-STD 19500

requirements.

Absolute Maximum Ratings

TAMB = +25°C (Unless Otherwise Noted) 1

Parameter Absolute Maximum

D.C. Reverse Voltage (See Tables)

Operating Temperature -55°C to +175°C

Storage Temperature -55°C to +200°C

Installation Temperature +280°C for 10 Seconds

Case Style 54 250mW without heatsink

Case Style 139 500mW without heatsink

Case Style 4 & 146 1000mW without heatsink

Power Dissipation Listed Below Will De-Rate

Linearly to 0mW at 175˚C

Glass Package Styles

Design Recommendations

The axial leaded, glass, PIN diode series is available

in four glass package styles. The ODS 54 is the

most suitable to meet low power, low capacitance

requirements for high isolation in a series connected

switch at VHF frequencies. The ODS 4, 139 and 146

are most suited for moderate power applications

requiring low package inductance.

1. Operation of this device above any one of these

parameters may cause permanent damage.

Notes

ODS 4, 54 , 139, 146

M/A-COM Technology Solutions silicon PIN

diode chips are also available in a wide variety

of alternative package styles besides glass. For

case style options, availability and electrical

specifications, please refer to the “Packaged

PIN Diode Datasheet” located on the M/A-COM

Technology Solutions website at :

www.macomtech.com/DataSheets/packagedpindiodes.pdf

PIN Chip

Glass Cylinder

Tin Plated Dumet Leads

Multi Purpose Axial Leaded Glass PIN Diodes

Axial Leaded Glass PIN Diodes

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

*Specifications subject to change without notice

Part Number

Package

Style

Rev. Volt.5

VR < 10 µA

VDC

Unless

otherwise noted

Max. Cap.

1MHz

CT @ -50V

Unless

otherwise noted

Max. Series Res.

100MHz

RS @ 10mA

Ω

Nominal Characteristics

Carrier

Lifetime4

μS

I Region

Length

Mils

MA47120 54 35 1.00 1 0.5 3.0 0.4

1N5719 54 100 0.35 1.5 2 1.0 2.0

MA4P203 54 100 0.25 3 1.5 0.1 0.8

MA47047 54 200 0.30 3.0 1.0 2.0

MA47600 54 200 0.30 6.0 2.0 4.0

MA4P404 54 250 0.30 .60 2 1.0 1.0

Part Number

Package

Style

Rev. Volt.5

VR < 10 µA

VDC

Max. Cap.

1MHz

CT @ -50V

Max. Series Res.

100MHz

RS @ 10mA

Ω

Nominal Characteristics

Carrier

Lifetime4

μS

I Region

Length

Mils

MA4PH151 139 100 1.20 0.6 1.0 0.8

MA47110 139 200 0.55 6.0 2.0 4.0

MA47123 139 200 0.50 3.0 1.0 2.0

Part Number

Package

Style

Rev. Volt.5

VR < 10 µA

VDC

Max. Cap.

1MHz

CT @ -50V

Max. Series Res.

100MHz

RS @ 50mA

Ω

Nominal Characteristics

Carrier

Lifetime4

μS

I Region

Length

Mils

MA47266 146 200 1.50 0.6 3.0 3.0

MA4PH301 146 200 1.10 1.0 5.0 5.0

Part Number

Package

Style

Rev. Volt.5

VR < 10 µA

VDC

Max. Cap.

1MHz

CT @ -100V

Max. Series Res.

100MHz

RS @ 100mA

Ω

Nominal Characteristics

Carrier I Region

Lifetime4 Length

μS Mils

MA4P504 4 500 0.35 0.60 1.0 2.0

MA4P505 4 500 0.50 0.45 2.0 2.0

MA4P506 4 500 0.85 0.30 3.0 2.0

MA4P606 4 1000 0.70 0.70 4.0 4.0

Notes:

1. Tested at VR = 20V.

2. Tested at IF = 50mA.

3. Tested at VR = 10V.

4. Nominal carrier lifetime, TL, specified at IF = + 10mA , IREV = - 6mA.

5. Minimum specified reverse voltage, VR, is sourced and the resultant reverse leakage current, IR, is measured to be <10μA.

Multi Purpose Axial Leaded Glass PIN Diodes

Axial Leaded Glass PIN Diodes

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

Typical RS vs. IF @ TAMB = +25°C

Multi Purpose Axial Leaded Glass PIN Diodes

Axial Leaded Glass PIN Diodes

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

SERIES RESISTANCE Rs (OHMS)

FORWARD CURRENT (IF)

SERIES RESISTANCE Rs (OHMS)

Typical RS vs. IF @ TAMB = +25°C

Multi Purpose Axial Leaded Glass PIN Diodes

Axial Leaded Glass PIN Diodes

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

Dimension A Dimension B Dimension C Dimension D (Min.)

Mils mm Mils mm Mils mm Mils mm

4 265 ± 35 7.33 ± .89 96 ± 11 2.44 ± .28 20 ± 2 .51 ± .05 1000 25.4

54 155 ± 10 3.94 ± .25 71 ± 3 1.8 ± .08 15 ± 1 .38 ± .03 1000 25.4

139 150 ± 15 3.81 ± .38 60 ± 10 1.52 ± .25 20 ± 3 .51 ± .08 1000 25.4

146 220 ± 20 5.59 ± .51 95 ± 10 2.41 ± .25 30 ± 3 .51 ± .08 1000 25.4

Package

Style

Package Outline Dimensions

A C

(2 plcs)

Assembly Recommendations

• Leads on axial leaded devices must be formed while being held firm. Bending the leads too close to the body

of the part may cause internal damage to the device. Bends <0.060” from body are not recommended.

Appropriate fixturing should be used.

• Devices may be soldered using standard 60/40, Sn/Pb or RoHS compliant solders. Axial leads are tin plated,

50μM, thick to ensure an optimum connection.

• For recommended Sn/Pb and RoHS soldering profiles See Application Note M538 on the M/A-COM

Technology Solutions website.

Multi Purpose Axial Leaded Glass PIN Diodes

Axial Leaded Glass PIN Diodes

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

M/A-COM Technology Solutions axially leaded glass PIN diodes are designed to meet most

environmental and electrical requirements and may be ordered screened to MIL-STD-19500. Examples

of the methods and conditions are described in the table below.

TEST METHOD

MIL-STD 750 DESCRIPTION/ CONDITIONS

Moisture Resistance 1021 85°C, 85% Relative Humidity

High Temperature Storage 1031 +175°C

HTRB 1038 80% of rated VR, 50°C

Temperature Cycling 1051 -65°C to +175°C, 20 Cycles

Shock 2016 500 g’s

Vibration 2056 15 g’s

Solderability 2026 IPC/JDEC J-STD-02

Constant Acceleration 2006 20,000 g’s

Fine Leak 1071 H

Gross Leak 1071 C or E

*Specifications subject to change without notice

Environmental Ratings

Ordering Information

M/A-COM Technology Solutions glass PIN diodes are tape and reeled in 1000 piece quantities. The various base

part numbers are only available in the case styles as shown in the tables on page 2. To order, indicate the base part

number followed by a dash and the indicated package style. Also add a “T” at the end for tape and reel

For example: The MA4P504-4T is the MA4P504 chip in case style 4, tape and reeled.