SN74GTLPH1645
16-BIT LVTTL-TO-GTLP ADJUSTABLE-EDGE-RATE BUS TRANSCEIVER
SCES290D – OCTOBER 1999 – REVISED SEPTEMBER 2001
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
D
Member of the Texas Instruments
Widebus Family
D
TI-OPC Circuitry Limits Ringing on
Unevenly Loaded Backplanes
D
OEC Circuitry Improves Signal Integrity
and Reduces Electromagnetic Interference
D
Bidirectional Interface Between GTLP
Signal Levels and LVTTL Logic Levels
D
LVTTL Interfaces Are 5-V Tolerant
D
High-Drive GTLP Outputs (100 mA)
D
LVTTL Outputs (–24 mA/24 mA)
D
Variable Edge-Rate Control (ERC) Input
Selects GTLP Rise and Fall Times for
Optimal Data-Transfer Rate and Signal
Integrity in Distributed Loads
D
Ioff, Power-Up 3-State, and BIAS VCC
Support Live Insertion
D
Bus Hold on A-Port Data Inputs
D
Distributed VCC and GND Pins Minimize
High-Speed Switching Noise
D
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
description
The SN74GTLPH1645 is a high-drive, 16-bit bus
transceiver that provides LVTTL-to-GTLP and
GTLP-to-LVTTL signal-level translation. It is
partitioned as two 8-bit transceivers. The device
provides a high-speed interface between cards
operating at LVTTL logic levels and a backplane operating at GTLP signal levels. High-speed (about three times
faster than standard LVTTL or TTL) backplane operation is a direct result of GTLP’s reduced output swing
(<1 V), reduced input threshold levels, improved differential input, OECcircuitry, and TI-OPCcircuitry.
Improved GTLP OEC and TI-OPC circuits minimize bus-settling time and have been designed and tested using
several backplane models. The high drive allows incident-wave switching in heavily loaded backplanes with
equivalent load impedance down to 11 Ω.
GTLP is the Texas Instruments derivative of the Gunning Transceiver Logic (GTL) JEDEC standard JESD 8-3.
The ac specification of the SN74GTLPH1645 is given only at the preferred higher noise-margin GTLP, but the
user has the flexibility of using this device at either GTL (VTT = 1.2 V and VREF = 0.8 V) or GTLP (VTT = 1.5 V
and VREF = 1 V) signal levels.
Normally , the B port operates at GTLP signal levels. The A-port and control inputs operate at L VTTL logic levels
but are 5-V tolerant and are compatible with TTL and 5-V CMOS inputs. VREF is the B-port differential input
reference voltage.
Copyright 2001, Texas Instruments Incorporated
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
OEC, TI-OPC, and Widebus are trademarks of Texas Instruments.
DGG OR DGV PACKAGE
(TOP VIEW)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
1DIR
1A1
1A2
GND
1A3
1A4
VCC
GND
1A5
1A6
GND
1A7
1A8
GND
ERC
2A1
2A2
GND
2A3
2A4
GND
VCC
2A5
2A6
GND
2A7
2A8
2DIR
1OE
1B1
1B2
GND
1B3
1B4
VCC
GND
1B5
1B6
GND
1B7
1B8
BIAS VCC
VREF
2B1
2B2
GND
2B3
2B4
GND
VCC
2B5
2B6
GND
2B7
2B8
2OE
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.