CFPT-5300 LEADED TCXO ISSUE 5; 15 december 2009 - RoHS 2002/95/EC Description Ultra high stabilitie 14-pin DIL hermetically sealed TCXO with wide operating temperature range. Manufactured for us by Rakon, its wide frequency range and operating temperature range, coupled with high stability and linear frequency pulling make it the ideal reference oscilator. Its ability to function down to supply voltage of 2.4V and low power consumption makes it suitable for a wide range of applications. Frequency Adjustment Option B: >5ppm* (>7ppm if frequency >20MHz) by means of an external 100kW potentiometer connected as a variable resistor from pin 1 to GND Package Outline Frequency Adjustment Option C: Standard Frequency *Higher adjustment range up to 50ppm and non-standard control voltage ranges are available on request. This may not be compatible with all stability options. Please contact our sales office No frequency adjustment, initial calibration @25C <1.0ppm 14-pin DIL 3.2, 4.096, 5, 6.4, 8.192, 9.6, 10, 12.8, 13, 14.4, 14.85, 16.384, 16.8, 19.2, 19.44, 19.8, 20, 32.768, 38.88, 40MHz Other frequencies in the range 1.25MHz to 40MHz may be available, please contact our sales office Storage Temperature Range Output Compatibility & Load (standard) -55 to 95C Output Compatibility & Load (options) Bump: IEC 60068-2-29, Test Eb, 4000 10 bumps at HCMOS 15pF max ACMOS 50pF max Sinewave, >1.0pk-pk, 10kW // 10pF load Clipped Sinewave, >0.8Vpk-pk, 10kW // 10pF load Sinewave and Clipped Sinewave signals are superimposed on a DC offset, to remove this offset insert an external coupling capacitor in series with the output TCXOs > 7ppm, frequency > 20MHz Linearity <3% (Positive) Input resistance>100kW Modulation Bandwidth>2kHz Supply Voltages 3.3V or 5.0V Environmental 390m/s2 in each of the three mutually perpendicular planes Shock: IEC 60068-2-27 Test Ea, 980m/s 2 acceleration for 6ms duration, 3 shocks in each direction along three mutually perpendicular planes Solderability: IEC 60068-2-20,Test T, method 1 (solder bath): Temperature 235C Vibration: IEC 60068-2-6 Test Fc Procedure B4, 10-60Hz 1.5mm displacement, 60-2000Hz at 98.1m/s2, 30 minutes in each of three mutually perpendicular planes at 1 octave per minute Non-standard supply voltages in the range 2.4V to 6.0V are available on request, please contact our sales office Damp Heat (steady state): IEC 60068-2-3, Test Ca, duration Supply Current Robustness of Termination: IEC 60068-2-21, Test Ua HCMOS 56 days (tensile): Force 1kg Typically: 1+Frequency(MHz)*Supply(V)*{Load(p F)+15}*10-3mA e.g. 20MHz, 5V, 15pF 4mA Sinewave: <8mA Clipped Sinewave Sealing: IEC 60068-2-17, Test Qc (gross) & Test Qk (fine) Immersion in Solvents: IEC 60068-2-45, Test Xa Marking Includes 1+Frequency(MHz)*1.2*{Load(pF)+30}*10-3mA Ageing 1ppm maximum in first year, frequency <20MHz 3ppm maximum for 10 years, frequency <20MHz 2ppm maximum in first year, frequency >20MHz 5ppm maximum for 10 years, frequency >20MHz Frequency Stability Model + Part Number + Frequency + Pin 1 / Static sensitivity identified (Triangle) + Date Code Packaging Bulk Minimum Order Information Required Frequency + Model Number + Frequency Stability vs Operating Temperature Code + Frequency Adjustment Code Temperature: see table Supply Voltage Variation 10% < 0.2ppm* Load co-efficient 15pF 5pF < 0.2ppm* *Dependent on frequency and output type Frequency Adjustment Option A (standard): Control Voltage 1.5V1.0V, applied to pin 1 > 5ppm*, frequency < 20MHz IQD Frequency Products Ltd, Station Road, Crewkerne, Somerset TA18 8AR, United Kingdom Tel: +44 (1460) 270200; Fax: +44 (1460) 72578; Email: info@iqdfrequencyproducts.com Web: www.iqdfrequencyproducts.com Phase Noise (typical figures) Frequency Frequency offset from Frequency offset from carrier: 10Hz carrier: 100Hz Frequency offset from carrier: 1kHz Frequency offset from carrier: 10kHz Frequency offset from carrier: 100kHz 10.0MHz -95 dBc/Hz -120 dBc/Hz -135 dBc/Hz -140 dBc/Hz -145 dBc/Hz 20.0MHz -85 dBc/Hz -110 dBc/Hz -125 dBc/Hz -135 dBc/Hz -140 dBc/Hz 40.0MHz -75 dBc/Hz -100 dBc/Hz -120 dBc/Hz -130 dBc/Hz -135 dBc/Hz Electrical Specification - maximum limiting values Frequency Range Supply Voltage 1.255 to 40.0MHz 3.3V 10% Output HCMOS 15pF 5.0V 10% Output Levels Rise Time (tr) Fall Time (tf) Duty Cycle Model Number Voh 90% Vs 8ns 8ns 45/55% CFPT-5301 Vol 10% Vs 7ns 7ns CFPT-5302 Frequency Stabilities over Operating Temperature Range Operating Temperature Ranges Frequency Stabilities v Operating Temperature Range 0.3ppm 0.5ppm 0.8ppm 1.0ppm 1.5ppm Code CC 0 to 70C Code AC* Code EC Code BC Code FC -20 to 70C Code AS* Code ES Code BS Code FS Code CS -30 to 75C - Code EU* Code BU Code FU Code CU -40 to 85C - Code EX* Code BX Code FX Code CX -55 to 95C - - - Code FA* Code CA* Ordering Example Frequency Model No. Frequency stability vs Operating Temperature Code Frequency Adjustment Code: A, B, C 10.0MHz CFPT-5301 FX A Note: *Codes may not be available for all frequencies Outline (mm) 0.75 max 5.08 max Pin Connections 1. Frequency Adjust (do not connect if Frequency Adjust option C has been selected) 7. GND 8. Output 14. +Vs 7 14 8 15.24 20.7 max 7.62 1 13.08 max 6.350.50 O0.41 TCXOs Output Waveform tf tr 90%Vs 50%Vs 10%Vs t Duty cycle = t x 100(%) T T IQD Frequency Products Ltd, Station Road, Crewkerne, Somerset TA18 8AR, United Kingdom Tel: +44 (1460) 270200; Fax: +44 (1460) 72578; Email: info@iqdfrequencyproducts.com Web: www.iqdfrequencyproducts.com