TCXOs
IQD Frequency Products Ltd, Station Road, Crewkerne, Somerset TA18 8AR, United Kingdom
Tel: +44 (1460) 270200; Fax: +44 (1460) 72578;
Email: info@iqdfrequencyproducts.com Web: www.iqdfrequencyproducts.com
CFPT-5300 LEADED TCXO
ISSUE 5; 15 DECEMBER 2009 - RoHS 2002/95/EC
Description
Ultra high stabilitie 14-pin DIL hermetically sealed TCXO with
▪wide operating temperature range. Manufactured for us by
Rakon, its wide frequency range and operating temperature
range, coupled with high stability and linear frequency pulling
make it the ideal reference oscilator. Its ability to function
down to supply voltage of 2.4V and low power consumption
makes it suitable for a wide range of applications.
Package Outline
14-pin DIL
▪
Standard Frequency
3.2, 4.096, 5, 6.4, 8.192, 9.6, 10, 12.8, 13, 14.4, 14.85,
▪16.384, 16.8, 19.2, 19.44, 19.8, 20, 32.768, 38.88, 40MHz
Other frequencies in the range 1.25MHz to 40MHz may be
available, please contact our sales ofce
Output Compatibility & Load (standard)
HCMOS 15pF max
▪
Output Compatibility & Load (options)
ACMOS 50pF max
▪
Sinewave, >1.0pk-pk, 10k
▪W // 10pF load
Clipped Sinewave, >0.8Vpk-pk, 10k
▪W // 10pF load
Sinewave and Clipped Sinewave signals are superimposed on
a DC offset, to remove this offset insert an external coupling
capacitor in series with the output
Supply Voltages
3.3V or 5.0V
▪
Non-standard supply voltages in the range 2.4V to 6.0V are
available on request, please contact our sales ofce
Supply Current
HCMOS
▪Typically: 1+Frequency(MHz)*Supply(V)*{Load(p
F)+15}*10–3mA e.g. 20MHz, 5V, 15pF ≈ 4mA
Sinewave: <8mA
▪
Clipped Sinewave
▪
1+Frequency(MHz)*1.2*{Load(pF)+30}*10–3mA
Ageing
±1ppm maximum in rst year, frequency <20MHz
▪
±3ppm maximum for 10 years, frequency <20MHz
▪
±2ppm maximum in rst year, frequency >20MHz
▪
±5ppm maximum for 10 years, frequency >20MHz
▪
Frequency Stability
Temperature: see table
▪
Supply Voltage Variation ±10% < ±0.2ppm*
▪
Load co-efcient 15pF ±5pF < ±0.2ppm*
▪*Dependent on frequency and output type
Frequency Adjustment Option A (standard):
Control Voltage 1.5V±1.0V, applied to pin 1
▪
> ±5ppm*, frequency < 20MHz
▪
> ±7ppm, frequency > 20MHz
▪
Linearity <3% (Positive)
▪
Input resistance>100k
▪W
Modulation Bandwidth>2kHz
▪
Frequency Adjustment Option B:
>±5ppm* (>±7ppm if frequency >20MHz) by means of an
▪external 100kW potentiometer connected as a variable
resistor from pin 1 to GND
Frequency Adjustment Option C:
No frequency adjustment, initial calibration @25°C <±1.0ppm
▪
*Higher adjustment range up to ±50ppm and non-standard
control voltage ranges are available on request. This may not
be compatible with all stability options. Please contact our sales
ofce
Storage Temperature Range
–55 to 95°C
▪
Environmental
Bump: IEC 60068-2-29, Test Eb, 4000 ±10 bumps at
▪390m/s2 in each of the three mutually perpendicular
planes
Shock: IEC 60068-2-27 Test Ea, 980m/s
▪2 acceleration for
6ms duration, 3 shocks in each direction along three mutually
perpendicular planes
Solderability: IEC 60068-2-20,Test T, method 1 (solder bath):
▪Temperature 235°C
Vibration: IEC 60068-2-6 Test Fc Procedure B4, 10-60Hz
▪1.5mm displacement, 60-2000Hz at 98.1m/s2, 30 minutes in
each of three mutually perpendicular planes at 1 octave per
minute
Damp Heat (steady state): IEC 60068-2-3, Test Ca, duration
▪56 days
Robustness of Termination: IEC 60068-2-21, Test Ua
▪(tensile): Force 1kg
Sealing: IEC 60068-2-17, Test Qc (gross) & Test Qk (ne)
▪
Immersion in Solvents: IEC 60068-2-45, Test Xa
▪
Marking Includes
Model + Part Number + Frequency + Pin 1 / Static sensitivity
▪identied (Triangle) + Date Code
Packaging
Bulk
▪
Minimum Order Information Required
Frequency + Model Number + Frequency Stability vs
▪Operating Temperature Code + Frequency Adjustment
Code