NEW PRODUCT BRIEF Product Databrief PI3HDX1204-B HDMI 2.0 ReDriver and DisplayPort Level Shifter with Equalization, De-emphasis & Pre-shoot Pericom Semiconductor's PI3HDX1204-B is suitable for 6.0Gbps HDMI2.0 ReDriver with programmable equalization, output swing, pre-shoot, and de-emphasis. It can also be used for the Displayport 1.2 Level Shifter application. This configuration can be used in conjunction with pin strapping or I2C programming to optimize signal performance over a variety of physical mediums. Features IISupport HDMI2.0 TMDS channels with minimal add-in jitters IIDesign IIIndependent each channel receiver Equalization, Output Swing, Pre-shoot and De-emphasis PI3HDX1204-B supports four differential data channels and extends the signals across other sink side application devices. IIBuilt-in Channel Activity Detector with selectable input termination between 50 to VDD and 200K to VDD Applications IINotebook, IITV, Strap and I2C selectable device programming mode IIPin Desktops, Mobile Computers Set-top-Box and Projectors IIEmbedded IISupply Display Systems (Pb-free & Green): 42-contact TQFN (9mm x 3.5mm) Conditional + pullup, 50-Ohm, Vcc Termination Detect CML Input - detect Equalizer Conditional Input ut - PEN Buff Bufferr Delay Equalization buffer Delay control (4-bits) buffer Output Connector O+ O+ + Amp Typical Application Diagram or 2K-ohm Limiting er Vcc Temperature Range: -40oC to 85oC IIPackaging Input threshold + Voltage: 3.3V IIIndustrial Block Diagram I+ for dual-mode DisplayPort Level Shifter CML output - amplifier O- Source Device Power De-Em Swing Pre-Sh management De-Emphasis Output Swing Pre_Shoot Select (2-bits) control (2-bits) Select (2-bits) www.pericom.com | 1-408-232-9100 TMDS[0:2]P/N CLKP/N PI3HDX1204-B HDMI ReDriver DP Level Shifter