Broadcom Condential
- 1 -
Description
Flat Top Package
The HLMP-Pxxx Series at top lamps use an untinted, non-
diused, truncated lens to provide a wide radiation pattern
that is necessary for use in backlighting applications. The at
top lamps are also ideal for use as emitters in light pipe
applications.
Dome Packages
The HLMP-6xxx Series dome lamps for use as indicators use
a tinted, diused lens to provide a wide viewing angle with a
high on-o contrast ratio. High brightness lamps use an un-
tinted, nondiused lens to provide a high luminous intensity
within a narrow radiation pattern.
Resistor Lamps
The HLMP-6xxx Series 5 volt subminiature lamps with built
in current limiting resistors are for use in applications where
space is at a premium.
Lead Congurations
All of these devices are made by encapsulating LED chips on
axial lead frames to form molded epoxy subminiature lamp
packages. A variety of package conguration options is
avail able. These include special sur face mount lead congura-
tions, gull wing, yoke lead or Z-bend. Right angle lead bends at
2.54 mm (0.100 inch) and 5.08 mm (0.200 inch) center spacing
are available for through hole mounting. For more information
refer to Standard SMT and Through Hole Lead Bend Options
for Subminiature LED Lamps data sheet.
HLMP-Pxxx Series, HLMP-Qxxx Series,
HLMP-6xxx Series, HLMP-70xx Series
Subminiature LED Lamps
Data Sheet
Features
Subminiature at top package
— Ideal for backlighting and light piping applications
Subminiature dome package
— Diused dome for wide viewing angle
— Non-diused dome for high brightness
TTL and LSTTL compatible 5V resistor lamps
Available in six colors
Ideal for space limited applications
Axial leads
Available with lead congurations for surface mount
and through hole PCB mounting
Broadcom Condential
- 2 -
HLMP-Pxxx Series, HLMP-Qxxx Series, HLMP-6xxx Series, HLMP-70xx Series Data Sheet
Device Selection Guide
Part Number: HLMP-xxxx
Standard
Red
DH AS
AlGaAs Red
High
Eciency
Red
Orange Yellow High Perf.
Green
Emerald
Green
Device
Description
Device
Outline
Drawing
P005 P105 P205 P405 P305 P505 P605 Untinted, Non-diused,
Flat Top A
P102 P202 P402 P302 P502 Untinted, Diused,
Flat Top A
6000 Q100 6300 Q400 6400 6500 Q600 Tinted, Diused B
Q105 6305 Q405 6405 6505 Q605 Untinted, Nondiused,
High Brightness B
Q150 7000 7019 7040 Tinted, Diused, Low
Current B
Q155 Nondiused,
Low Current B
6600 6800 Tinted, Diused, Resistor,
5V, 10 mA B
6620 6720 6820 Diused, Resistor, 5V,
4 mA B
0.50 (0.020) REF.
0.94
1.24
(0.037)
(0.049)
2.92 (0.115)
MAX.
0.76
0.89
(0.030)
(0.035) R.
0.63
0.38
(0.025)
(0.015)
2.03 (0.080)
1.78 (0.070)
0.79 (0.031)
0.53 (0.021)
0.46
0.56
(0.018)
(0.022)
0.25 (0.010) MAX.
NOTE 2
0.20 (0.008) MAX.
CATHODE
1.65
1.91
(0.065)
(0.075) DIA.
ANODE
11.68
10.67
(0.460)
(0.420)
BOTH SIDES
0.18
0.23
(0.007)
(0.009)
2.08
2.34
(0.082)
(0.092)
CATHODE
STRIPE
2.21
1.96
(0.087)
(0.077)
Diused and Nondiused
Package Dimensions
Flat Top Lamps
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETRES (INCHES).
2. PROTRUDING SUPPORT TAB IS CONNECTED TO CATHODE LEAD.
3. LEAD POLARITY FOR AlGaAs LAMPS IS OPPOSITE TO THE LEAD
POLARITY OF SUBMINIATURE LAMPS USING OTHER TECHNOLOGIES.
0.46
0.56
(0.018)
(0.022)
1.40
1.65
(0.055)
(0.065)
0.25 (0.010) MAX.
NOTE 2
0.20 (0.008) MAX.
0.50 (0.020) REF.
CATHODE
1.65
1.91
(0.065)
(0.075) DIA.
ANODE
11.68
10.67
(0.460)
(0.420)
BOTH SIDES
1.14
1.40
(0.045)
(0.055) 0.63
0.38
(0.025)
(0.015)
2.21
1.96
(0.087)
(0.077)
0.18
0.23
(0.007)
(0.009)
0.79 (0.031) MAX.
2.44
1.88
(0.096)
(0.074)
2.08
2.34
(0.082)
(0.092)
CATHODE
STRIPE
Broadcom Condential
- 3 -
HLMP-Pxxx Series, HLMP-Qxxx Series, HLMP-6xxx Series, HLMP-70xx Series Data Sheet
Notes:
1. See Figure 5 for current derating vs. ambient temperature. Derating is not applicable to resistor lamps.
2. Refer to Figure 6 showing Max. Tolerable Peak Current vs. Pulse Duration to establish pulsed operating conditions.
3. The transient peak current is the maximum non-recurring peak current the device can withstand without failure. Do not operate these lamps at this high current.
Absolute Maximum Ratings (TA = 25°C)
Parameter Standard
Red
DH AS
AlGaAs
Red
High E.
Red Orange Yellow High Perf.
Green
Emerald
Green Unit
DC Forward Current[1] 50 30 30 30 20 30 30 mA
Peak Forward Current[2] 1000 300 90 90 60 90 90 mA
DC Forward Voltage
(Resistor Lamps Only) 6 6 6 6 V
Reverse Voltage (IR = 100 µA) 5 5 5 5 5 5 5 V
Transient Forward Current
(10 µs Pulse) 2000 500 500 500 500 500 500 mA
Operating Temperature Range
°C
Non-Resistor Lamps –55 to +100 –40 to +100 –55 to +100 –40 to +100 –20 to +100
Resistor Lamps –40 to +85 –20 to +85
Storage Temperature Range –55 to +100
For Thru Hole Devices:
Wave Soldering Temperature
[1.6 mm (0.063 in.) from body]
260°C for 5 seconds
For Surface Mount Devices:
Reow Soldering Temperature 260°C for 20 seconds
Figure 1: Proper Right Angle Mounting to a PCB to Prevent Protruding Cathode Tab from Shorting to Anode Connection
HLMP-PXXX Anode/Cathode
NO. ANODE DOWN. YES. CATHODE DOWN.
CATHODE
TAB
Broadcom Condential
- 4 -
HLMP-Pxxx Series, HLMP-Qxxx Series, HLMP-6xxx Series, HLMP-70xx Series Data Sheet
Electrical/Optical Characteristics (TA = 25°C)
Standard Red
Device
HLMP- Parameter Symbol Min. Typ. Max. Unit Test Conditions
6000-E00xx
Luminous Intensity[1] IV
0.63 1.2
mcd IF = 10 mA6000-G00xx 1.60 3.2
P005-F00xx 1.0 2.5
All
Forward Voltage VF1.4 1.6 2.0 V IF = 10 mA
Reverse Breakdown Voltage VR5.0 12.0 V IR = 100 µA
6000 Included Angle Between
Half Intensity Points[2] 2θ½
90
Deg.
P005 125
All
Peak Wavelength λPEAK 655 nm
Dominant Wavelength[3] λd640 nm
Spectral Line Half Width Δλ1/2 24 nm
Speed of Response τs15 ns
Capacitance C 100 pF VF = 0; f = 1 MHz
Thermal Resistance RθJ-PIN 170 °C/W Junction-to-Cathode Lead
Luminous Ecacy[4] ηv65 lm/W
Broadcom Condential
- 5 -
HLMP-Pxxx Series, HLMP-Qxxx Series, HLMP-6xxx Series, HLMP-70xx Series Data Sheet
DH AS AlGaAs Red
Device
HLMP- Parameter Symbol Min. Typ. Max. Unit Test Conditions
P102-F00xx
Luminous Intensity[1] IV
1.0 20.0
mcd
IF = 20 mA
P105-L00xx 10.0 30.0
P105-NP000 25 80
Q100-M00xx 16 45
Q100-N00xx 25.0 45.0
Q100-PQ000 40 125
Q105-P00xx 40 200
Q105-ST000 160 500
IF = 1 mAQ150-F00xx 1.0 1.8
Q155-F00xx 1.0 4.0
Q100
Forward Voltage VF
1.8 2.2
V
IF = 20 mA
Q150/Q155 1.6 1.8 IF = 1 mA
All Reverse Breakdown Voltage VR5.0 15.0 V IR = 100 µA
P105
Included Angle Between
Half Intensity Points[2] 2θ½
125
Deg.Q100/Q150 90
Q105/Q155 28
All
Peak Wavelength λPEAK 645 nm Measured at Peak
Dominant Wavelength[3] λd637 nm
Spectral Line Half Width Δλ1/2 20 nm
Speed of Response τs30 ns Exponential Time Constant;
e-t/ts
Capacitance C 30 pF VF = 0; f = 1 MHz
Thermal Resistance RθJ-PIN 170 °C/W Junction-to-Cathode Lead
Luminous Ecacy[4] ηv80 lm/W
Broadcom Condential
- 6 -
HLMP-Pxxx Series, HLMP-Qxxx Series, HLMP-6xxx Series, HLMP-70xx Series Data Sheet
High Eciency Red
Device
HLMP- Parameter Symbol Min. Typ. Max. Unit Test Conditions
P202-F00xx
Luminous Intensity[1] IV
1.0 5.0
mcd
P205-F00xx 1.0 8.0 IF = 10 mA
6300-F00xx 1.0 10.0
6300-KL000 6.3 20.0
6305-L00xx 10.0 40.0
7000-D00xx 0.4 1.0 IF = 2 mA
6600-G00xx 1.6 5.0 VF = 5.0V
6620-F00xx 1.0 2.0
All Forward Voltage
(Nonresistor Lamps) VF1.5 1.8 3.0 V IF = 10 mA
6600 Forward Current
(Resistor Lamps) IF
9.6 13.0
mA VF = 5.0V
5620 3.5 5.0
All Reverse Breakdown Voltage VR5.0 30.0 V IR = 100 µA
P205
Included Angle Between
Half Intensity Points[2] 2θ½
125
Deg.6305 28
All Diused 90
All
Peak Wavelength λPEAK 635 nm Measured at Peak
Dominant Wavelength[3] λd626 nm
Spectral Line Half Width Δλ1/2 40 nm
Speed of Response τs90 ns
Capacitance C 11 pF VF = 0; f = 1 MHz
Thermal Resistance RθJ-PIN 170 °C/W Junction-to-Cathode Lead
Luminous Ecacy[4] ηv145 lm/W
Broadcom Condential
- 7 -
HLMP-Pxxx Series, HLMP-Qxxx Series, HLMP-6xxx Series, HLMP-70xx Series Data Sheet
Orange
Device
HLMP- Parameter Symbol Min. Typ. Max. Unit Test Conditions
P402-F00xx
Luminous Intensity IV
1.0 4.0
mcd IF = 10 mA
P405-F00xx 1.0 6
P405-JK000 4.0 12.5
Q400-F00xx 1.0 8
Q405-H00xx 2.5 14
All
Forward Voltage VF1.5 1.9 3.0 V IF = 10 mA
Reverse Breakdown Voltage VR5.0 30.0 V IR = 100 µA
P40x Included Angle Between
Half Intensity Points[2] 2θ½
125
Deg.
Q40x 90
All
Peak Wavelength λPEAK 600 nm
Dominant Wavelength[3] λd602 nm Measured at Peak
Spectral Line Half Width Δλ1/2 40 nm
Speed of Response τs260 ns
Capacitance C 4 pF VF = 0; f = 1 MHz
Thermal Resistance RθJ-PIN 170 °C/W Junction-to-Cathode Lead
Luminous Ecacy[4] ηv380 lm/W
Broadcom Condential
- 8 -
HLMP-Pxxx Series, HLMP-Qxxx Series, HLMP-6xxx Series, HLMP-70xx Series Data Sheet
Yellow
Device
HLMP- Parameter Symbol Min. Typ. Max. Unit Test Conditions
P302-F00xx
Luminous Intensity IV
1.0 3.0
mcd
IF = 10 mA
P305-F00xx 1.0 4.0
6400-F00xx 1.0 9.0 12.5
6400-JK000 4.0
6405-J00xx 3.6 20
6405-MN0xx 16 50
7019-D00xx 0.4 0.6 IF = 2 mA
6720-F00xx 0.9 2.0
All Forward Voltage
(Nonresistor Lamps) VF2.0 2.4 V IF = 10 mA
6720 Forward Current
(Resistor Lamps) IF3.5 5.0 mA VF = 5V
All Reverse Breakdown Voltage VR5.0 50.0 V
P305
Included Angle Between
Half Intensity Points[2] 2θ½
125
Deg.6405 28
All Diused 90
All
Peak Wavelength λPEAK 583 nm Measured at Peak
Dominant Wavelength[3] λd585 nm
Spectral Line Half Width Δλ1/2 36 nm
Speed of Response τs90 ns
Capacitance C 15 pF VF = 0; f = 1 MHz
Thermal Resistance RθJ-PIN 170 °C/W Junction-to-Cathode Lead
Luminous Ecacy[4] ηv500 lm/W
Broadcom Condential
- 9 -
HLMP-Pxxx Series, HLMP-Qxxx Series, HLMP-6xxx Series, HLMP-70xx Series Data Sheet
High Performance Green
Device
HLMP- Parameter Symbol Min. Typ. Max. Unit Test Conditions
P502-F00xx
Luminous Intensity IV
1.0 3.0
mcd
P505-F00xx 1.6 6.3 IF = 10 mA
6500-F00xx 1.0 7.0
6505-L00xx 10.0 40.0
7040-D00xx 0.4 0.6 IF = 2 mA
6800-G00xx 1.6 5.0 VF = 5V
6820-F00xx 1.0 2.0
All Forward Voltage
(Nonresistor Lamps) VF2.1 2.7 V IF = 10 mA
6800 Forward Current
(Resistor Lamps) IF
9.6 13.0
mA VF = 5V
6820 3.5 5.0
All Reverse Breakdown Voltage VR5.0 50.0 V IR = 100 µA
P505
Included Angle Between
Half Intensity Points[2] 2θ½
125
Deg.6505 28
All Diused 90
All
Peak Wavelength λPEAK 565 nm
Dominant Wavelength[3] λd569 nm
Spectral Line Half Width Δλ1/2 28 nm
Speed of Response τs500 ns
Capacitance C 18 pF VF = 0; f = 1 MHz
Thermal Resistance RθJ-PIN 170 °C/W Junction-to-Cathode Lead
Luminous Ecacy[4] ηv595 lm/W
Broadcom Condential
- 10 -
HLMP-Pxxx Series, HLMP-Qxxx Series, HLMP-6xxx Series, HLMP-70xx Series Data Sheet
Note:
1. Please refer to Application Note 1061 for information comparing standard green and emerald green light output degradation.
High Performance Green[1]
Device
HLMP- Parameter Symbol Min. Typ. Max. Unit Test Conditions
P605-F00xx
Luminous Intensity IV
1.0 1.5
mcd IF = 10 mAQ600-F00xx 1.0 1.5
Q605-F00xx 1.0 7.5
All
Forward Voltage VF2.2 3.0 V IF = 10 mA
Reverse Breakdown Voltage VR5.0 V IR = 100 µA
P605 Included Angle Between
Half Intensity Points[2] 2θ½
125
Deg.
Q60x 90
All
Peak Wavelength λPEAK 558 nm
Dominant Wavelength[3] λd560 nm Measued at Peak
Spectral Line Half Width Δλ1/2 24 nm
Speed of Response τs3100 ns
Capacitance C 35 pF VF = 0; f = 1 MHz
Thermal Resistance RθJ-PIN 170 °C/W Junction-to-Cathode Lead
Luminous Ecacy[4] ηv656 lm/W
Broadcom Condential
- 11 -
HLMP-Pxxx Series, HLMP-Qxxx Series, HLMP-6xxx Series, HLMP-70xx Series Data Sheet
Standard Red, DH As AlGaAs Red
Standard Red and DH AS AlGaAs Red High Eciency Red, Orange, Yellow, High Performance Green,
and Emerald Green
HER, Orange, Yellow, and High Performance
Green, and Emerald Green
Low Current
Figure 2: Relative Intensity vs. Wavelength
Figure 3: Forward Current vs. Forward Voltage (Non-Resistor Lamp)
Figure 4: Relative Luminous Intensity vs. Forward Current (non-resistor lamp)
HLMP-PXXX fig 2b
FORWARD CURRENT – mA
100
0
FORWARD VOLTAGE – V
80
60
50
70
20
0
10
30
40
0.5 1 1.5 2 2.5 3 3.5
90
HIGH
PERFORMANCE
GREEN,
EMERALD
GREEN
YELLOW
HIGH EFFICIENCY
RED/ORANGE
Broadcom Condential
- 12 -
HLMP-Pxxx Series, HLMP-Qxxx Series, HLMP-6xxx Series, HLMP-70xx Series Data Sheet
Figure 5: Relative Eciency (Luminous Intensity per Unit Current) vs. Peak Current (Non-Resistor Lamps)
Figure 6: Maximum Forward DC Current vs. Ambient Temperature (Derating based on TJ Max. = 110°C [non-resistor lamps])
Figure 7: Maximum Tolerable Peak Current vs. Pulse Duration (IDC Max. as per Max. ratings) (non-resistor lamps)
Standard Red
DH As AlGaAs RedStandard Red
HER, Orange, Yellow, and High
Performance Green
DH As AlGaAs Red
HER, Orange, Yellow, and High Performance
Green, and Emerald Green
Broadcom Condential
- 13 -
HLMP-Pxxx Series, HLMP-Qxxx Series, HLMP-6xxx Series, HLMP-70xx Series Data Sheet
Figure 10: Relative Intensity vs. Angular Displacement
Figure 8: Resistor Lamp Forward Current vs. Forward Voltage Figure 9: Resistor Lamp Luminous Intensity vs. Forward Voltage
Broadcom Condential
- 14 -
HLMP-Pxxx Series, HLMP-Qxxx Series, HLMP-6xxx Series, HLMP-70xx Series Data Sheet
Ordering Information
HLMx-XXXX-X X X X X
4 x 4 Prod.
Part
Number
Min. Iv Bin
Max. Iv Bin
Color Bin
Selection
Packaging
Option
Intensity Bin Limits
Bin Min. Max.
A 0.10 0.20
B 0.16 0.32
C 0.25 0.50
D 0.40 0.80
E 0.63 1.25
F 1.00 2.00
G 1.60 3.20
H 2.50 5.00
J 4.00 8.00
K 6.30 12.50
L 10.00 20.00
M 16.00 32.00
N 25.00 50.00
P 40.00 80.00
Q 63.00 125.00
R 100.00 200.00
S 160.00 320.00
T 250.00 500.00
U 400.00 800.00
V 630.00 1250.00
W 1000.00 2000.00
X 1600.00 3200.00
Y 2500.00 5000.00
Color Bin Limits
Package Bin Min. Max.
Emerald Green 0 Full Distribution
9 552 556
8 555 559
7 558 562
6 561 565
Green 0 Full Distribution
6 561 565
5 564 568
4 567 571
3 570 574
2 573 577
Yellow 0 Full Distribution
1 581.5 585.0
2 584.0 587.5
3 586.5 590.0
4 589.0 592.5
5 591.5 593.5
6 591.5 595.0
7 594.0 597.5
Orange 0 Full Distribution
1 596.5 600.0
2 599.0 602.5
3 601.5 604.0
4 603.8 608.2
5 606.8 611.2
6 609.8 614.2
7 612.8 617.2
8 615.8 620.2
Broadcom Condential
- 15 -
HLMP-Pxxx Series, HLMP-Qxxx Series, HLMP-6xxx Series, HLMP-70xx Series Data Sheet
Mechanical Option
00 Straight Leads, Bulk Packaging, Quantity of 500 Parts
10 Right Angle Housing, Bulk Packaging, Quantity of 500 Parts
11 Gull Wing Leads, 12 mm Tape on 7 in. Dia. Reel, 1500 Parts per Reel
12 Gull Wing Lead, Bulk Packaging, Quantity of 500 Parts
14 Gull Wing Leads, 12 mm Tape on 13 in. Dia. Reel, 6000 Parts per Reel
21 Yoke Leads, 12 mm Tape on 7 in. Dia. Reel, 1500 Parts per Reel
22 Yoke Leads, Bulk Packaging, Quantity of 500 Parts
24 Yoke Leads, 12 mm Tape on 13 in. Dia. Reel, 6000 Parts per Reel
31 Z-Bend Leads, 12 mm Tape on 7 in. Dia. Reel, 1500 Parts per Reel
32 Z-Bend Leads, Bulk Packaging, Quantity of 500 Parts
34 Z-Bend Leads, 12 mm Tape on 13 in. Dia. Reel, 6000 Parts per Reel
1L 2.54 mm (0.100 inch) Center Lead Spacing, Long Leads; 10.4 mm (0.410 in.)
1S 2.54 mm (0.100 inch) Center Lead Spacing, Short Leads; 3.7 mm (0.145 in.)
2L 5.08 mm (0.200 inch) Center Lead Spacing, Long Leads; 10.4 mm (0.410 in.)
2S 5.08 mm (0.200 inch) Center Lead Spacing, Short Leads; 3.7 mm (0.145 in.)
Note: All Categories are established for classication of products. Products may not be available in all categories. Please contact your local Avago representative for
further clarication/information.
For product information and a complete list of distributors, please go to our web site:
www.broadcom.com.
Broadcom, the pulse logo, Connecting everything, Avago Technologies, Avago, the A logo, and R2Coupler are
among the trademarks of Broadcom and/or its aliates in the United States, certain other countries and/or the
EU.
Broadcom Proprietary and Condential. Copyright © 2017 Broadcom. All Rights Reserved. The term
“Broadcom” refers to Broadcom Limited and/or its subsidiaries.
Broadcom reserves the right to make changes without further notice to any products or data herein to
improve reliability, function, or design. Information furnished by Broadcom is believed to be accurate and
reliable. However, Broadcom does not assume any liability arising out of the application or use of this
information, nor the application or use of any product or circuit described herein, neither does it convey any
license under its patent rights nor the rights of others.
AV02-3609EN – April 12, 2017
Description
Subminiature lamps (HLMX-PXXX, HLMX-QXXX, HLMP-
6XXX, HLMP-70XX) are available with the above standard
options. Subminiature Lamps with Options 11, 12, 21, 22,
31, and 32 are suitable for surface mount applications
and their leads are formed with gull wing, yoke bend and
Z bend respectively. They are available in Tape and Reel
(compatible to ANSI/EIA RS-481) or bulk. Options 1L, 1S,
2L, and 2S are right angle lead bends suitable for through
hole applications.
Ordering Information
To order Subminiature Lamps packaged with these stan-
dard options, include the appropriate option code along
with the device catalog part number. Example: to order the
HLMP-6300-F00xx with Option 11 gull wing leads in 12 mm
embossed tape on 178 mm (7 inch) diameter reels, with
1500 lamps per reel; order as follows: HLMP-6300-F0011.
Order quantities must be placed in reel increments only.
Orders for partial reels will not be accepted. For additional
information, please contact your local Avago Technologies
sales oce or franchised distributor for assistance.
HLMX-XXXX-X X X X X
4 x 4 Prod. Part Number
Min. Iv Bin
Max. Iv Bin
Color Bin Selection
Packaging Option
Features
• Surface mount lead congurations
• Right angle lead bend for through hole mounting
• Tape and reel in accordance with ANSI/EIA RS-481
specications
Option 11, 12, 21, 22, 31, 32, 1L, 1S, 2L, 2S
Standard SMT and Through Hole Lead Bend Options
for Subminiature LED Lamps
Data Sheet
2
Selection Guide
Package
Option Outline
Code Package Conguration Drawing
11 Gull Wing Leads, 12 mm Tape on 7 in. Dia. Reel, Surface Mount A, H, K, L
1500 Parts per Reel[1]
12 Gull Wing Lead, Bulk Packaging, Quantity of 500 Parts[2]
14 Gull Wing Leads, 12 mm Tape on 13 in. Dia. Reel,
6000 Parts per Reel[1]
21 Yoke Leads, 12 mm Tape on 7 in. Dia. Reel B, I, K, L
1500 Parts per Reel[1]
22 Yoke Leads, Bulk Packaging, Quantity of 500 Parts[2]
24 Yoke Leads, 12 mm Tape on 13 in. Dia. Reel,
6000 Parts per Reel[1]
31 Z-Bend Leads, 12 mm Tape on 7 in. Dia. Reel C, J, K, L
1500 Parts per Reel[1]
32 Z-Bend Leads, Bulk Packaging, Quantity of 500 Parts[2]
34 Z-Bend Leads, 12 mm Tape on 13 in. Dia. Reel,
6000 Parts per Reel[1]
1L 2.54 mm (0.100 inch) Long Leads; 10.4 mm (0.410 in.) Right Angle Lead D
1S Short Leads; 3.7 mm (0.145 in.) E
2L 5.08 mm (0.200 inch) Long Leads; 9.2 mm (0.364 in.) F
2S Short Leads; 3.7 mm (0.145 in.) G
Notes:
1. SMT lamps are supplied in 12 mm embossed carrier tape. Minimum order is for one full reel, either 7 inch or 13 inch. All other order quantities
must be in reel increments only. Orders for partial reels are not accepted.
2. Vapor barrier bags are used for bulk packaging.
Center Lead Spacing
Center Lead Spacing
Lead
Congurations
Bends for
Through Hole
Mounting
3
(B) “Yoke” Lead, Options 21, 22, and 24
Package Dimensions, Lead Bend Options
(A) Gull Wing Lead, Option 11, 12, and 14
Pkg B) Lamp – Yoke Lead
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
CATHODE
STRIPE
7.62 (0.300) MAX.
0.79 (0.031)
0.53 (0.021)
0.13 (0.005) TYP.
0.33 (0.013) R. TYP.
CATHODE
ANODE
3.45
(0.136)
NOM.
1.07 (0.042) TYP.
Pkg A) Lamp – Gull Wing Lead
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
CATHODE
STRIPE
0.13 (0.005) R TYP.
0.13 (0.005)
MAX.
0.79 (0.031)
0.53 (0.021)
3.81 (0.150) MAX.
CATHODE
ANODE
4
(C) Z-Bend Lead, Option 31, 32, and 34
(D) Rt. Angle Bend Option 1L
Pkg C) Lamp – Z-Bend
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
CATHODE
STRIPE
0.79 (0.031)
0.53 (0.021)
4.06 (0.160)
4.57 (0.180)
0.76 (0.030)
0.51 (0.020)
5.59 (0.220)
6.10 (0.240)
3.05 (0.120)
NOM.
CATHODE
ANODE
5
(E) Rt. Angle Bend Option 1S
Pkg E) Lamp – Rt Angle 1S
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
CATHODE
STRIPE
3.43 (0.135)
3.94 (0.155)
2.54 (0.100)
NOM.
6
(F) Rt. Angle Bend Option 2L
(G) Rt. Angle Bend Option 2S
Pkg F) Lamp – Rt Angle 2L
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
CATHODE
STRIPE
9.50 (0.374)
8.92 (0.351)
5.08 (0.200)
NOM.
Pkg G) Lamp – Rt Angle 2S
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
CATHODE
STRIPE
3.43 (0.135)
3.94 (0.155)
5.08 (0.200)
NOM.
7
Package Dimensions: Surface Mount Tape and Reel Options
(H) 12 mm Tape and Reel, Gull Wing Lead
PUSH PIN
HOLE, GULL
WING LEAD,
DOME ONLY
NOTES:
1. EMPTY COMPONENT POCKETS SEALED WITH TOP COVER TAPE.
2. MINIMUM LEADER LENGTH AT EITHER END OF THE TAPE IS 500 mm.
3. THE MAXIMUM NUMBER OF CONSECUTIVE MISSING LAMPS IS TWO.
4. IN ACCORDANCE WITH ANSI/EIA RS-481 SPECIFICATIONS, THE
CATHODE IS ORIENTED TOWARDS THE TAPE SPROCKET HOLE.
8
(I) 12 mm Tape and Reel, “Yoke” Lead
NOTES:
1. EMPTY COMPONENT POCKETS SEALED WITH TOP COVER TAPE.
2. MINIMUM LEADER LENGTH AT EITHER END OF THE TAPE IS 500 mm.
3. THE MAXIMUM NUMBER OF CONSECUTIVE MISSING LAMPS IS TWO.
4. IN ACCORDANCE WITH ANSI/EIA RS-481 SPECIFICATIONS, THE
CATHODE IS ORIENTED TOWARDS THE TAPE SPROCKET HOLE.
9
(J) 12 mm Tape and Reel, Z-Bend Lead
Embossed Carrier All Dimensions
Tape Dimensions Are in Millimeters
Per ANSI/EIA (Inches).
Standard RS-481.
Yoke and
Gull Wing Dome Gull Wing Flat Top Yoke Dome Z-Bend Dome Z-Bend Flat Top
D 1.55 (0.061 ± 0.002) Dia. 1.55 (0.061 ± 0.002) Dia. 1.55 (0.061 ± 0.002) Dia. 1.50 + 0.10 1.50 + 0.10
(0.059 + 0.004) Dia. (0.059 + 0.004) Dia.
D1 1.0 (0.039) Dia. Min. N/A (No Push Pin Hole) N/A (No Push Pin Hole) 1.50 + 0.25 N/A (No Push Pin Hole)
(0.059 + 0.010)
D2 20.2 (0.795) Dia. Min. 20.2 (0.795) Dia. Min. 20.2 (0.795) Dia. Min. 20.2 (0.795) Dia. Min. 20.2 (0.795) Dia. Min.
E 1.75 ± 0.1 (0.069) 1.75 ± 0.1 (0.069) 1.75 ± 0.1 (0.069) 1.75 ± 0.1 (0.069) 1.75 ± 0.1 (0.069)
F
K0 3.05 ± 0.1 (0.120) Typ. 2.54 ± 0.1 (0.100) Typ. 3.05 ± 0.1 (0.120) Typ. 2.97 ± 0.1 (0.117) Typ. 3.05 ± 0.1 (0.120) Typ.
P 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ.
P0 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ.
P2 2.0 (0.079 ± 0.002) 2.0 (0.079 ± 0.002) 2.0 (0.079 ± 0.002) 2.0 (0.079 ± 0.002) 2.0 (0.079 ± 0.002)
t 0.3 (0.012) Typ. 0.3 (0.012) Typ. 0.3 (0.012) Typ. 0.305 ± 0.013 0.305 ± 0.013
(0.0120 ± 0.0005) (0.0120 ± 0.0005)
W 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012)
Reel Dimensions All Dimensions
Per ANSI/EIA Are in Millimeters
Standard RS-481. (Inches).
7 inch Reel 13 Inch Reel
A 178.0 ± 2.0 (7.0 ± 0.08) Dia. 330 (12.9) Dia. Max.
C 13.0 (0.512) Dia. Typ. 13.0 (0.512) Dia. Typ.
N 50.0 (1.97) Min. 100.0 (3.93) Min.
T 18.4 (0.72) mMax. 18.4 (0.72) Max.
5.50 ± 0.05 (0.217 ± 0.002)
10
Storage Condition: 5 to 30˚C @ 60% RH max.
Baking is required under the following conditions:
a) Humidity Indicator Card is >10% when read at 23 ± 5°C.
b) The pack has been opened for more than 1 week.
Baking recommended condition: 60 ± 5˚C for 20 hours.
(K) 12 mm Tape and Reel
PART:
LOT NO:
CUST PART: CAT:
QTY: BIN:
D/C: QA INSP.
TAPE DATE: C/O:
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2008 Avago Technologies. All rights reserved. Obsoletes 5989-1206EN
AV02-0069EN - September 2, 2008
(L) Recommended Reow Soldering Prole and Soldering Pad Pattern for SMT Options
Recommended SnPb reow soldering prole.
Wait until device has cooled to room temperature before handling.
Recommended soldering pad pattern for gull wing leads 11, 12, and 14.
Recommended soldering pad pattern for yoke leads 21, 22, and 24. Recommended soldering pad pattern for Z-bend leads 31, 32, and 34.
3.30 (0.130)
6.60 (0.260)
0.64 (0.025)
1.27
(0.50) 0.45
(0.018)
0.89
(0.035)
#27 DRILL
3.73 (0.147) DIA.
CLEARANCE HOLE
THROUGH PC BOARD
DIMENSIONS ARE IN
MILLIMETERS (INCHES)
3.30 (0.130)
6.60 (0.260)
1.27
(0.50)
0.45
(0.018)
0.89
(0.035)
#27 DRILL
3.73 (0.147) DIA.
CLEARANCE HOLE
THROUGH PC BOARD
DIMENSIONS ARE IN
MILLIMETERS (INCHES)
0.89
(0.035)
1.78
(0.070)
3.58 (0.140)
0.45
(0.018)
0.45 (0.018)
0.89 (0.035)
230
10 SEC. MAX.
2-3°C/SEC.
120 SEC. MAX.
TIME
TEMPERATURE
183°C
125-170°C
3-4°C/SEC.
60-150
SEC.
3°C/SEC. MAX.
25°C
50°C
°C MAX.
+5
–0
Recommended Pb-free reow soldering prole.
217 °C
200 °C
60 - 120 SEC.
6°C/SEC. MAX.
3°C/SEC. MAX.
3°C/SEC. MAX.
150 °C
255 - 260 °C
100 SEC. MAX.
(Acc. to J-STD-020C)
10 - 30 SEC.
TIME
TEMPERATURE