MX555ABA150M000
Ultra-Low Jitter 150MHz LVPECL XO
ClockWorks® FUSION
General Description
The MX555ABA150M000 is an ultra-low phase jitter
XO with LVPECL output optimized for high line rate
applications.
Applications
• SAS
• Storage
Features
• 150MHz LVPECL
• Typical phase noise:
- 98fs (Integration range: 1.875MHz-20MHz)
• ±50ppm total frequency stability
• -40°C to +85°C temperature range
• Industry standard 6-Pin 5mm x 3.2mm LGA
package
Absolute Maximum Ratings
Supply Voltage (VIN)..................................................+4.6V
Lead Temperature (soldering, 10s)..............................260°C
Storage Temperature (T ).............................................125°C
S
ESD Rating (HBM).........................................................2kV
Operating Ratings
Supply Voltage (VIN).......................+2.375V to +3.63V
Ambient Temperature (TA)....................-40°C to +85°C
Electrical Characteristics
VDD = 2.375 - 3.63V, TA = -40°C to +85°C, outputs terminated with 50 Ohms to VDD - 2V.¹
Symbol Parameter Condition Min. Typ. Max. Units
IDD Supply Current 120 mA
F0 Center Frequency 150 MHz
Frequency Stability Note 2 ±50 ppm
Øj Phase Noise Integration Range (12kHz to 20MHz)
Integration Range (1.875MHz to 20MHz) 143
98 fsRMS
Tstart Start-Up Time 20 ms
TR/TF Rise/Fall time 85 350 ps
Duty Cycle 45 55 %
VOH Output High Voltage LVPECL output levels VDD - 1.35 VDD - 1.01 VDD - 0.8 V
VOL Output Low Voltage LVPECL output levels VDD - 2.0 VDD - 1.78 VDD - 1.6 V
Vswing Peak to Peak Output
Voltage Swing 0.65 0.77 0.95 V
Notes:
1. Guaranteed after thermal equilibrium.
2. Inclusive of initial accuracy, temperature drift, aging, shock, vibration.
ClockWorks is a registered trademark of Microchip Technology Inc.
Microchip Technology Inc. http://www.microchip.com
September 06, 2016 Revision 1.0
tcghelp@microchip.comMX555AB1-2500
Microchip Technology Inc. MX555ABA150M000
Ordering Information
Ordering Part Number Marking Line 1 Marking Line 3 Shipping Package
MX555ABA150M000 MX555A BA1500 Tube 6-Pin 5mm x 3.2mm LGA
MX555ABA150M000 TR MX555A BA1500 Tape and Reel 6-Pin 5mm x 3.2mm LGA
Devices are Green and RoHS compliant. Sample material may have only a partial top mark.
Pin Configuration
OE
DNC
GND
VDD
/Q
Q
Pin Description
Pin Number Pin Name Pin Type Pin Level Pin Function
1 OE I, SE LVCMOS Output Enable, disables output to tri-state,
0 = Disabled, 1 = Enabled, 50k Ohms Pull-Up
2 DNC Make no connection, leave floating.
3 GND PWR Power Supply Ground
4, 5 Q, /Q O, Diff LVPECL Clock Output Frequency = 150MHz
6 VDD PWR Power Supply
September 06, 2016 2 Revision 1.0
tcghelp@microchip.comMX555AB1-2500
Microchip Technology Inc. MX555ABA150M000
Package Information and Recommended Land Pattern for 6-Pin LGA³
6-Pin LGA (5x3.2mm)
Note:
3. Package information is correct as of the publication date. For updates and most current information, go to www.microchip.com.
Microchip Technology Inc. http://www.microchip.com
Microchip makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This
information is not intended as a warranty and Microchip does not assume responsibility for its use. Microchip reserves the right to change circuitry,
specifications and descriptions at any time without notice. No license, whether express, implied, arising by estoppel or otherwise, to any
intellectual property rights is granted by this document. Except as provided in Microchip's terms and conditions of sale for such products, Microchip
assumes no liability whatsoever, and Microchip disclaims any express or implied warranty relating to the sale and/or use of Microchip products
including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other
intellectual property right.
© 2016 Microchip Technology Inc.
September 06, 2016 4 Revision 1.0
tcghelp@microchip.comMX555AB1-2500
