54ACT373FMQB - National Semiconductor

Original Creation Date: 07/03/96

Last Update Date: 03/17/97

Last Major Revision Date: 07/03/96

MN54ACT373-X REV 1B0 MICROCIRCUIT DATA SHEET

Octal Transparent Latch With 3-State Outputs

General Description

The ACT373 consists of eight latches with 3-state outputs for bus organized system

applications. The flip-flops appear transparent to the data when Latch Enable (LE) is

HIGH. When LE is LOW, the data that meets the setup times is latched. Data appears on

the bus when the Output Enable (OE) is LOW. When OE is HIGH the bus output is in the high

impedance state.

NS Part Numbers

54ACT373DMQB

54ACT373FMQB

54ACT373LMQB

Industry Part Number

54ACT373

Prime Die

D373

Processing

MIL-STD-883, Method 5004

Quality Conformance Inspection

MIL-STD-883, Method 5005

Subgrp Description Temp ( C)

1 Static tests at +25 C

2 Static tests at +125 C

3 Static tests at -55 C

4 Dynamic tests at +25 C

5 Dynamic tests at +125 C

6 Dynamic tests at -55 C

7 Functional tests at +25 C

8A Functional tests at +125 C

8B Functional tests at -55 C

9 Switching tests at +25 C

10 Switching tests at +125 C

11 Switching tests at -55 C

MICROCIRCUIT DATA SHEET

MN54ACT373-X REV 1B0

Features

- Icc and Ioz reduced by 50%

- Eight latches in a single package

- TRI-STATE outputs for bus interfacing

- Outputs source/sink 24 mA

- ACT373 has TTL-compatible inputs

- Standard Military Drawing (SMD)

- ACT373: 5962-87556

MICROCIRCUIT DATA SHEET

MN54ACT373-X REV 1B0

(Absolute Maximum Ratings)

(Note 1)

Supply Voltage (Vcc) -0.5V to +7.0V

DC Input Diode Current (Iik) -20 mAVi = -0.5V +20 mAVi = Vcc +0.5V

DC Input Voltage (Vi) -0.5V to Vcc +0.5V

DC Output Diode Current (Iok) -20 mAVo = -0.5V +20 mAVo = Vcc +0.5V

DC Output Voltage (Vo) -0.5V to Vcc +0.5V

DC Output Source or Sink Current (Io) +50 mA

DC Vcc or Ground Current per Output Pin (Icc or Ignd) +50 mA

Storage Temperature (Tstg) -65 C to +150 C

Junction Temperature (Tj) 175 CCDIP

Note 1: Absolute maximum ratings are those values beyond which damage to the device may

occur. The databook specifications should be met, withouT exception, to ensure that

the system design is reliable over its power supply, temperature, and output/input

loading variables. National does not recommend operation of FACT TM circuits outside

databook specifications.

Recommended Operating Conditions

Supply Voltage (Vcc) 4.5V to 5.5V

Input Voltage (Vi) 0V to Vcc

Output Voltage (Vo) 0V to Vcc

Operating Temperature (Ta) -55 C to +125 C

Minimum Input Edge Rate (Delta V/Delta t)

ACT Devices

Vin from 0.8V to 2.0V 125 mV/nsVcc @ 4.5V, 5.5V

MN54ACT373-X REV 1B0 MICROCIRCUIT DATA SHEET

Electrical Characteristics

DC PARAMETERS

(The following conditions apply to all the following parameters, unless otherwise specified.)

DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 3 IS GUARANTEED BUT NOT

TESTED.

SYMBOL PARAMETER CONDITIONS NOTES PIN-

NAME MIN MAX UNIT SUB-

GROUPS

IIH High Level Input

Current VCC=5.5V, VM=5.5V 1, 2 INPUT 0.1 uA 1

1, 2 INPUT 1.0 uA 2, 3

IIL Low Level Input

Current VCC=5.5V, VM=0.0V 1, 2 INPUT -0.1 uA 1

1, 2 INPUT -1.0 uA 2, 3

VOL Low Level Output

Voltage VCC=4.5V, VIL=0.8V, VIH=2.0V,

IOL=50.0uA 1, 2 OUTPUT .10 V 1, 2,

VCC=5.5V, VIL=0.8V, VIH=2.0V,

IOL=50.0uA 1, 2 OUTPUT .10 V 1, 2,

VCC=4.5V, VIL=0.8V, VIH=2.0V,

IOL=24.0mA 1, 2 OUTPUT .36 V 1

1, 2 OUTPUT .50 V 2, 3

VCC=5.5V, VIL=0.8V, VIH=2.0V,

IOL=24.0mA 1, 2 OUTPUT .36 V 1

1, 2 OUTPUT .50 V 2, 3

VIOL Dynamic Output

Current LOW VCC=5.5V, VIL=0.8V, VIH=2.0V,

IOL=50.0mA 1,

2, 5 OUTPUT 1.65 V 1, 2,

VOH High Level Output

Voltage VCC=4.5V, VIL=0.8V, VIH=2.0V,

IOH=-50.0uA 1, 2 OUTPUT 4.40 V 1, 2,

VCC=5.5V, VIL=0.8V, VIH=2.0V,

IOH=-50.0uA 1, 2 OUTPUT 5.40 V 1, 2,

VCC=5.5V, VIL=0.8V, VIH=2.0V,

IOH=-24.0mA 1, 2 OUTPUT 4.86 V 1

1, 2 OUTPUT 4.70 V 2, 3

VCC=4.5V, VIL=0.8V, VIH=2.0V,

IOH=-24.0mA 1, 2 OUTPUT 3.86 V 1

1, 2 OUTPUT 3.70 V 2, 3

VIOH Dynamic Output

Current HIGH VCC=5.5V, VIL=0.8V, VIH=2.0V,

IOH=-50.0mA 1,

2, 5 OUTPUT 3.85 V 1, 2,

IOZH Maximum TRI-STATE

Leakage Current VCC=4.5V, VIH=2.0V, VM=4.5V,

VINH=4.5V, VINL=0.0V 1, 2 OUTPUT 0.25 uA 1

1, 2 OUTPUT 5.0 uA 2, 3

VCC=5.5V, VIH=2.0V, VM=5.5V,

VINH=5.5V, VINL=0.0V 1, 2 OUTPUT 0.25 uA 1

1, 2 OUTPUT 5.0 uA 2, 3

IOZL Maximum TRI-STATE

Leakage Current VCC=4.5V, VIH=2.0V, VM=0.0V, VINH=4.5V 1, 2 OUTPUT -0.25 uA 1

1, 2 OUTPUT -5.0 uA 2, 3

VCC=5.5V, VIH=2.0V, VM=0.0V, VINH=5.5V 1, 2 OUTPUT -0.25 uA 1

1, 2 OUTPUT -5.0 uA 2, 3

MN54ACT373-X REV 1B0 MICROCIRCUIT DATA SHEET

Electrical Characteristics

DC PARAMETERS(Continued)

(The following conditions apply to all the following parameters, unless otherwise specified.)

DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 3 IS GUARANTEED BUT NOT

TESTED.

SYMBOL PARAMETER CONDITIONS NOTES PIN-

NAME MIN MAX UNIT SUB-

GROUPS

ICCH Supply Current

Outputs HIGH VCC=5.5V, VINH=5.5V, VINL=0.0V 1, 2 VCC 4.0 uA 1

1, 2 VCC 80 uA 2, 3

ICCL Supply Current

Outputs LOW VCC=5.5V, VINH=5.5V, VINL=0.0V 1, 2 VCC 4.0 uA 1

1, 2 VCC 80 uA 2, 3

ICCZ Supply Current

Outputs Tri-State VCC=5.5V, VINH=5.5V, VINL=0.0V 1, 2 VCC 4.0 uA 1

1, 2 VCC 80 uA 2, 3

ICCT Supply Current

per Input VCC=5.5V, VIHT=VCC-2.1V 1, 2 VCC 1.0 mA 1

1, 2 VCC 1.6 mA 2, 3

AC PARAMETERS

(The following conditions apply to all the following parameters, unless otherwise specified.)

AC: CL=50pF, RL=500 OHMS, TRISE/TFALL=3.0nS, Temp Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 11

IS GUARANTEED BUT NOT TESTED.

tpLH(1) Propagation Delay VCC=4.5V 3,

4, 7 Dn to

On 1.5 10.5 ns 9

4, 7 Dn to

On 1.5 12.5 ns 10, 11

tpHL(1) Propagation Delay VCC=4.5V 3,

4, 7 Dn to

On 1.5 10.5 ns 9

4, 7 Dn to

On 1.5 12.5 ns 10, 11

tpLH(2) Propagation Delay VCC=4.5V 3,

4, 7 Le to

On 1.5 10.5 ns 9

4, 7 Le to

On 1.5 12.5 ns 10, 11

tpHL(2) Propagation Delay VCC=4.5V 3,

4, 7 Le to

On 1.5 10.0 ns 9

4, 7 Le to

On 1.5 11.5 ns 10, 11

tpZH Output Enable VCC=4.5V 3,

4, 7 OE to

On 1.5 9.5 ns 9

4, 7 OE to

On 1.5 11.5 ns 10, 11

tpZL Output Enable VCC=4.5V 3,

4, 7 OE to

On 1.5 9.0 ns 9

4, 7 OE to

On 1.5 11.0 ns 10, 11

MN54ACT373-X REV 1B0 MICROCIRCUIT DATA SHEET

Electrical Characteristics

AC PARAMETERS(Continued)

(The following conditions apply to all the following parameters, unless otherwise specified.)

AC: CL=50pF, RL=500 OHMS, TRISE/TFALL=3.0nS, Temp Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 11

IS GUARANTEED BUT NOT TESTED.

SYMBOL PARAMETER CONDITIONS NOTES PIN-

NAME MIN MAX UNIT SUB-

GROUPS

tpHZ Output Enable VCC=4.5V 3,

4, 7 OE to

On 1.5 11.0 ns 9

4, 7 OE to

On 1.5 14.0 ns 10, 11

tpLZ Output Enable VCC=4.5V 3,

4, 7 OE to

On 1.5 9.0 ns 9

4, 7 OE to

On 1.5 11.0 ns 10, 11

ts(H/L) Setup Time HIGH

or LOW VCC=4.5V 6 Dn to

Le 7.0 ns 9

6 Dn to

Le 8.5 ns 10, 11

th(H/L) Setup Time HIGH

or LOW VCC=4.5V 6 Dn to

Le 0.0 ns 9

6 Dn to

Le 1.0 ns 10, 11

tw(H) Pulse Width HIGH VCC=4.5V 6 Le

PULSE 7.0 ns 9

6Le

PULSE 8.5 ns 10, 11

Note 1: SCREEN TESTED 100% ON EACH DEVICE AT +25C & +125C TEMPERATURE, SUBGROUPS 1, 2, 7, &

Note 2: SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE,

SUBGROUPS A1, 2, 7, & 8.

Note 3: SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY, SUBGROUP A9.

Note 4: SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE,

SUBGROUPS A9 & 10.

Note 5: TRANSMISSION LINE DRIVING TEST, GUARDBAND LIMITS SET FOR +25C, 2 MSEC DURATION MAX.

Note 6: GUARANTEED BUT NOT TESTED (DESIGN CHARACTERIZATION DATA).

Note 7: +25C & +125C MIN LIMITS GUARANTEED FOR 5.5V BY GUARDBANDING 4.5V MINIMUM LIMITS.