Economy Trimmers
Type 416 Series
1773119 CIS BI 11/2011 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help
and inches unless otherwise reference purposes only.
specified. Values in brackets Specifications subject
are standard equivalents. to change.
Key Features
IStable High Resolution
Cermet Element
ISpace-Saving Device
I0.2 Watt Rating at 70°C
IWide Value Range
IAvailable Taped for
Auto Insertion
IDust and Splash Proof
ITop or Side Adjustment
IAuto Adjust Head Available
IWidely Available via
Distribution
This tiny 6mm square cermet trimmer is offered with alternative adjustment covers for screwdriver
and automatic setting and can be supplied in bulk or taped in ammo pack. The 416 can be
adjusted from the top or side and is an inexpensive solution to high reliability potentiometer
requirements. This series is used to replace some of the larger, expensive, sealed types in
high volume circuits.
Characteristics - Electrical
Resistance Range: 100R to 1M
Resistance Values: 1, 2, 5 in each decade
Resistance Tolerance: ± 25%, (±20% by selection)
End Resistance: 1% Nominal or 10 ohms maximum,
whichever is greater.
Wiper Current: 50mA
Power Rating: 0.2W at 70°C Derating to zero at 100°C
Limiting Element Voltage: 100V DC or AC RMS maximum
Rotational Noise (CRV): 3% maximum
Temperature Coefficient: ±250ppm/°C
Characteristics - Mechanical
End Stop: 50 mNm minimum
Starting Torque: 30 mNm maximum
Mechanical Adjustment: 240° nominal
Operational Life: 100 turns
Characteristics - Environmental
Temperature Range: - 25°C to + 100°C
Load Life at 70°C: ΔR < 5% after 1000 hours
Sealing: Dust Proof
Climatic Category: 25/100/21
416M
How to Order
416 P A 104 M
Common Part
P - Top Adjust
2.5mm x 5.0mm
M - Top Adjust
5.0mm x 5.0mm
X - Side Adjust
2.5mm x 5.0mm
Adjustment Style /
Configuration A - Cross Slot
R - Auto Adjust
X - Skeleton
Adjustment Head Resistance Value
416 -
6mm Low Cost Trimmer
The first two digits are
significant figures of
resistance value and the
third denotes the number
of zeros following.
e.g. 100R: 101
1K0: 102
10K: 103
100K: 104
Tolerance
P - 25%
(M - 20%
by selection only)
Please state top or side adjustments on all orders
Dimensions
416P
416X
Economy Trimmers
Type 416 Series
TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.
Other logos, product and Company names mentioned herein may be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other
representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein
at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantabili-
ty or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
