EB13K4 Series
• Crystal Clock Oscillators
• LVCMOS Output
• +3.3V Supply Voltage
• Tri-State Output Function
• 4 Pad Ceramic SMD Package
• Low Stand-by Current
• RoHS Compliant (Pb-Free) OSCILLATOR
EB13K4
NOTES
____________________________________________________________________________________________________________
___________________________________________________________________________________________
_________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.
MANUFACTURER CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS REV.DATE
ECLIPTEK CORP. OSCILLATOR EB13K4 CERAMIC 3.3V OS8W 07/11
ELECTRICAL SPECIFICATIONS
Inclusive of all conditions: Calibration Tolerance at 25°C,
Frequency Stability over the Operating Temperature Range,
Supply Voltage Change, Output Load Change, First Year Aging
at 25°C, Shock, and Vibration
20% to 80% of Waveform
at 50% of Waveform
VIH : 90% of VDD Minimum or No Connection
VIL : 10% of VDD Maximum
Disabled Output: High Impedance
Frequency Range
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VDD)
Input Current
Frequency Tolerance / Stability
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
Load Drive Capability
Output Logic Type
Duty Cycle
Tri-State Input Voltage
Standby Current
Aging (at 25°C)
Start Up Time
32.768kHz
0°C to +70°C or -40°C to +85°C
-55°C to +125°C
3.3VDC ±10%
1mA Maximum
±100ppm Maximum
±50ppm Maximum
±25ppm Maximum
±20ppm Maximum
90% of VDD Minimum IOH = -4mA
10% of VDD Maximum IOL = +4mA
20nSeconds Maximum
15pF Maximum
CMOS
50 ±5(%)
Enables Output
Disables Output: High Impedance
10µA Maximum
±5ppm / year Maximum
10mSeconds Maximum
H 0.9
L 3.2
W 2.5
EB13K4 F 2 H - 32.768K TR
FREQUENCY TOLERANCE / STABILITY
C = ±100ppm Maximum over 0°C to +70°C
D = ±50ppm Maximum over 0°C to +70°C
E = ±25ppm Maximum over 0°C to +70°C
F = ±20ppm Maximum over 0°C to +70°C
G = ±100ppm Maximum over -40°C to +85°C
H = ±50ppm Maximum over -40°C to +85°C
J = ±25ppm Maximum over -40°C to +85°C
DUTY CYCLE
2 = 50 ±5(%)
PART NUMBERING GUIDE
800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.
AVAILABLE OPTIONS
Blank = Bulk
TR = Tape & Reel
FREQUENCY
OUTPUT CONTROL FUNCTION
H = Tri-State (High Impedance)
MANUFACTURER CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS REV.DATE
ECLIPTEK CORP. OSCILLATOR EB13K4 CERAMIC 3.3V OS8W 07/11
*Compliant to EIA 481A
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
MARKING SPECIFICATIONS
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
Tolerances= +0.1
Pin 1: Tri-State
Pin 2: Case Ground
Pin 3: Output
Pin 4: Supply Voltage
MARKING
ORIENTATION
3.20
±0.15
2.50
±0.15
0.90 ±0.20
0.75 ±0.10
1.20
±0.10
1.00
±0.10
1.00
±0.10
1
23
4
M N O P Q
1.5 MIN 50 MIN 20.2 MIN 13.0±0.5 40 MIN
R S T U V
QTY/REEL
2.5 MIN 10 MIN 14.4 MAX 180 MAX 8.4+1.5-0 1,000
REEL
A B C D E F
8.0±0.2 3.5±0.1 2.75±0.1 4.0±0.1 2.0±0.1
F G H J K L
4.0±0.1 2.7±.1 1.55 +0.5 3.4±.1 0.25 ±0.05 1.4±.1
TAPE
PARAMETER Specification
ESD Susceptibility MIL-STD-883, Method 3015, Class 1, HBM: 1500V
Fine Leak Test MIL-STD-883, Method 1014, Condition A
Flammability UL94-V0
Gross Leak Test MIL-STD-883, Method 1014, Condition C
Mechanical Shock MIL-STD-883, Method 2002, Condition B
Moisture Resistance MIL-STD-883, Method 1004
Moisture Sensitivity J-STD-020, MSL 1
Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K
Resistance to Solvents MIL-STD-202, Method 215
Solderability MIL-STD-883, Method 2003
Temperature Cycling MIL-STD-883, Method 1010, Condition B
Vibration MIL-STD-883, Method 2007, Condition A
Line 1: E32.7
Frequency in kHz (3 digits Maximum + Decimal)
Line 2: XXXXX
Eclipitek Manufacturing Identifier
