© Semiconductor Components Industries, LLC, 2015
July, 2019 Rev. 3
1Publication Order Number:
NVMFS5C426N/D
NVMFS5C426N
MOSFET – Power, Single,
N-Channel
40 V, 1.3 mW, 235 A
Features
Small Footprint (5x6 mm) for Compact Design
Low RDS(on) to Minimize Conduction Losses
Low QG and Capacitance to Minimize Driver Losses
NVMFS5C426NWF Wettable Flank Option for Enhanced Optical
Inspection
AECQ101 Qualified and PPAP Capable
These Devices are PbFree and are RoHS Compliant
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Parameter Symbol Value Unit
DraintoSource Voltage VDSS 40 V
GatetoSource Voltage VGS ±20 V
Continuous Drain
Current RqJC
(Notes 1, 3) Steady
State
TC = 25°CID235 A
TC = 100°C 166
Power Dissipation
RqJC (Note 1)
TC = 25°CPD128 W
TC = 100°C 64
Continuous Drain
Current RqJA
(Notes 1, 2, 3) Steady
State
TA = 25°CID41 A
TA = 100°C 29
Power Dissipation
RqJA (Notes 1 & 2)
TA = 25°CPD3.8 W
TA = 100°C 1.9
Pulsed Drain Current TA = 25°C, tp = 10 msIDM 900 A
Operating Junction and Storage Temperature TJ, Tstg 55 to
+ 175
°C
Source Current (Body Diode) IS122 A
Single Pulse DraintoSource Avalanche
Energy (IL(pk) = 19 A)
EAS 739 mJ
Lead Temperature for Soldering Purposes
(1/8 from case for 10 s)
TL260 °C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
THERMAL RESISTANCE MAXIMUM RATINGS
Parameter Symbol Value Unit
JunctiontoCase Steady State RqJC 1.2 °C/W
JunctiontoAmbient Steady State (Note 2) RqJA 39
1. The entire application environment impacts the thermal resistance values shown,
they are not constants and are only valid for the particular conditions noted.
2. Surfacemounted on FR4 board using a 650 mm2, 2 oz. Cu pad.
3. Maximum current for pulses as long as 1 second is higher but is dependent
on pulse duration and duty cycle.
MARKING
DIAGRAM
www.onsemi.com
XXXXXX
AYWZZ
V(BR)DSS RDS(ON) MAX ID MAX
40 V 1.3 mW @ 10 V 235 A
G (4)
S (1,2,3)
NCHANNEL MOSFET
D (5,6)
S
S
S
G
D
D
D
D
DFN5
(SO8FL)
CASE 488AA
STYLE 1
1
See detailed ordering, marking and shipping information in the
package dimensions section on page 5 of this data sheet.
ORDERING INFORMATION
XXXXXX = 5C426N
XXXXXX = (NVMFS5C426N) or
XXXXXX = 426NWF
XXXXXX = (NVMFS5C426NWF)
A = Assembly Location
Y = Year
W = Work Week
ZZ = Lot Traceability
NVMFS5C426N
www.onsemi.com
2
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter Symbol Test Condition Min Typ Max Unit
OFF CHARACTERISTICS
DraintoSource Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA40 V
DraintoSource Breakdown Voltage
Temperature Coefficient
V(BR)DSS/
TJ
9.6 mV/°C
Zero Gate Voltage Drain Current IDSS VGS = 0 V,
VDS = 40 V
TJ = 25°C 10
mA
TJ = 125°C 100
GatetoSource Leakage Current IGSS VDS = 0 V, VGS = 20 V 100 nA
ON CHARACTERISTICS (Note 4)
Gate Threshold Voltage VGS(TH) VGS = VDS, ID = 170 mA2.5 3.5 V
Threshold Temperature Coefficient VGS(TH)/TJ8.6 mV/°C
DraintoSource On Resistance RDS(on) VGS = 10 V ID = 50 A 1.1 1.3 mW
Forward Transconductance gFS VDS =15 V, ID = 50 A 145 S
CHARGES, CAPACITANCES & GATE RESISTANCE
Input Capacitance CISS
VGS = 0 V, f = 1 MHz, VDS = 25 V
4300
pF
Output Capacitance COSS 2100
Reverse Transfer Capacitance CRSS 59
Total Gate Charge QG(TOT) VGS = 10 V, VDS = 20 V; ID = 50 A 65
nC
Threshold Gate Charge QG(TH)
VGS = 10 V, VDS = 20 V; ID = 50 A
13
GatetoSource Charge QGS 20
GatetoDrain Charge QGD 12
Plateau Voltage VGP 4.7 V
SWITCHING CHARACTERISTICS (Note 5)
TurnOn Delay Time td(ON)
VGS = 10 V, VDS = 20 V,
ID = 50 A, RG = 2.5 W
15
ns
Rise Time tr47
TurnOff Delay Time td(OFF) 36
Fall Time tf9.0
DRAINSOURCE DIODE CHARACTERISTICS
Forward Diode Voltage VSD VGS = 0 V,
IS = 50 A
TJ = 25°C 0.82 1.2
V
TJ = 125°C 0.68
Reverse Recovery Time tRR
VGS = 0 V, dIS/dt = 100 A/ms,
IS = 50 A
63
ns
Charge Time ta34
Discharge Time tb29
Reverse Recovery Charge QRR 92 nC
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
4. Pulse Test: pulse width v 300 ms, duty cycle v 2%.
5. Switching characteristics are independent of operating junction temperatures.
NVMFS5C426N
www.onsemi.com
3
TYPICAL CHARACTERISTICS
0
20
40
60
80
100
120
012345
Figure 1. OnRegion Characteristics Figure 2. Transfer Characteristics
VDS, DRAINTOSOURCE VOLTAGE (V) VGS, GATETOSOURCE VOLTAGE (V)
Figure 3. OnResistance vs. GatetoSource
Voltage
Figure 4. OnResistance vs. Drain Current and
Gate Voltage
VGS, GATETOSOURCE VOLTAGE (V) ID, DRAIN CURRENT (A)
Figure 5. OnResistance Variation with
Temperature
Figure 6. DraintoSource Leakage Current
vs. Voltage
TJ, JUNCTION TEMPERATURE (°C) VDS, DRAINTOSOURCE VOLTAGE (V)
ID, DRAIN CURRENT (A)
ID, DRAIN CURRENT (A)
RDS(on), DRAINTOSOURCE RESISTANCE (mW)
RDS(on), DRAINTOSOURCE RESISTANCE (mW)
RDS(on), NORMALIZED DRAINTO
SOURCE RESISTANCE
IDSS, LEAKAGE (A)
4.0 V
4.4 V
TJ = 125°C
TJ = 25°C
TJ = 55°C
TJ = 25°C
ID = 50 A
TJ = 25°C
VGS = 10 V
VGS = 10 V
ID = 50 A
TJ = 125°C
TJ = 85°C
VDS = 10 V
TJ = 150°C
10 V to
6.0 V
0
20
40
60
80
100
120
0.0 0.5 1.0 1.5 2.0 2.5 3.0
4.8 V
5.2 V
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
3.0 4.0 5.0 6.0 7.0 8.0 9.0 10 0 20 40 80 100 200
2.2
1.8
1.4
1.0
0.6
60
0.6
0.8
1.0
1.2
1.4
1.6
1.8
50 25 0 25 50 75 100 125 150 175
1.E07
1.E06
1.E05
1.E04
1.E03
5152535
140
160
180
200
140
160
180
200
67
2.0
1.6
1.2
0.8
120 160 180140
10 20 30 40
220
240
260
280
300
220
240
260
280
300
NVMFS5C426N
www.onsemi.com
4
TYPICAL CHARACTERISTICS
Figure 7. Capacitance Variation Figure 8. GatetoSource and
DraintoSource Voltage vs. Total Charge
VDS, DRAINTOSOURCE VOLTAGE (V) QG, TOTAL GATE CHARGE (nC)
Figure 9. Resistive Switching Time Variation
vs. Gate Resistance
Figure 10. Diode Forward Voltage vs. Current
RG, GATE RESISTANCE (W)VSD, SOURCETODRAIN VOLTAGE (V)
Figure 11. Safe Operating Area Figure 12. IPEAK vs. Time in Avalanche
VDS, DRAINTOSOURCE VOLTAGE (V) TIME IN AVALANCHE (s)
C, CAPACITANCE (pF)
VGS, GATETOSOURCE VOLTAGE (V)
t, TIME (ns)
IS, SOURCE CURRENT (A)
ID, DRAIN CURRENT (A)
IPEAK, (A)
VGS = 0 V
TJ = 25°C
f = 1 MHz
CISS
COSS
CRSS
VDS = 20 V
ID = 50 A
TJ = 25°C
QGS QGD
VGS = 10 V
VDD = 20 V
ID = 50 A
td(off) td(on)
tf
tr
TJ = 150°C
TJ = 25°CTJ = 55°C
TJ = 100°C
TJ = 25°C
RDS(on) Limit
Thermal Limit
Package Limit
0.5 ms
1 ms
10 ms
TC = 25°C
VGS 10 V
Single Pulse
10
100
1000
10000
0 10203040
0
2
4
6
8
10
0204050
QT
1.0
10
1000
1 10 100 1.0
10
0.4 0.5 0.6 0.7 0.8 0.9 1.0
1000
1 10 1000.1
100
10
1
0.1 1
10
100
1E41E3 10E2
5152535 10 30
1
3
5
7
9
100
0.3
TJ = 125°C
VGS = 0 V
60
100
10 ms
NVMFS5C426N
www.onsemi.com
5
TYPICAL CHARACTERISTICS
0.01
0.1
1
10
100
0.000001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000
Figure 13. Thermal Characteristics
PULSE TIME (sec)
RqJA (°C/W)
Single Pulse
50% Duty Cycle
20%
10%
5%
2%
1%
DEVICE ORDERING INFORMATION
Device Marking Package Shipping
NVMFS5C426NT1G 5C426N DFN5
(PbFree)
1500 / Tape & Reel
NVMFS5C426NWFT1G 426NWF DFN5
(PbFree, Wettable Flanks)
1500 / Tape & Reel
NVMFS5C426NT3G 5C426N DFN5
(PbFree)
5000 / Tape & Reel
NVMFS5C426NWFT3G 426NWF DFN5
(PbFree, Wettable Flanks)
5000 / Tape & Reel
NVMFS5C426NAFT1G 5C426N DFN5
(PbFree)
1500 / Tape & Reel
NVMFS5C426NWFAFT1G 426NWF DFN5
(PbFree, Wettable Flanks)
1500 / Tape & Reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
M3.00 3.40
q0 −−−
_
3.80
12
_
DFN5 5x6, 1.27P
(SO−8FL)
CASE 488AA
ISSUE N DATE 25 JUN 201
8
SCALE 2:1
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION D1 AND E1 DO NOT INCLUDE
MOLD FLASH PROTRUSIONS OR GATE
BURRS.
XXXXXX = Specific Device Code
A = Assembly Location
Y = Year
W = Work Week
ZZ = Lot Traceability
1234
TOP VIEW
SIDE VIEW
BOTTOM VIEW
D1
E1 q
D
E
2
2
B
A
0.20 C
0.20 C
2 X
2 X
DIM MIN NOM
MILLIMETERS
A0.90 1.00
A1 0.00 −−
b0.33 0.41
c0.23 0.28
D5.15
D1 4.70 4.90
D2 3.80 4.00
E6.15
E1 5.70 5.90
E2 3.45 3.65
e1.27 BSC
G0.51 0.575
K1.20 1.35
L0.51 0.575
L1 0.125 REF
A
0.10 C
0.10 C
DETAIL A
14
L1
e/2
8X
D2
G
E2
K
b
A0.10 B
C
0.05 cL
DETAIL A
A1
c
4 X
C
SEATING
PLANE
GENERIC
MARKING DIAGRAM*
1
XXXXXX
AYWZZ
1
MAX
1.10
0.05
0.51
0.33
5.10
4.20
6.10
3.85
0.71
1.50
0.71
STYLE 1:
PIN 1. SOURCE
2. SOURCE
3. SOURCE
4. GATE
5. DRAIN
M
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
1.270
2X
0.750
1.000
0.905
4.530
1.530
4.5600.495
3.200
1.330
0.965
2X
2X
4X
4X
PIN 5
(EXPOSED PAD)
STYLE 2:
PIN 1. ANODE
2. ANODE
3. ANODE
4. NO CONNECT
5. CATHODE
5.00 5.30
6.00 6.30
PITCH
DIMENSIONS: MILLIMETERS
1
RECOMMENDED
e
2X
0.475
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “ G”,
may or may not be present. Some product
s
may not follow the Generic Marking.
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
98AON14036D
DOCUMENT NUMBER:
DESCRIPTION:
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
DFN5 5x6, 1.27P (SO−8FL)
© Semiconductor Components Industries, LLC, 2018 www.onsemi.com
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/PatentMarking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 8002829855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative