www.cor.com - Libertyville, IL (847) 680-7400
Minimum insertion loss in dB:
Line-to-ground in 50 ohm circuit
CurrentFrequency-MHz
Rating.01.1.5110501005001000
3A1080888810010010010085
6A2659808010010010010085
Line-to-line in 50 ohm circuit
CurrentFrequency-MHz
Rating.01.1.5110501005001000
3A1051788810010010010085
6A1365869510010010010085
AQ Series
Corcom’s AQ series high frequency filters provide a low
cost solution to the problem of power line noise at high
frequencies.
With UL Recognition and CSA Certification, the AQ series
is readily available to the customer who requires high
common and differential mode performance from 10KHz
to 1GHz. Models with “F” suffix incorporate an IEC
connector and a fuseholder. Models with “S” suffix are
supplied with a switch.
The AQ series is ideal for Tempest applications, where
computers are used to process secret or confidential
information.
AQSeries
Electrical Schematics
3A Models
6A Models
Recommended Panel Cutouts
3A Models 6A Models
Maximum leakage current,
each line-to-ground
@ 120 VAC 60 Hz:
@ 250 VAC 50 Hz:
Hipot rating (one minute):
line-to-ground
line-to-line
Operating frequency:
Rated voltage:
1.2 mA
2.3 mA
2250 VDC
1450 VDC
50/60 Hz
120/250 VAC
.7mA
1.2 mA
Specifications
IEC SOCKET
SWITCH
FUSEHOLDER
Available Part Numbers
3VAQ3 6VAQ3
3VAQ8F6VAQ8F
3VAQ8FS6VAQ8FS
AQ
10
Resistor location for reference only.
3VAQ8F
6VAQ8F
High Frequency
Power Line Filter or
Power Entry Module
UL Recognized
CSA Certified
Ordering Information
Consult your local Corcom sales representative for pricing.
AQ
11
Case Styles and Dimensions
Metric shown in italics.
SeriesAQ
3VAQ3
3VAQ8F
3VAQ8FS
6VAQ3
6VAQ8FS
6VAQ8F
Libertyville, IL (847) 680-7400 - www.cor.com
