TPC15CAHM3/H - VISHAY - Datasheet.Directory

TPC11CA thru TPC36CA

www.vishay.com Vishay General Semiconductor

Revision: 14-Aug-2018 1Document Number: 87649

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Surface Mount PAR® Transient Voltage Suppressors

Bi-directional 1500 W TVS in TO-277 (SMPC) Package

DESIGN SUPPORT TOOLS

Note

• All electrical characteristics are only applicable when two

identical polarity terminals are connected.

FEATURES

• Junction passivation optimized PAR® design

•T

J = 185 °C capability suitable for high reliability

and automotive requirement

• Very low profile - typical height of 1.1 mm

• Ideal for automated placement

• Bi-directional

• Excellent clamping capability

• Low leakage current

• Very fast response time

• AEC-Q101 qualified

- Automotive ordering code: base P/NHM3

• Meet MSL level 1, per J-STD-020, LF maximum peak

of 260 °C

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS

Use in sensitive electronics protection against voltage

transients induced by inductive load switching and lighting

on ICs, MOSFET, signal lines of sensor units for automotive,

consumer, computer, industrial, and telecommunication.

MECHANICAL DATA

Case: SMPC (TO-277A)

Molding compound meets UL 94 V-0 flammability rating

Base P/NHM3 - halogen-free, RoHS-compliant, and

AEC-Q101 qualified

Terminals: matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

HM3 suffix meets JESD 201 class 2 whisker test

Polarity: no marking on bi-directional types

Note

(1) Non-repetitive current pulse per fig.3 and derated above TA = 25 °C

PRIMARY CHARACTERISTICS

VWM 9.4 V to 30.8 V

VBR (Bi-directional) 11 V to 36 V

PPPM 1500 W

TJ max. 185 °C

Polarity Bi-directional

Package SMPC (TO-277A)

SMPC (TO-277A)

eSMP

Series

Terminal 1

Terminal 2

click logo to get started

Available

Models

MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted)

PARAMETER SYMBOL VALUE UNIT

Peak power dissipation with a 10/1000 μs waveform (1) PPPM 1500 W

Peak pulse current with a 10/1000 μs waveform (1) IPPM See next table A

Operating junction and storage temperature range TJ, TSTG -65 to +185 °C

TPC11CA thru TPC36CA

www.vishay.com Vishay General Semiconductor

Revision: 14-Aug-2018 2Document Number: 87649

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

• All terms and symbols are consistent with ANSI/IEEE C62.35

(1) VBR measured after IT applied for 300 μs, IT = square wave pulse or equivalent

(2) Surge current waveform per fig.3

Note

(1) AEC-Q101 qualified

ELECTRICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted)

DEVICE

TYPE

DEVICE

MARKING

CODE

BREAKDOWN

VOLTAGE

VBR (1) AT IT

(V)

TEST

CURRENT

(mA)

STAND-OFF

VOLTAGE

VWM

(V)

MAXIMUM

REVERSE

LEAKAGE

AT VWM

(μA)

MAXIMUM

PEAK PULSE

SURGE

CURRENT

IPPM (2)

(A)

MAXIMUM

CLAMPING

VOLTAGE

AT IPPM

(V)

MIN. MAX.

TPC11CA BAF 10.5 11.6 1.0 9.40 5.0 96.2 15.6

TPC12CA BAG 11.4 12.6 1.0 10.2 2.0 89.8 16.7

TPC13CA BAH 12.4 13.7 1.0 11.1 2.0 82.4 18.2

TPC15CA BAI 14.3 15.8 1.0 12.8 1.0 70.8 21.2

TPC16CA BAJ 15.2 16.8 1.0 13.6 1.0 66.7 22.5

TPC18CA BAK 17.1 18.9 1.0 15.3 1.0 59.5 25.2

TPC20CA BAL 19.0 21.0 1.0 17.1 1.0 54.2 27.7

TPC22CA BAM 20.9 23.1 1.0 18.8 1.0 49.0 30.6

TPC24CA BAN 22.8 25.2 1.0 20.5 1.0 45.2 33.2

TPC27CA BAO 25.7 28.4 1.0 23.1 1.0 40.0 37.5

TPC30CA BAP 28.5 31.5 1.0 25.6 1.0 36.2 41.4

TPC33CA BAQ 31.4 34.7 1.0 28.2 1.0 32.8 45.7

TPC36CA BAR 34.2 37.8 1.0 30.8 1.0 30.1 49.9

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE

TPC11CAHM3/H (1) 0.10 H 1500 7" diameter plastic tape and reel

TPC11CAHM3/I (1) 0.10 I 6500 13" diameter plastic tape and reel

TPC11CA thru TPC36CA

www.vishay.com Vishay General Semiconductor

Revision: 14-Aug-2018 3Document Number: 87649

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C, unless otherwise noted)

Fig. 1 - Peak Pulse Power Rating Curve

Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature

Fig. 3 - Pulse Waveform

Fig. 4 - Typical Junction Capacitance

Note

• Fig.1 power calculation is based on IPPM, times defined maximum clamping voltage by pulse width.

0.1

100

10 100 1000 10 000

PPPM - Peak Pulse Power (kW)

td-Pulse Width (μs)

TA= 25 °C

Non-repetitive pulse

waveform shown in

Fig.3

100

050100150200

Peak Pulse Power (PPP) or Current (I PP)

Derating in Percentage,%

TJ- Initial Temperature (°C)

100

150

0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0

IPPM - Peak Pulse Current, % IRSM

tp-Time (ms)

TJ= 25 °C

pulse width (td) is dened

as the point where the peak

tr= 10 μs

Peak value IPPM

Half value - IPP/2

IPPM

10/1000 μs waveform

as dened by R.E.A.

100

1000

10 000

10 100

CJ- Junction Capacitance (pF)

VBR - Breakdown Voltage (V)

Measured at stand-off

voltage, VWM

Measured at zero bias

TJ= 25 °C

f = 1.0 MHz

TPC11CA thru TPC36CA

www.vishay.com Vishay General Semiconductor

Revision: 14-Aug-2018 4Document Number: 87649

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

Conform to JEDEC® TO-277A

SMPC (TO-277A)

0.016 (0.40)

0.006 (0.15)

0.047 (1.20)

0.039 (1.00)

0.146 (3.70)

0.134 (3.40)

0.087 (2.20)

0.075 (1.90)

0.189 (4.80)

0.173 (4.40)

0.049 (1.24)

0.037 (0.94)

0.053 (1.35)

0.041 (1.05)

0.030 (0.75) NOM.

0.084 (2.13) NOM.

0.155 (3.94)

NOM.

Mounting Pad Layout

0.268

(6.80)

0.186 (4.72)

MIN.

0.050 (1.27)

MIN.

0.041

(1.04)

0.055 (1.40)

MIN.

0.189 (4.80)

MIN.

0.187 (4.75)

0.175 (4.45)

0.262 (6.65)

0.250 (6.35)

0.242 (6.15)

0.238 (6.05)

0.171 (4.35)

0.167 (4.25)

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 01-Jan-2021 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.