DS90LV027 DS90LV027 LVDS Dual High Speed Differential Driver Literature Number: SNLS003B DS90LV027 LVDS Dual High Speed Differential Driver General Description Features The DS90LV027 is a dual LVDS driver device optimized for high data rate and low power applications. The DS90LV027 is a current mode driver allowing power dissipation to remain low even at high frequency. In addition, the short circuit fault current is also minimized. The device is in a 8-lead small Outline Package. The DS90LV027 has a flow-through design for easy PCB layout. The differential driver outputs provides low EMI with its low output swings typically 340 mV. Perfect for high speed transfer of clock and data. Pair with any of National's LVDS receivers. n n n n n n n n Ultra Low Power Dissipation Operating Range above 155 Mbps Flow-through pinout simplifies PCB layout Conforms to TIA/EIA-644 Standard 8-Lead SOIC Package Saves Space VCM 1V center around 1.2V Low Differential Output Swing Typical 340 mV Power Off Protection (outputs in high impedance) Connection Diagram Dual-In-Line 10002901 Order Number DS90LV027M See NS Package Number M08A Functional Diagram 10002902 10002903 (c) 2005 National Semiconductor Corporation DS100029 www.national.com DS90LV027 LVDS Dual High Speed Differential Driver August 2005 DS90LV027 Absolute Maximum Ratings (Note 1) Lead Temperature Range If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. ESD Rating (Note 4) Supply Voltage (VCC) Soldering (4 sec.) +260C 4.5 kV (HBM 1.5 k, 100 pF) -0.3V to +6V Input Voltage (DI) -0.3V to (VCC + 0.3V) Output Voltage (DO ) Recommended Operating Conditions -0.3V to +3.9V Maximum Package Power Dissipation @ +25C M Package 1190 mW Derate M Package Supply Voltage (VCC) 9.5 mW/C above +25C Storage Temperature Range Min Typ Max 3.0 3.3 3.6 V 0 25 70 C Temperature (TA) -65C to +150C Units Electrical Characteristics Over Supply Voltage and Operating Temperature ranges, unless otherwise specified. (Notes 2, 3, 7) Symbol Parameter Conditions Pin Min Typ Max Units DO+, DO- 250 340 450 mV 0 10 35 mV 1.43 1.6 DIFFERENTIAL DRIVER CHARACTERISTICS VOD Output Differential Voltage VOD VOD Magnitude Change VOH Output High Voltage VOL Output Low Voltage 0.9 1.09 VOS Offset Voltage 0.9 1.25 1.6 V VOS Offset Magnitude Change 0 5 25 mV IOZD TRI-STATE (R) Leakage VOUT = VCC or GND 0 Power-off Leakage VOUT = 3.6V or GND, VCC = 0V 0 10 10 A IOXD 1 1 IOSD Output Short Circuit Current -4 -6 mA VIH Input High Voltage VIL Input Low Voltage RL = 100 (Figure 1) DI IIH Input High Current VIN = 3.6V or 2.4V IIL Input Low Current VIN = GND or 0.5V VCL Input Clamp Voltage ICL = -18 mA ICC Power Supply Current No Load A 2.0 VCC V GND 0.8 V 10 10 A 1 1 -1.5 VIN = VCC or GND V V A -0.8 VCC RL = 100 V 1 4 mA 8 11 mA Switching Characteristics Over Supply Voltage and Operating Temperature Ranges, unless otherwise specified. (Notes 5, 6) Symbol Parameter Conditions Min Typ Max Units DIFFERENTIAL DRIVER CHARACTERISTICS tPHLD Differential Propagation Delay High to Low tPLHD Differential Propagation Delay Low to High RL = 100, CL = 5 pF (Figure 2 and Figure 3) 1.5 3.4 6 ns 1.5 3.5 6 ns tSKD Differential Skew |tPHLD - tPLHD| 0 0.1 1.9 ns tTLH Transition Low to High Time 0 1 3 ns tTHL Transition High to Low Time 0 1 3 ns Note 1: "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices should be operated at these limits. The table of "Electrical Characteristics" specifies conditions of device operation. Note 2: Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground except VOD. Note 3: All typicals are given for: VCC = +3.3V and TA = +25C. Note 4: ESD Rating: HBM (1.5 k, 100 pF) 4.5 kV Note 5: CL includes probe and fixture capacitance. Note 6: Generator waveform for all tests unless otherwise specified: f = 1 MHz, ZO = 50, tr 6 ns, tf 6 ns (10%-90%). Note 7: The DS90LV027 is a current mode device and only function with datasheet specification when a resistive load is applied to the drivers outputs. www.national.com 2 DS90LV027 Parameter Measurement Information 10002904 FIGURE 1. Differential Driver DC Test Circuit 10002905 FIGURE 2. Differential Driver Propagation Delay and Transition Time Test Circuit 10002906 FIGURE 3. Differential Driver Propagation Delay and Transition Time Waveforms Application Information TABLE 1. Device Pin Descriptions Truth Table Pin # Name 2, 3 DI DO- 6, 7 DO+ Non-inverting driver output pin H 5, 8 DO- Inverting driver output pin Input/Output DI DO+ L L H H L 4 DI > 0.8V and DI < 2.0V X X 1 H = Logic high level L = Logic low level X = indeterminant 3 GND VCC Description TTL/CMOS driver input pins Ground pin Positive power supply pin, +3.3V 0.3V www.national.com DS90LV027 LVDS Dual High Speed Differential Driver Physical Dimensions inches (millimeters) unless otherwise noted Order Number DS90LV027M NS Package Number M08A National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. For the most current product information visit us at www.national.com. LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. BANNED SUBSTANCE COMPLIANCE National Semiconductor manufactures products and uses packing materials that meet the provisions of the Customer Products Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain no ``Banned Substances'' as defined in CSP-9-111S2. Leadfree products are RoHS compliant. National Semiconductor Americas Customer Support Center Email: new.feedback@nsc.com Tel: 1-800-272-9959 www.national.com National Semiconductor Europe Customer Support Center Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Francais Tel: +33 (0) 1 41 91 8790 National Semiconductor Asia Pacific Customer Support Center Email: ap.support@nsc.com National Semiconductor Japan Customer Support Center Fax: 81-3-5639-7507 Email: jpn.feedback@nsc.com Tel: 81-3-5639-7560 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP(R) Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page www.ti.com/video e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2011, Texas Instruments Incorporated