CAT.8100Y
ALUMINUM ELECTROLYTIC CAPACITORS
HDseries
High Ripple Low Impedance
Lower impedance at high frequency range.
Smaller case size and high ripple current.
Compliant to the RoHS directive (2002/95/EC).
Specifications
HD
HC
Approved by Reliability Center for Electronic
Component, Japan-Certification No. RCJ-03-23C
Dimension table in next page.
Low
Impedance
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Radial Lead Type Type numbering system (Example : 10V 3300
µ
F)
U
1H
2D
31
4A
53
63
72
8M
9H
10 D
11 12
15MIN 4MIN
(mm)
φD
P
φd
10
5.0
0.6
5
2.0
0.5
12.5
5.0 16
7.5
0.6 0.8
6.3
2.5
0.5 0.6
8
3.5
Size code
Configuration
Series name
Type
Pressure
relief vent
φd
(φ6.3up)
φD+0.5 MAX.
L+ MAX.
Capacitance tolerance (±20%)
Rated capacitance (3300µF)
Rated voltage (10V)
In case L > 25 for the φ12.5dia. unit, lead dia. φ d = 0.8mm.
(L < 20) 1.5
(L 20) 2.0
φ D
5
Pb-free leadwire
Pb-free PET sleeve
DD
6.3 ED
8 · 10 PD
12.5 ·16 HD
Configuration
Sleeve (P. E.T.)
P±0.5
Performance Characteristics
ltem
0.22 0.19 0.16 0.14 0.12 0.10
Category
Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Tangent of loss angle (tan
δ
)
Stability at Low Temperature
Endurance
Marking
–40 to +105˚C
6.3 to 50V
22 to 6800µF
±20% at 120Hz, 20˚C
After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater.
Rated voltage (V)
Rated voltage (V)
tan
δ
(MAX.)
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF.
Z–25˚C / Z+20˚C
Z–40˚C / Z+20˚C
Impedance ratio
ZT / Z20 (MAX.)
6.31016253550
222222
333333
6.31016253550
Printed with white color letter on black sleeve.
120Hz
20˚C
120Hz
HV
Smaller
• Please refer to page 20 about the end seal configulation.
Capacitance change
Leakage current
The specifications listed at right shall be met when
the capacitors are restored to 20˚C after D.C. bias
plus rated ripple current is applied for 5000 hours
(2000 hours for φD=5 and 6.3, 3000 hours for φD=8,
4000 hours for φD=10), at 105˚C, the peak voltage
shall not exceed the rated voltage.
tan δ
Within ±25% of the initial capacitance value
Less than or equal to the initial specified value
200% or less than the initial specified value